Articles - Future Manufacturing Technologies Group

2018

  1. Hamada A, Kisko A, Khosravifard A, Hassan M, Karjalainen LP & Porter D
    Ductility and formability of three high-Mn TWIP steels in quasi-static and high-speed tensile and Erichsen tests. Materials Science & Engineering A 712, 255–265.
     
  2. Järvenpää A, Jaskari M & Karjalainen LP
    Reversed Microstructures and Tensile Properties after Various Cold Rolling Reductions in AISI 301LN Steel. Metals 2018, 8, 109; doi:10.3390/met8020109.
     
  3. Sadegpour S, Abbasi S, Morakabati M, Kisko A, Karjalainen LP & Porter D
    A new multi-element beta titanium alloy with a high yield strength exhibiting transformation and twinning induced plasticity effects. - Scripta materialia 145, 104-108.

2017

  1. Ashiq M, Dhekne P, Hamada A S, Sahu P, Mahato B, Minz R K, Chowdhury S G & Karjalainen LP
    Correlation of Microstructure and Texture in a Two-Phase High-Mn Twinning-Induced Plasticity Steel During Cold Rolling, Metallurgical and Materials Transactions A, 48A, (10), 2017, 4842–4856. DOI: 10.1007/s11661-017-4241-4.
     
  2. Hamada A, Khosravifard A, Porter D & Karjalainen LP
    Physically based modeling and characterization of hot deformation behavior of twinning-induced plasticity steels bearing vanadium and niobium. - Materials science and engineering A: Structural materials: properties, microstructure and processing 703, 85-96.
  3. Järvenpää A, Jaskari M, Juuti T & Karjalainen LP
    Demonstrating the Effect of Precipitation on the Mechanical Stability of Fine-Grained Austenite in Reversion-Treated 301LN Stainless Steel. Metals 2017, 7, 344

  4. Järvenpää A,  Jaskari M, Man J & Karjalainen LP
    Austenite stability in reversion-treated structures of a 301LN steel under tensile loading. - Materials characterization 127, 12-26.

  5. Järvenpää A, Jaskari M, Man J & Karjalainen LP
    Stability of grain-refined reversed structures in a 301LN austenitic stainless steel under cyclic loading, Materials Science & Engineering A 703 (2017) 280–292.

  6. Mahato B, Sahu T, Shee S, Sahu P, Sawaguchi T, Kömi J & Karjalainen LP
    Simultaneous twinning nucleation mechanism in an Fe-Mn-Si-Al twinning induced plasticity steel. - Acta Materialia 132 (June), 264-275.

 

2016

  1. Ahmadkhaniha D, Järvenpää A, Jaskari M, Heydarzadeh Sohi M, Zarei-Hanzaki A, Fedel M, Deflorian F, Karjalainen LP
    Microstructural modification of pure Mg for improving mechanical and biocorrosion properties, Journal of the Mechanical Behavior of Biomedical Materials, 61, (8), 2016, 360–370.
     
  2. Behjati P, Kermanpur A, Karjalainen P, Järvenpää A, Jaskari M, Samaei Baghbadorani H, Najafizadeh A & Hamada A
    Influence of prior cold rolling reduction on microstructure and mechanical properties of a reversion annealed high-Mn austenitic steel, Materials Science & Engineering A, Vol. 650, 2016, P. 119-128.

 

2015

  1. Hamada A, Järvenpää A, Ahmed M, Jaskari M, Wynne B, Porter D & Karjalainen P
    The microstructural evolution of friction stir welded AA6082-T6 aluminum alloy during cyclic deformation, Materials Science & Engineering A642 (2015), P. 366–376.
     
  2. Järvenpää M, Jaskari M, Hietala M & Mäntyjärvi K
    Local reversion of cold formed AISI 301LN, Physics Procedia Vol. 78, 2015, P. 305-311.
     
  3. Järvenpää M, Jaskari M, Hietala M & Mäntyjärvi K
    Local laser heat treatments of steel sheets, Physics Procedia, Vol. 78, 2015, P. 296-304.
     
  4. Kananen M, Mäntyjärvi , Keskitalo M, Hietala M, Järvenpää A, Holappa K, Saine K & Teiskonen J
    Laser Welded Corrugated Steel Panels in Industrial Applications, Physics Procedia, Vol. 78, 2015, P. 202-209.
     
  5. Keskitalo M, Sundqvist J, Mäntyjärvi K, Powell J & Kaplan A
    The Influence of Shielding Gas and Heat Input on the Mechanical Properties of Laser Welds in Ferritic Stainless Steel, Physics Procedia, Vol. 78, 2015, P. 222-229.
     
  6. Keskitalo M, Mäntyjärvi K, Sundqvist J, Powell J &  Kaplan A
    Laser welding of duplex stainless steel with nitrogen as shielding gas, Journal of materials processing technology pp. 381-384.

 

2014

  1. Hamada A, Järvenpää A, Honkanen M, Jaskari M, Porter D & Karjalainen P
    Effects of cyclic pre-straining on mechanical properties of an austenitic microalloyed high-Mn twinning-induced plasticity steel, Procedia Engi-neering Vol. 74, 2014, P. 47–52.
     
  2. Järvenpää L, Karjalainen P & Jaskari M
    Effect of Grain Size on Fatigue Behaviour of Type 301ln Stainless Steel. International Journal of Fatique. Vol 65. pp 93-97.
     
  3. Järvenpää A, Jaskari M & Karjalainen P
    Effect of prior austenite grain structure on cyclic stability and crack formation in a direct-quenched ultra-high strength steel, Procedia Engineering Vol. 74.
     
  4. Järvenpää A, Lämsä J, Patard E & Mäntyjärvi K
    A Novel Heat Treatment Line for Pro-cessing of Tailored Small Batch Steels. - Key Engineering Materials 611-612, 804-810.
     
  5. Järvenpää A, Lämsä J, Hietala M & Mäntyjärvi K
    Mechanical properties of a sandwich panel manufactured using longitudinally laminated forming tools, Key Engineering Materials 611 - 612, 781-785.
     
  6. Kesti V, Kaijalainen A, Väisänen A, Järvenpää A, Määttä A, Arola A-M, Mäntyjärvi K & Ruoppa R
    Bendability and Microstructure of Direct Quenched Optim® 960QC, Material Science Forum Vols. 783-786, 2014, P. 818-824.
     
  7. Lämsä J, Järvenpää A & Mäntyjärvi K
    Designing and manufacturing of a flexible longitudinally laminated sand-wich panel forming tool, Key Engineering Materials Vols- 611-612.

 

2013

  1. Illikainen K, Holappa K & Mäntyjärvi K
    Quality Assurance of Laser Welded Axisymmetric Sandwich Structure. Key Engineering Materials Vol. 549, pp 529-534. Trans Tech Publications
     
  2. Järvenpää M, Jaskari L, Karjalainen P & Hietala M
    Enhancing mechanical properties and formability of AISI 301LN stainless steel sheet by local laser heat treatment. Key Engineering Materials, The Current State -of-the-Art on Material Forming. ISBN-13: 978-3-03785-719-9
     
  3. Keskitalo M & Mäntyjärvi K
    The influence of the shielding gas to the static and dynamic strength properties of laser welded work-hardened nitrogen alloyed austenitic stainless steel. Key Engineering Materials Vol. 549 pp 471-476.
     
  4. Kananen M, Hietala M & Mäntyjärvi K
    Rapid Manuifacturing of Shaped Die and Draw Punch Tools for Presses. Key Engineering Materials Vols. 554-557, pp 1814-1818, Trans Tech Publications
     
  5. Lämsä J, Väisänen A, Heikkala J & Järvenpää A
    Correlation of Tensile Test Parameters and Bendability of High-Strength Steels. Key Engineering Materials, The Current State-of-the-Art on Material Forming. ISBN-13: 978-3-03785-719-9

 

2012

  1. Kantola J, Mäntyjärvi K & Karjalainen J
    Laser Assisted Cutting of Abrasion Resistant Steel. International Journal of Key Engineering Materials Vol. 504-505, pp 1371-1376, Trans Tech Publications
     
  2. Kutuniva K, Karjalainen J & Mäntyjärvi K
    Effect of convex sheared punch geometry on cutting force of ultra-high-strength steel. International Journal of Key Engineering Materials Vol. 504-505, pp 901-906, Trans Tech Publications
     
  3. Määttä A, Järvenpää A, Jaskari M, Mäntyjärvi K & Karjalainen J
    Influence of Predetermined Surface Defect to the Bendability of Ultra-High-Strength Steel. International Journal of Key Engineering Materials Vol. 504-505, pp. 901-906, Trans Tech Publications

 

2011

  1. Kantola J, Mäntyjärvi K, Toppila R & Karjalainen J
    The Effects of Notch Manufacturing Method and Tolerance on Impact Test Results of UHS Steels. International Journal of key Engineering Materials Vol. 473, Trans Tech Publications, ISBN 13 978-3-03785-0831-1
     
  2. Keskitalo M, Mäntyjärvi J & Kiuru T
    The low cycle fatigue strength of laser welded Ultra high strength steel. International Journal of Key Engineering Materials Vol. 473, Trans Tech Publications, ISBN 13 978-3-03785-0831-1
     
  3. Lämsä J, Mäntyjärvi K, Järvenpää A, Grüner M, Merklein M & Karjalainen J
    Methods for determination of residual stress of a formed plate using laser ablation. International Journal of Key Engineering Materials Vol. 473, Trans Tech Publications, ISBN 13 978-3-03785-0831-1
     
  4. Määttä A, Mäntyjärvi K & Karjalainen J
    Incremental Bending of Ultra-High-Strength Steels. International Journal of Key Engineering Materials Vol. 473, Trans Tech Publications, ISBN 13 978-3-03785-083-1
     
  5. Rasmus M, Mäntyjärvi K & Karjalainen J
    Small Batch Laser Welding using Light Fasteners and Laser Tack Welding. International Journal of Key Engineering Materials Vol. 473, Trans Tech Publications, ISBN 13 978-3-03785-083-1

 

2009

  1. Keskitalo M & Mäntyjärvi K
    Yb: YAG Disc Laser Welding of Austenitic Stainless Steel Without Filler Material. Key Engineering Materials. (Volumes 410-411), pp 87-96
     
  2. Mäntyjärvi K, Merklein M & Karjalainen J
    UHS Steel Formability in Flexible Roll Forming. Key Engineering Materials (Volumes 410-411), pp 661-668
     
  3. Väisänen A, Mäntyjärvi K & Karjalainen J
    Bendability of Ultra-Strength Steel. Key Engineering Materials (Volumes 410-411), pp 661-620

 

2007

  1. Karjalainen J, Mäntyjärvi K & Juuso M
    Punching Force Reduction With Wave-Formed Tools. International Journal of Key Engineering Materials Vol. 344, Trans Tech Publications, ISBN 0-87849-937-5
     
  2. Mäntyjärvi K, Keskitalo M, Karjalainen J, Heikkala J & Mäkikangas J
    Laser-Assisted Bending. International Journal of Key Engineering Materials Vol. 344, Trans Tech Publications, ISBN 0-87849-937-5

Last updated: 7.5.2018