- Ali Mohammed
Development of Low-Cost CrNiMoWMnV Ultrahigh-Strength Steel with High Impact Toughness for Advanced Engineering Applications. 2020 - Kolli Satish
Sensitization in austenitic stainless steels. Quantitative prediction considering multicomponent thermodynamic and mass balance effects. 2020 - Frondelius Tero
Development of methods in engine design process. 2020 - Saastamoinen Ari
Ultralujien nuorrutusterästen prosessointi ja mikrorakenne. 2020 - Javaheri Vahed
Design, thermomechanical processing and induction hardening of a new medium-carbon steel microalloyed with niobium. 2019 - Järvenpää Antti
Microstructures, mechanical stability and strength of low-temperature reversion-treated AISI 301LN stainless steel under monotonic and dynamic loading. 2019 - Anttila Severi
Influence of minor elements on some weldability issues of intermediate purity stabilized ferritic stainless steels. 2018 - Pallaspuro Sakari
On the factors affecting the ductile-brittle transition in as-quenched fully and partially martensitic low-carbon steels. 2018 - Kaijalainen Antti
Effect of Microstructure on the Mechanical Properties and Bendability of Direct-Quenched Ultrahigh-Strength Steels, 2016 - Kisko Anna
Microstructure and Properties of Reversion Treated Low-Ni High-Mn Austenitic Stainless Steels, 2016 - Mehtonen Saara
The Behavior of Stabilized High-Chromium Ferritic Stainless Steels in Hot Deformation, 2014 - Nousiainen Olli
Characterization of Reliable Second Level Lead-Free BGA Interconnections in Thermomechanically Loaded LTCC/PWB Assemblies, 2010 - Suikkanen Pasi
Development and Processing of Low Carbon Bainitic Steels, 2009 - Hamada Atef
Manufacturing, Mechanical Properties and Corrosion Behaviour of High-Mn TWIP Steels, 2007 - Laitinen Risto
Improvement of Weld HAZ Toughness at Low Heat Input by Controlling the Distribution of M-A Constituents, 2006 - Pan Longxiu
Two Methods for Processing an Ultrafine Ferritic Grain Size in Steels and the Thermal Stability of the Structure, 2004 - Nevasmaa Pekka
Predictive Model for the Prevention of Weld Metal Hydrogen Cracking in High-Strength Multipass Welds, 2003 - Kömi Jukka
Hot ductility of austenitic and duplex stainless steels under hot rolling conditions, 2001 - Perttula Juha
Physical Simulation Studies on Hot Rolling, 1998 - Tian Dewei
Microstructure, Cleavage Fracture and Toughness of Granular bainite in Simulated Coarse-Grained Heat-Affected Zones of Low-Carbon High-Strength Steels, 1998 - Ylitalo Mikko
Untersuchung des Einfluss der Chemischen Zusammensetzung und der Warmbandverformung und der Warmbandglühun auf die Verformbarkeit von Ferritischen Edelstahlen, 1996 - Zhang Hongxue
Structural Characteristics of Pb-(Zr,Ti)O and Pb-(Mg,Nb)-Ti-O films and their dependence on Processing Procedures, 1994 - Leinonen Jouko
Variation in Weld Penetration, 1987 - Kujanpää Veli
Studies on Weld Defects in Austenitic Stainless Steels, 1984 - Suutala Niilo
Solidification Studies on Austenitic Stainless Steels, 1982 - Mielityinen Kirsti
Cr2N Precipitation in Austenitic Stainless Steels, 1979 - Tiitto Seppo
On the Influence of Microstructure on Magnetic Transitions in Steels, 1977 - Moisio Tapani
Solidification Microstructure and Hot Cracking in Austenitic Stainless Steel Weld Metal, 1975 - Karjalainen Pentti
Fatigue Hardening and Fatigue Life of Some F.C.C. Metals and Alloys under Alternating Bending, 1974
Last updated: 31.8.2020