University of Oulu, 2016

Julkaisut

[2018] [2017] [2016] [2015] [2014] [2013] [2012] [2011] [2010] [2009] [2008] [2007]
 
  • Abdollahnejad, Z.; Mastali, M.; Luukkonen, T.; Kinnunen, P.; Illikainen, M. (2018) Fiber-reinforced one-part alkali-activated slag/ceramic binders. - Ceramics international 44 (8), 8963-8976 . https://doi.org/10.1016/j.ceramint.2018.02.097
  • Adesanya, Elijah; Ohenoja, Katja; Luukkonen, Tero; Kinnunen, Päivö; Illikainen, Mirja (2018) One-part geopolymer cement from slag and pretreated paper sludge. - Journal of Cleaner Production 185, 168-175 . https://doi.org/10.1016/j.jclepro.2018.03.007
  • Adesanya, Elijah; Sreenivasan, Harisankar; Kantola, Anu M.; Telkki, Ville-Veikko; Ohenoja, Katja; Kinnunen, Päivö; Illikainen, Mirja (2018) Ladle slag cement - Characterization of hydration and conversion. - Construction and building materials 193, 128-134 . https://doi.org/10.1016/j.conbuildmat.2018.10.179
  • Apu, Ehsanul Hoque; Akram, Saad Ullah; Rissanen, Jouni; Wan, Hong; Salo, Tuula (2018) Desmoglein 3 - Influence on oral carcinoma cell migration and invasion. - Experimental cell research 370 (2), 353-364 . https://doi.org/10.1016/j.yexcr.2018.06.037
  • Berglund, Linn; Forsberg, Fredrik; Jonoobi, Mehdi; Oksman, Kristiina (2018) Promoted hydrogel formation of lignin-containing arabinoxylan aerogel using cellulose nanofibers as a functional biomaterial. - RSC Advances 8 (67), 38219-38228 . https://doi.org/10.1039/C8RA08166B
  • Doshi, Bhairavi; Repo, Eveliina; Heiskanen, Juha P.; Sirviö, Juho Antti; Sillanpää, Mika (2018) Sodium salt of oleoyl carboxymethyl chitosan : a sustainable adsorbent in the oil spill treatment. - Journal of cleaner production 170, 339-350 . https://doi.org/10.1016/j.jclepro.2017.09.163
  • Falah, Mahroo; Pouya, Kaveh Ranjbar; Tolooiyan, Ali; Mackenzie, Kenneth (2018) Structural behaviour of an Australian silty clay (Coode Island silt) stabilised by treatment with slag lime. - Applied Clay Science 157, 198-203 . https://doi.org/10.1016/j.clay.2018.02.045
  • Geng, Shiyu; Wei, Jiayuan; Aitomäki, Yvonne; Noel, Maxime; Oksman, Kristiina (2018) Well-dispersed cellulose nanocrystals in hydrophobic polymers by in situ polymerization for synthesizing highly reinforced bio-nanocomposites. - Nanoscale 10 (25), 11797-11807 . https://doi.org/10.1039/C7NR09080C
  • Geng, Shiyu; Yao, Kun; Zhou, Qi; Oksman, Kristiina (2018) High-Strength, High-Toughness Aligned Polymer-Based Nanocomposite Reinforced with Ultralow Weight Fraction of Functionalized Nanocellulose. - Biomacromolecules 19 (10), 4075-4083 . https://doi.org/10.1021/acs.biomac.8b01086
  • Hartmann, R.; Kinnunen, P.; Illikainen, M. (2018) Cellulose-mineral interactions based on the DLVO theory and their correlation with flotability. - Minerals Engineering 122, 44-52 . https://doi.org/10.1016/j.mineng.2018.03.023
  • Hassan, Mohammad; Berglund, Linn; Hassan, Enas; Abou-Zeid, Ragab; Oksman, Kristiina (2018) Effect of xylanase pretreatment of rice straw unbleached soda and neutral sulfite pulps on isolation of nanofibers and their properties. - Cellulose 25 (5), 2939-2953 . https://doi.org/10.1007/s10570-018-1779-2
  • Hassan, Mohammad; Hassan, Enas; Fadel, Shaimaa M.; Abou-Zeid, Ragab E.; Berglund, Linn; Oksman, Kristiina (2018) Metallo-terpyridine-modified cellulose nanofiber membranes for papermaking wastewater purification. - Journal of inorganic and organometallic polymers and materials 28 (2), 439-447 https://doi.org/10.1007/s10904-017-0685-7
  • Hietala, M.; Oksman, K. (2018) Pelletized cellulose fibres used in twin-screw extrusion for biocomposite manufacturing: Fibre breakage and dispersion. - Composites Part A: Applied Science and Manufacturing 109, 538-545 . https://doi.org/10.1016/j.compositesa.2018.04.006
  • Hietala, M.; Varrio, K.; Berglund, L.; Soini, J.; Oksman, K. (2018) Potential of municipal solid waste paper as raw material for production of cellulose nanofibres. - Waste Management 80, 319-326 . https://doi.org/10.1016/j.wasman.2018.09.033
    Hildebrandt, Nils C.; Piltonen, Petteri; Valkama, Jukka-Pekka; Illikainen, Mirja (2018) The effect of calendering on the mechanical properties of paper-based, self-reinforcing composites. - Cellulose 25 (7), 4001-4010 . https://doi.org/10.1007/s10570-018-1831-2
  • Hujaya, Sry D.; Lorite, Gabriela S.; Vainio, Seppo J.; Liimatainen, Henrikki (2018) Polyion complex hydrogels from chemically modified cellulose nanofibrils: Structure-function relationship and potential for controlled and pH-responsive release of doxorubicin. - Acta biomaterialia 75, 346-357. http://dx.doi.org/10.1016/j.actbio.2018.06.013
  • Jiang, Wen; Tomppo, Laura; Pakarinen, Timo; Sirvio, Juho A.; Liimatainen, Henrikki; Haapala, Antti (2018) Effect of Cellulose Nanofibrils on the Bond Strength of Polyvinyl Acetate and Starch Adhesives for Wood. - BioResources 13 (2), 2283-2292 . http://dx.doi.org/10.15376/biores.13.2.2283-2292
  • Kainulainen, Tuomo P.; Sirviö, Juho A.; Sethi, Jatin; Hukka, Terttu I.; Heiskanen, Juha P. (2018) UV-Blocking Synthetic Biopolymer from Biomass-Based Bifuran Diester and Ethylene Glycol. - Macromolecules 51 (5), 1822-1829 . http://doi.org/10.1021/acs.macromol.7b02457
  • Kalliola, Simo; Repo, Eveliina; Srivastava, Varsha; Zhao, Feiping; Heiskanen, Juha P.; Sirviö, Juho Antti; Liimatainen, Henrikki; Sillanpää, Mika (2018) Carboxymethyl chitosan and its hydrophobically modified derivative as pH-switchable emulsifiers. - Langmuir 34 (8), 2800-2806 . http://dx.doi.org/10.1021/acs.langmuir.7b03959
  • Karinkanta, Pasi; Ämmälä, Ari; Illikainen, Mirja; Niinimäki, Jouko (2018) Fine grinding of wood : overview from wood breakage to applications. - Biomass and bioenergy 113, 31-44 . http://dx.doi.org/10.1016/j.biombioe.2018.03.007
    Keinänen, P.; Siljander, S.; Koivula, M.; Sethi, J.; Sarlin, E.; Vuorinen, J.; Kanerva, M. (2018) Optimized dispersion quality of aqueous carbon nanotube colloids as a function of sonochemical yield and surfactant/CNT ratio. - Heliyon 4 (9), e00787 . https://doi.org/10.1016/j.heliyon.2018.e00787
  • Kinnunen, Päivö; Ismailov, Arnold; Solismaa, Soili; Sreenivasan, Harisankar; Räisänen, Marja-Liisa; Levänen, Erkki; Illikainen, Mirja (2018) Recycling mine tailings in chemically bonded ceramics : a review. - Journal of Cleaner Production 174, 634-649 . https://doi.org/10.1016/j.jclepro.2017.10.280
  • Kiventerä, Jenni; Lancellotti, Isabella; Catauro, Michelina; Dal Poggetto, Francesco; Leonelli, Cristina; Illikainen, Mirja (2018) Alkali activation as new option for gold mine tailings inertization. - Journal of Cleaner Production 187, 76-84 . https://doi.org/10.1016/j.jclepro.2018.03.182
  • Kiventerä, Jenni; Sreenivasan, Harisankar; Cheeseman, Christopher; Kinnunen, Päivö; Illikainen, Mirja (2018) Immobilization of sulfates and heavy metals in gold mine tailings by sodium silicate and hydrated lime. - Journal of Environmental Chemical Engineering 6 (5), 6530-6536 . https://doi.org/10.1016/j.jece.2018.10.012
  • Kotwica, L.; Chorembala, M.; Kapeluszna, E.; Stepien, P.; Deja, J.; Illikainen, M.; Golek, L. (2018) Effect of metakaolinite on properties of alkali activated slag materials. - Key Engineering Materials 761, 69-72 . https://doi.org/10.4028/www.scientific.net/KEM.761.69
    Kotwica, L.; Chorembala, M.; Kapeluszna, E.; Stepien, P.; Deja, J.; Illikainen, M.; Golek, L.  (2018) Influence of calcined mine tailings on the properties of alkali activated slag mortars. - Key Engineering Materials 761, 83-86 . https://doi.org/10.4028/www.scientific.net/KEM.761.83
  • Kotwica, L.; Kapeluszna, E.; Stepien, P.; Deja, J.; Illikainen, M.; Golek, L.  (2018) Influence of Sulphides on Hydration of Ground Granulated Slag Alkali Activated Mortars and Pastes. - Key Engineering Materials 761, 92-95 . https://doi.org/10.4028/www.scientific.net/KEM.761.92
  • Lancellotti, I.; Kiventerä, J.; Catauro, M.; Poggetto, F.D.; Illikainen, M.  (2018) Inertization of Mine Tailing via Cold Consolidation in Geopolymer Matrix. - Key Engineering Materials 761, 31-34 . https://doi.org/10.4028/www.scientific.net/KEM.761.31
  • Li, Panpan; Sirvio, Juho Antti; Asante, Bright; Liimatainen, Henrikki (2018) Recyclable deep eutectic solvent for the production of cationic nanocelluloses. - Carbohydrate polymers 199, 219-227 . https://doi.org/10.1016/j.carbpol.2018.07.024
  • Luukkonen, Tero; Abdollahnejad, Zahra; Yliniemi, Juho; Kinnunen, Päivö; Illikainen, Mirja (2018) Comparison of alkali and silica sources in one-part alkali-activated blast furnace slag mortar. - Journal of Cleaner Production 187, 171-179 . https://doi.org/10.1016/j.jclepro.2018.03.202
  • Luukkonen, Tero; Věžníková, Katerina; Tolonen, Emma-Tuulia; Runtti, Hanna; Yliniemi, Juho; Hu, Tao; Kemppainen, Kimmo; Lassi, Ulla (2018) Removal of ammonium from municipal wastewater with powdered and granulated metakaolin geopolymer. - Environmental technology 39 (4), 414-423 . http://dx.doi.org/10.1080/09593330.2017.1301572
  • Mastali, M.; Dalvand, A.; Sattarifard, A. R.; Abdollahnejad, Z.; Illikainen, M. (2018) Characterization and optimization of hardened properties of self-consolidating concrete incorporating recycled steel, industrial steel, polypropylene and hybrid fibers. - Composites Part B: Engineering 151, 186-200 . https://doi.org/10.1016/j.compositesb.2018.06.021
  • Mastali, M.; Dalvand, A.; Sattarifard, A. R.; Illikainen, M. (2018) Development of eco-efficient and cost-effective reinforced self-consolidation concretes with hybrid industrial/recycled steel fibers. - Construction and building materials 166, 214-226 . https://doi.org/10.1016/j.conbuildmat.2018.01.147
  • Mastali, M.; Dalvand, A.; Sattarifard, A.R.; Abdollahnejad, Z. (2018) Effect of different lengths and dosages of recycled glass fibres on the fresh and hardened properties of SCC. - Magazine of concrete research 70 (22), 1175-1188 . https://doi.org/10.1680/jmacr.17.00180
  • Mastali, M.; Kinnunen, P.; Dalvand, A.; Mohammadi Firouz, R.; Illikainen, M. (2018) Drying shrinkage in alkali-activated binders ? A critical review. - Construction and building materials 190, 533-550 . https://doi.org/10.1016/j.conbuildmat.2018.09.125
  • Mastali, M.; Kinnunen, P.; Isomoisio, H.; Karhu, M.; Illikainen, M. (2018) Mechanical and acoustic properties of fiber-reinforced alkali-activated slag foam concretes containing lightweight structural aggregates. - Construction and building materials 187, 371-381 . https://doi.org/10.1016/j.conbuildmat.2018.07.228
  • Minhaz-Ul Haque, Md; Herrera, Natalia; Geng, Shiyu; Oksman, Kristiina (2018) Melt compounded nanocomposites with semi-interpenetrated network structure based on natural rubber, polyethylene, and carrot nanofibers. - Journal of Applied Polymer Science 135 (10), 45961 . http://doi.org/10.1002/app.45961
  • Nguyen, Hoang; Carvelli, Valter; Adesanya, Elijah; Kinnunen, Päivö; Illikainen, Mirja (2018) High performance cementitious composite from alkali-activated ladle slag reinforced with polypropylene fibers. - Cement and concrete composites 90, 150-160 . https://doi.org/10.1016/j.cemconcomp.2018.03.024
  • Nissilä, Tuukka; Karhula, Sakari S.; Saarakkala, Simo; Oksman, Kristiina (2018) Cellulose nanofiber aerogels impregnated with bio-based epoxy using vacuum infusion : structure, orientation and mechanical properties. - Composites science and technology 155, 64-71 . http://dx.doi.org/10.1016/j.compscitech.2017.12.001
  • Ohenoja, Katja; Körkkö, Mika; Wigren, Valter; Österbacka, Jan; Illikainen, Mirja (2018) Fly ash classification efficiency of electrostatic precipitators in fluidized bed combustion of peat, wood, and forest residues. - Journal of Environmental Management 206, 607-614 . http://doi.org/10.1016/j.jenvman.2017.10.047
  • Ojala, J.; Visanko, M.; Laitinen, O.; Österberg, M.; Sirviö, J.A.; Liimatainen, H. (2018) Emulsion stabilization with functionalized cellulose nanoparticles fabricated using deep eutectic solvents. - Molecules 23 (11), 2765 . https://doi.org/10.3390/molecules23112765
  • Ojala, Jonna; Sirviö, Juho A.; Liimatainen, Henrikki (2018) Preparation of cellulose nanocrystals from lignin-rich reject material for oil emulsification in an aqueous environment. - Cellulose 25 (1), 293-304 . http://dx.doi.org/10.1007/s10570-017-1568-3
  • Rissanen, Jouni; Ohenoja, Katja; Kinnunen, Päivö; Romagnoli, Marcello; Illikainen, Mirja (2018) Milling of peat-wood fly ash : Effect on water demand of mortar and rheology of cement paste. - Construction and building materials 180, 143-153 . https://doi.org/10.1016/j.conbuildmat.2018.05.014
  • Runtti, H.; Tolonen, E.-T.; Tuomikoski, S.; Luukkonen, T.; Lassi, U. (2018) How to tackle the stringent sulfate removal requirements in mine water treatment?A review of potential methods. - Environmental research 167, 207-222 . https://doi.org/10.1016/j.envres.2018.07.018
  • Selkälä, Tuula; Suopajärvi, Terhi; Sirviö, Juho Antti; Luukkonen, Tero; Lorite, Gabriela S.; Kalliola, Simo; Sillanpää, Mika; Liimatainen, Henrikki (2018) Rapid Uptake of Pharmaceutical Salbutamol from Aqueous Solutions with Anionic Cellulose Nanofibrils : The Importance of pH and Colloidal Stability in the Interaction with Ionizable Pollutants. - Chemical engineering journal 350, 378-385 . https://doi.org/10.1016/j.cej.2018.05.163
  • Sethi, Jatin; Farooq, Muhammad; Sain, Sunanda; Sain, Mohini; Sirviö, Juho Antti; Illikainen, Mirja; Oksman, Kristiina (2018) Water resistant nanopapers prepared by lactic acid modified cellulose nanofibers. - Cellulose 25 (1), 259-268 . https://doi.org/10.1007/s10570-017-1540-2
    Sethi, Jatin; Farooq, Muhammad; Österberg, Monika; Illikainen, Mirja; Sirviö, Juho Antti (2018) Stereoselectively water resistant hybrid nanopapers prepared by cellulose nanofibers and water-based polyurethane. - Carbohydrate polymers 199, 286-293 . https://doi.org/10.1016/j.carbpol.2018.07.028
  • Sethi, Jatin; Oksman, Kristiina; Illikainen, Mirja; Sirviö, Juho Antti (2018) Sonication-assisted surface modification method to expedite the water removal from cellulose nanofibers for use in nanopapers and paper making. - Carbohydrate polymers 197, 92-99 . https://doi.org/10.1016/j.carbpol.2018.05.072
  • Singh, Anshu Anjali; Geng, Shiyu; Herrera, Natalia; Oksman, Kristiina (2018) Aligned plasticized polylactic acid cellulose nanocomposite tapes: Effect of drawing conditions. - Composites Part A: Applied Science and Manufacturing 104, 101-107 . https://doi.org/10.1016/j.compositesa.2017.10.019
  • Singh, Anshu Anjali; Wei, Jiayuan; Herrera, Natalia; Geng, Shiyu; Oksman, Kristiina (2018) Synergistic effect of chitin nanocrystals and orientations induced by solid-state drawing on PLA-based nanocomposite tapes. - Composites science and technology 162, 140-145 . https://doi.org/10.1016/j.compscitech.2018.04.034
  • Sirviö, Juho Antti (2018) Cationization of lignocellulosic fibers with betaine in deep eutectic solvent: facile route to charge stabilized cellulose and wood nanofibers. - Carbohydrate polymers 198, 34?40 . https://doi.org/10.1016/j.carbpol.2018.06.051
    Sirviö, Juho Antti; Visanko, Miikka; Ukkola, Jonne; Liimatainen, Henrikki (2018) Effect of plasticizers on the mechanical and thermomechanical properties of cellulose-based biocomposite films. - Industrial crops and products 122, 513-521 . https://doi.org/10.1016/j.indcrop.2018.06.039
  • Solismaa, Soili; Ismailov, Arnold; Karhu, Marjaana; Sreenivasan, Harisankar; Lehtonen, Marja; Kinnunen, Päivö; Illikainen, Mirja; Räisänen, Marja Liisa (2018) Valorization of Finnish mining tailings for use in the ceramics industry. - Bulletin of the Geological Society of Finland 90 (1), 33-54, 1 . http://dx.doi.org/10.17741/bgsf/90.1.002
  • Sowpati, A. K.; Nelo, M.; Varghese, J.; Liimatainen, H.; Visanko, M.; Sebastian, M. T.; Jantunen, H. (2018) Approach to Fabricate Rigid Substrate for 2.4 GHz Inverted-F Antenna Using a Room Temperature Curable Dielectric Ink on Photo and Nanopaper. - Journal of Electronic Materials 47 (7), 3957-3962 . https://doi.org/10.1007/s11664-018-6278-6
  • Tanpichai, Supachok; Oksman, Kristiina (2018) Crosslinked poly(vinyl alcohol) composite films with cellulose nanocrystals: Mechanical and thermal properties. - Journal of Applied Polymer Science 135 (3), 45710 . http://doi.org/10.1002/app.45710
  • Tervahartiala, Tero; Hildebrandt, Nils C.; Piltonen, Petteri; Schabel, Samuel; Valkama, Jukka-Pekka (2018) Potential of all-cellulose composites in corrugated board applications : Comparison of chemical pulp raw materials. - Packaging technology and science 31 (4), 173-183 . https://doi.org/10.1002/pts.2365
  • Wei, Zengxi; Wang, Lei; Zhuo, Ming; Ni, Wei; Wang, Hongxia; Ma, Jianmin (2018) Layered tin sulfide and selenide anode materials for Li- and Na-ion batteries. - Journal of Materials Chemistry A 6 (26), 12185-12214 . https://doi.org/10.1039/c8ta02695e
  • Väätäjä, Maria; Kähäri, Hanna; Ohenoja, Katja; Sobocinski, Maciej; Juuti, Jari; Jantunen, Heli (2018) 3D printed dielectric ceramic without a sintering stage. - Scientific Reports 8, 1-8, 15955 . https://doi.org/10.1038/s41598-018-34408-5
  • Yliniemi, J.; Laitinen, O.; Kinnunen, P.; Illikainen, M. (2018) Pulverization of fibrous mineral wool waste. - Journal of material cycles and waste management 20 (2), 1248-1256 . https://doi.org/10.1007/s10163-017-0692-3
  • Zhang, Kaitao; Liimatainen, Henrikki (2018) Hierarchical Assembly of Nanocellulose?Based Filaments by Interfacial Complexation. - Small 14 (38), 1801937 . https://doi.org/10.1002/smll.201801937
  • Zhang, Kaitao; Shen, Minggui; Liu, He; Shang, Shibin; Wang, Dan; Liimatainen, Henrikki (2018) Facile synthesis of palladium and gold nanoparticles by using dialdehyde nanocellulose as template and reducing agent. - Carbohydrate polymers 186, 132-139 . https://doi.org/10.1016/j.carbpol.2018.01.048
  • Ämmälä, Ari; Pääkkönen, Tiina M.; Illikainen, Mirja (2018) Role of screen plate design in the performance of a rotor impact mill in fine grinding of biomass. - Industrial crops and products 122, 384-391 . https://doi.org/10.1016/j.indcrop.2018.06.021
 
  • Adesanya, Elijah; Ohenoja, Katja; Kinnunen, Päivö; Illikainen, Mirja (2017) Alkali activation of ladle slag from steel-making process. - Journal of Sustainable Metallurgy 3 (2), 300-310. http://dx.doi.org/10.1007/s40831-016-0089-x 
  • Adesanya, Elijah; Ohenoja, Katja; Kinnunen, Päivö; Illikainen, Mirja (2017) Properties and durability of alkali-activated ladle slag. - Materials and Structures 51(50), 255. https://doi.org/10.1617/s11527-017-1125-4
  • Berglund, Linn; Anugwom, Ikenna; Hedenström, Mattias; Aitomäki, Yvonne; Mikkola, Jyri-Pekka; Oksman, Kristiina (2017) Switchable ionic liquids enable efficient nanofibrillation of wood pulp. - Cellulose 24 (8), 3265-3279 . http://dx.doi.org/10.1007/s10570-017-1354-2
  • Doshi, Bhairavi; Repo, Eveliina; Heiskanen, Juha P.; Sirviö, Juho Antti; Sillanpää, Mika (2017) Effectiveness of N,O-carboxymethyl chitosan on destabilization of Marine Diesel, Diesel and Marine-2T oil for oil spill treatment. - Carbohydrate polymers 167, 326-336. http://dx.doi.org/10.1016/j.carbpol.2017.03.064
  • Geng, Shiyu; Shah, Faiz Ullah; Liu, Peng; Antzutkin, Oleg N.; Oksman, Kristiina (2017) Plasticizing and crosslinking effects of borate additives on the structure and properties of poly(vinyl acetate). - RSC Advances 7 (13), 7483-7491. http://dx.doi.org/10.1039/c6ra28574k
  • Hartmann, R.; Rudolph, M.; Ämmälä, A.; Illikainen, M. (2017) The action of cellulose-based and conventional flotation reagents under dry and wet conditions correlating inverse gas chromatography to microflotation studies. - Minerals Engineering 114, 17-25. https://doi.org/10.1016/j.mineng.2017.09.004
  • Herrera, Martha A.; Mathew, Aji P.; Oksman, Kristiina (2017) Barrier and mechanical properties of plasticized and cross-linked nanocellulose coatings for paper packaging applications. - Cellulose 24 (9), 3969-3980. http://doi.org/10.1007/s10570-017-1405-8
  • Herrera, Natalia; Singh, Anshu Anjali; Salaberria, Asier M.; Labidi, Jalel; Mathew, Aji P.; Oksman, Kristiina (2017) Triethyl Citrate (TEC) as a Dispersing Aid in Polylactic Acid/Chitin Nanocomposites Prepared via Liquid-Assisted Extrusion. - Polymers 9 (9), 406. http://dx.doi.org/10.3390/polym9090406
  • Hietala, Maiju; Sain, Sunanda; Oksman, Kristiina (2017) Highly redispersible sugar beet nanofibers as reinforcement in bionanocomposites. - Cellulose 24 (5), 2177-2189. http://dx.doi.org/10.1007/s10570-017-1245-6
  • Hildebrandt, Nils C.; Piltonen, Petteri; Valkama, Jukka-Pekka; Illikainen, Mirja (2017) Self-reinforcing composites from commercial chemical pulps via partial dissolution with NaOH/urea - Industrial crops and products 109, 79-84 . https://doi.org/10.1016/j.indcrop.2017.08.014
  • Hooshmand, Saleh; Aitomaki, Yvonne; Berglund, Linn; Mathew, Aji P.; Oksman, Kristiina (2017) Enhanced alignment and mechanical properties through the use of hydroxyethyl cellulose in solvent-free native cellulose spun filaments. - Composites science and technology 150, 79-86. https://doi.org/10.1016/j.compscitech.2017.07.011
  • Kalliola, Simo; Repo, Eveliina; Srivastava, Varsha; Heiskanen, Juha P.; Sirviö, Juho Antti; Liimatainen, Henrikki; Sillanpää, Mika (2017) The pH sensitive properties of carboxymethyl chitosan nanoparticles cross-linked with calcium ions. - Colloids and surfaces B: Biointerfaces 153 (may), 229-236. http://dx.doi.org/10.1016/j.colsurfb.2017.02.025
  • Karinkanta, Pasi; Laitinen, Ossi (2017) Use of tube flow fractionation in wood powder characterisation. - Biomass and Bioenergy 99 (4), 122-138. http://dx.doi.org/10.1016/j.biombioe.2017.02.011
  • Kinnunen, Päivö; Yliniemi, Juho; Talling, Bob; Illikainen, Mirja (2017) Rockwool waste in fly ash geopolymer composites. - Journal of material cycles and waste management 19 (3), 1220-1227. http://dx.doi.org/10.1007/s10163-016-0514-z
  • Koivuranta, Elisa; Hietala, Maiju; Ämmälä, Ari; Oksman, Kristiina; Illikainen, Mirja (2017) Improved durability of lignocellulose-polypropylene composites manufactured using twin-screw extrusion. - Composites Part A: Applied Science and Manufacturing 101, 265-272. http://dx.doi.org/10.1016/j.compositesa.2017.06.024
  • Koivuranta, Elisa; Suopajärvi, Terhi; Hattuniemi, Joni; Stoor, Tuomas; Illikainen, Mirja (2017) The effect of seasonal variations on floc morphology in the activated sludge process. - Environmental technology 38 (24), 3209-3215. http://dx.doi.org/10.1080/09593330.2017.1291760
  • Kuokkanen, Toivo; Pesonen, Janne; Kaakinen, Juhani; Välimäki, Ilkka; Illikainen, Mirja (2017) Comparison of standard methods for evaluating the metal concentrations in bio ash. - International Journal of Environment and Waste Management 20 (3), 203. https://doi.org/10.1504/IJEWM.2017.087149
  • Laitinen, Ossi; Ojala, Jonna; Sirviö, Juho; Liimatainen, Henrikki (2017) Sustainable stabilization of oil in water emulsions by cellulose nanocrystals synthesized from deep eutectic solvents. - Cellulose 24 (4), 1679-1689. http://dx.doi.org/10.1007/s10570-017-1226-9
  • Laitinen, Ossi; Suopajärvi, Terhi; Österberg, Monika; Liimatainen, Henrikki (2017) Hydrophobic, Superabsorbing Aerogels from Choline Chloride-Based Deep Eutectic Solvent Pretreated and Silylated Cellulose Nanofibrils for Selective Oil Removal. - ACS applied materials & interfaces 9 (29), 25029-25037. http://dx.doi.org/10.1021/acsami.7b06304
  • Li, Panpan; Sirviö, Juho Antti; Haapala, Antti; Liimatainen, Henrikki (2017) Cellulose Nanofibrils from Nonderivatizing Urea-Based Deep Eutectic Solvent Pretreatments. - ACS applied materials & interfaces 9 (3), 2846-2855. http://dx.doi.org/10.1021/acsami.6b13625
  • Luukkonen, Tero; Abdollahnejad, Zahra; Yliniemi, Juho; Kinnunen, Päivö; Illikainen, Mirja (2017) One-part alkali-activated materials : A review. - Cement and Concrete Research 103, 21-34. http://dx.doi.org/10.1016/j.cemconres.2017.10.001
  • Rissanen, Jouni; Ohenoja, Katja; Kinnunen, Päivö; Illikainen, Mirja (2017) Partial Replacement of Portland-Composite Cement by Fluidized Bed Combustion Fly Ash. - Journal of materials in civil engineering 29 (8), 04017061. http://dx.doi.org/10.1061/(ASCE)MT.1943-5533.0001899
  • Rudolph, Martin; Hartmann, Robert (2017) Specific surface free energy component distributions and flotabilities of mineral microparticles in flotation: an inverse gas chromatography study. - Colloids and Surfaces A: Physicochemical and Engineering Aspects 513, 380-388. http://dx.doi.org/10.1016/j.colsurfa.2016.10.069
  • Sethi, Jatin; Illikainen, Mirja; Sain, Mohini; Oksman, Kristiina (2017) Polylactic acid/polyurethane blend reinforced with cellulose nanocrystals with semi-interpenetrating polymer network (S-IPN) structure. - European Polymer Journal 86, 188-199. http://dx.doi.org/10.1016/j.eurpolymj.2016.11.031
  • Sirviö, J.A.; Visanko, M.; Hildebrandt, N.C. (2017) Rapid preparation of all-cellulose composites by solvent welding based on the use of aqueous solvent. - European Polymer Journal 97, 292-298. https://doi.org/10.1016/j.eurpolymj.2017.10.021
  • Sirviö, Juho Antti; Heiskanen, Juha P. (2017) Synthesis of Alkaline-Soluble Cellulose Methyl Carbamate Using a Reactive Deep Eutectic Solvent. - ChemSusChem 10 (2), 455-460. http://dx.doi.org/10.1002/cssc.201601270
  • Sirviö, Juho Antti; Visanko, Miikka Tuomas (2017) Anionic wood nanofibers produced from unbleached mechanical pulp by highly efficient chemical modification. - Journal of Materials Chemistry A 5 (41), 21828-21835. http://dx.doi.org/10.1039/C7TA05668K
  • Sreenivasan, Harisankar; Kinnunen, Päivö; Heikkinen, Eetu-Pekka; Illikainen, Mirja (2017) Thermally treated phlogopite as magnesium-rich precursor for alkali activation purpose. - Minerals Engineering 113, 47-54. https://doi.org/10.1016/j.mineng.2017.08.003
  • Suopajärvi, Terhi; Sirviö, Juho Antti; Liimatainen, Henrikki (2017) Cationic nanocelluloses in dewatering of municipal activated sludge. - Journal of Environmental Chemical Engineering 5 (1), 86-92
  • Suopajärvi, Terhi; Sirviö, Juho Antti; Liimatainen, Henrikki (2017) Nanofibrillation of deep eutectic solvent-treated paper and board cellulose pulps. - Carbohydrate polymers 169, 167-175. https://doi.org/10.1016/j.carbpol.2017.04.009
  • Tomperi, J.; Koivuranta, E.; Leiviskä, K. (2017) Predicting the effluent quality of an industrial wastewater treatment plant by way of optical monitoring. - Journal of water process engineering 16, 283-289. http://dx.doi.org/10.1016/j.jwpe.2017.02.004
  • Tomperi, Jani; Koivuranta, Elisa; Kuokkanen, Anna; Leiviskä, Kauko (2017) Modelling the effluent quality based on a real-time optical monitoring of the wastewater treatment process. - Environmental technology 38 (1), 1-13. http://dx.doi.org/10.1080/09593330.2016.1181674
  • Upola, Heikki; Ämmälä, Ari; Illikainen, Mirja (2017) Fractional pulping of packaging board in high consistency drum pulping. - Tappi Journal 16 (2), 89-95
  • Visanko, Miikka; Sirviö, Juho Antti; Piltonen, Petteri; Liimatainen, Henrikki; Illikainen, Mirja (2017) Castor oil-based biopolyurethane reinforced with wood microfibers derived from mechanical pulp. - Cellulose 24 (6), 2531-2543. http://dx.doi.org/10.1007/s10570-017-1286-x
  • Visanko, Miikka; Sirviö, Juho Antti; Piltonen, Petteri; Sliz, Rafal; Liimatainen, Henrikki; Illikainen, Mirja (2017) Mechanical fabrication of high-strength and redispersible wood nanofibers from unbleached groundwood pulp. - Cellulose 24 (10), 4173-4187. http://dx.doi.org/10.1007/s10570-017-1406-7
  • Yliniemi, Juho; Paiva, H.; Ferreira, T. M. ; Tiainen, Minna; Illikainen, Mirja (2017) Development and incorporation of lightweight waste-based geopolymer aggregates in mortar and concrete. - Construction and building materials 131, 784-792. http://dx.doi.org/10.1016/j.conbuildmat.2016.11.017
  • Yliniemi, Juho; Pesonen, Janne; Tanskanen, Pekka; Peltosaari, Olli; Tiainen, Minna; Nugteren, Henk; Illikainen, Mirja (2017) Alkali activation-granulation of hazardous fluidized bed combustion fly ashes. - Waste and biomass valorization 8 (2), 339-348. http://dx.doi.org/10.1007/s12649-016-9580-7
 
  • Czajkowski, J.; Kinnunen, P.; Haapanen, K.; Niinimäki, J.; Fabritius, T. (2016) Simultaneous magnetic actuation and observation with ferromagnetic sensors. - Measurement science and technology 27 (2), 025301 . http://dx.doi.org/10.1088/0957-0233/27/2/025301
  • Haapanen, Karoliina; Kinnunen, Päivö; Czajkowski, Jakub; Lahti, Anni; Illikainen, Mirja (2015) Observation of viscoelastic solutions with ferromagnetic stirrers. - Sensors and actuators A: Physical 236, 309-314 . http://dx.doi.org/10.1016/j.sna.2015.11.002
  • Hartmann, Robert; Sirviö, Juho; Sliz, Rafael; Laitinen, Ossi; Liimatainen, Henrikki; Ämmälä, Ari; Fabritius, Tapio; Illikainen, Mirja (2016) Interactions between aminated cellulose nanocrystals and quartz : adsorption and wettability studies. - Colloids and surfaces a: physicochemical and engineering aspects 489, 207-215 . http://dx.doi.org/10.1016/j.colsurfa.2015.10.022
  • Herrera, Martha A.; Sirviö, Juho A.; Mathew, Aji P.; Oksman, Kristiina (2016) Environmental friendly and sustainable gas barrier on porous materials : Nanocellulose coatings prepared using spin- and dip-coating. - Materials & Design 93, 19-25 . http://dx.doi.org/10.1016/j.matdes.2015.12.127
  • Herrera, Natalia; Roch, Hendrik; Salaberria, Asier M.; Pino-Orellana, Maximiliano A.; Labidi, Jalel; Fernandes, Susana C. M.; Radic, Deodato; Leiva, Angel; Oksman, Kristiina (2016) Functionalized blown films of plasticized polylactic acid/chitin nanocomposite : Preparation and characterization. - Materials & Design 92, 846-852 . http://dx.doi.org/10.1016/j.matdes.2015.12.083
  • Herrera, Natalia; Salaberria, Asier M.; Mathew, Aji P.; Oksman, Kristiina (2016) Plasticized polylactic acid nanocomposite films with cellulose and chitin nanocrystals prepared using extrusion and compression molding with two cooling rates: Effects on mechanical, thermal and optical properties. - Composites Part A: Applied Science and Manufacturing 83, 89-97 . http://doi.org/10.1016/j.compositesa.2015.05.024
  • Hietala, Maiju; Ämmälä, Ari; Silvennoinen, Jukka; Liimatainen, Henrikki (2016) Fluting medium strengthened by periodate?chlorite oxidized nanofibrillated celluloses. - Cellulose 23 (1), 427-437 . http://dx.doi.org/10.1007/s10570-015-0801-1
  • Kano, Hiroshi; Iseda, Ayumu; Ohenoja, Katja; Niskanen, Ilpo (2016) Refractive index measurement of nanoparticles by immersion refractometry based on a surface plasmon resonance sensor. - Chemical Physics Letters 654, 72-75 . http://doi.org/10.1016/j.cplett.2016.05.013
  • Kemppainen, Kalle; Suopajärvi, Terhi; Laitinen, Ossi; Ämmälä, Ari; Liimatainen, Henrikki; Illikainen, Mirja (2016) Flocculation of fine hematite and quartz suspensions with anionic cellulose nanofibers. - Chemical engineering science 148, 256-266 . http://dx.doi.org/10.1016/j.ces.2016.04.014
  • Kiventerä, Jenni; Golek, Lukasz; Yliniemi, Juho; Ferreira, Victor; Deja, Jan; Illikainen, Mirja (2016) Utilization of sulphidic tailings from gold mine as a raw material in geopolymerization. - International journal of mineral processing 149, 104-110 . http://dx.doi.org/10.1016/j.minpro.2016.02.012
  • Koivuranta, Elisa; Stoor, Tuomas; Hattuniemi, Joni; Niinimäki, Jouko (2015) On-line optical monitoring of activated sludge floc morphology. - Journal of water process engineering 5, 28-34 . http://dx.doi.org/10.1016/j.jwpe.2014.12.009
  • Laitinen, Ossi; Hartmann, Robert; Sirviö, Juho; Liimatainen, Henrikki; Rudolph, Martin; Ämmälä, Ari; Illikainen, Mirja (2016) Alkyl aminated nanocelluloses in selective flotation of aluminium oxide and quartz. - Chemical engineering science 144, 260-266 . http://dx.doi.org/10.1016/j.ces.2016.01.052
  • Minhaz-Ul Haque, Md; Oksman, Kristiina (2016) Semi-IPN of biopolyurethane, benzyl starch, and cellulose nanofibers: Structure, thermal and mechanical properties. - Journal of Applied Polymer Science 133 (45; SI), 43726 . http://dx.doi.org/10.1002/app.43726
  • Ohenoja, Katja; Tanskanen, Pekka; Peltosaari, Olli; Wigren, Valter; Österbacka, Jan; Illikainen, Mirja (2016) Effect of particle size distribution on the self-hardening property of biomass-peat fly ash from a bubbling fluidized bed combustion. - Fuel processing technology 148, 60-66 . http://dx.doi.org/10.1016/j.fuproc.2016.02.023
  • Ohenoja, Katja; Tanskanen, Pekka; Wigren, Valter; Kinnunen, Päivö; Körkkö, Mika; Peltosaari, Olli; Österbacka, Jan; Illikainen, Mirja (2016) Self-hardening of fly ashes from a bubbling fluidized bed combustion of peat, forest industry residuals, and wastes. - Fuel 165 (1), 440-446 . http://dx.doi.org/10.1016/j.fuel.2015.10.093
  • Ojala, Jonna; Sirviö, Juho Antti; Liimatainen, Henrikki (2016) Nanoparticle emulsifiers based on bifunctionalized cellulose nanocrystals as marine diesel oil-water emulsion stabilizers. - Chemical engineering journal 288, 312-320 . http://dx.doi.org/10.1016/j.cej.2015.10.113
  • Oksman, Kristiina; Aitomäki, Yvonne; Mathew, Aji P.; Siqueira, Gilberto; Zhou, Qi; Butylina, Svetlana; Tanpichai, Supachok; Zhou, Xiaojian; Hooshmand, Saleh (2016) Review of the recent developments in cellulose nanocomposite processing. - Composites Part A: Applied Science and Manufacturing 83, 2-18 . http://doi.org/10.1016/j.compositesa.2015.10.041
  • Pesonen, Janne; Kuokkanen, Ville; Kuokkanen, Toivo; Illikainen, Mirja (2016) Co-granulation of bio-ash with sewage sludge and lime for fertilizer use. - Journal of environmental chemical engineering 4 (4), 4817-4821 . http://dx.doi.org/10.1016/j.jece.2015.12.035
  • Pesonen, Janne; Yliniemi, Juho; Illikainen, Mirja; Kuokkanen, Toivo; Lassi, Ulla (2016) Stabilization/solidification of fly ash from fluidized bed combustion of recovered fuel and biofuel using alkali activation and cement addition. - Journal of Environmental Chemical Engineering 4 (2), 1759-1768 . http://dx.doi.org/10.1016/j.jece.2016.03.005
  • Pesonen, Janne; Yliniemi, Juho; Kuokkanen, Toivo; Ohenoja, Katja; Illikainen, Mirja (2016) Improving the hardening of fly ash from fluidized-bed combustion of peat and wood with the addition of alkaline activator and Portland cement. - Revista romana de materiale-romanian journal of materials 46 (1), 82-88 . http://solacolu.chim.upb.ro/p82-88w.pdf
  • Pihlajaniemi, Ville; Sipponen, Mika Henrikki; Liimatainen, Henrikki; Sirviö, Juho Antti; Nyyssölä, Antti; Laakso, Simo (2016) Weighing the factors behind enzymatic hydrolyzability of pretreated lignocellulose. - Green chemistry 18 (5), 1295-1305 . http://dx.doi.org/10.1039/c5gc01861g
  • Piltonen, Petteri; Hildebrandt, Nils C.; Westerlind, Bo; Valkama, Jukka-Pekka; Tervahartiala, Tero; Illikainen, Mirja (2016) Green and efficient method for preparing all-cellulose composites with NaOH/urea solvent. - Composites science and technology 135, 153-158 . http://dx.doi.org/10.1016/j.compscitech.2016.09.022
  • Selkälä, Tuula; Sirviö, Juho; Lorite, Gabriela; Liimatainen, Henrikki (2016) Anionically Stabilized Cellulose Nanofibrils through Succinylation Pretreatment in Urea?Lithium Chloride Deep Eutectic Solvent. - ChemSusChem 9 (21), 3074?3083 . http://dx.doi.org/10.1002/cssc.201600903
  • Siqueira, Gilberto; Oksman, Kristiina; Tadokoro, Sandra K.; Mathew, Aji P. (2016) Re-dispersible carrot nanofibers with high mechanical properties and reinforcing capacity for use in composite materials. - Composites science and technology 123, 49-56 . http://doi.org/10.1016/j.compscitech.2015.12.001
  • Sirviö, Juho Antti; Hasa, Tapani; Leiviskä, Tiina; Liimatainen, Henrikki; Hormi, Osmo (2016) Bisphosphonate nanocellulose in the removal of vanadium(V) from water. - Cellulose 23 (1), 689-697 . http://dx.doi.org/10.1007/s10570-015-0819-4
  • Sirviö, Juho Antti; Visanko, Miikka; Heiskanen, Juha P.; Liimatainen, Henrikki (2016) UV-absorbing cellulose nanocrystals as functional reinforcing fillers in polymer nanocomposite films. - Journal of Materials Chemistry A 4 (17), 6368-6375 . http://dx.doi.org/10.1039/c6ta00900j
  • Sirviö, Juho Antti; Visanko, Miikka; Liimatainen, Henrikki (2016) Acidic Deep Eutectic Solvents As Hydrolytic Media for Cellulose Nanocrystal Production. - Biomacromolecules 17 (9), 3025-3032 . http://dx.doi.org/10.1021/acs.biomac.6b00910
  • Sirviö, Juho Antti; Visanko, Miikka; Liimatainen, Henrikki (2016) Synthesis of imidazolium-crosslinked chitosan aerogel and its prospect as a dye removing adsorbent. - RSC Advances 6 (61), 56544-56548 . http://dx.doi.org/10.1039/c6ra08301c
  • Sirviö, Juho; Visanko, Miikka; Laitinen, Ossi; Ämmälä, Ari; Liimatainen, Henrikki (2016) Amino-modified cellulose nanocrystals with adjustable hydrophobicity from combined regioselective oxidation and reductive amination. - Carbohydrate polymers 136, 581-587 . http://dx.doi.org/10.1016/j.carbpol.2015.09.089
  • Song, Tao; Tanpichai, Supachok; Oksman, Kristiina (2016) Cross-linked polyvinyl alcohol (PVA) foams reinforced with cellulose nanocrystals (CNCs). - Cellulose 23 (3), 1925-1938 . http://doi.org/10.1007/s10570-016-0925-y
  • Tanpichai, Supachok; Oksman, Kristiina (2016) Cross-linked nanocomposite hydrogels based on cellulose nanocrystals and PVA : mechanical properties and creep recovery. - Composites Part A: Applied Science and Manufacturing 88, 226-233 . https://doi.org/10.1016/j.compositesa.2016.06.002
  • Tomperi, Jani; Koivuranta, Elisa; Kuokkanen, Anna; Juuso, Esko; Leiviskä, Kauko (2016) Real-time optical monitoring of the wastewater treatment process. - Environmental technology 37 (3), 344-351 . http://dx.doi.org/10.1080/09593330.2015.1069898
  • Upola, Heikki; Ämmalä, Ari; Kankaanpää, Veikko; Illikainen, Mirja (2016) Falling impact as an isolated disintegration mechanism in drum pulping for packaging board. - Tappi Journal 15 (1), 33-39 . https://imisrise.tappi.org/TAPPI/Products/16/JAN/16JAN33.aspx
  • Upola, Heikki; Ämmalä, Ari; Kankaanpää, Veikko; Illikainen, Mirja (2016) Press wetting as an enhanced wetting method for baled OCC material. - Tappi Journal 15 (1), 9-16 . http://imisrise.tappi.org/TAPPI/Products/16/JAN/16JAN09.aspx
  • Yliniemi, Juho; Kinnunen, Päivö; Karinkanta, Pasi; Illikainen, Mirja (2016) Utilization of Mineral Wools as Alkali-Activated Material Precursor. - Materials 9 (5), 312 . http://dx.doi.org/10.3390/ma9050312
  • Yliniemi, Juho; Nugteren, Henk; Illikainen, Mirja; Tiainen, Minna; Weststrate, Rick; Niinimäki, Jouko (2016) Lightweight aggregates produced by granulation of peat-wood fly ash with alkali activator. - International journal of mineral processing 149, 42-49 . http://doi.org/10.1016/j.minpro.2016.02.006
  • Yliniemi, Juho; Tiainen, Minna; Illikainen, Mirja (2016) Microstructure and Physical Properties of Lightweight Aggregates Produced by Alkali Activation-High Shear Granulation of FBC Recovered Fuel-Biofuel Fly Ash. - Waste and biomass valorization 7 (5), 1235-1244 . http://link.springer.com/article/10.1007/s12649-016-9509-1/fulltext.html
     
  • Dwivedia AD, Dubeya SB, Sillanpää M, Kwon Y-N., Suopajärvi T, Liimatainen H, Niinimäki J & Lee C (2015) Distinctive green recovery of silver species from modified cellulose: Mechanism and spectroscopic studies, International Journal of Biological Macromolecules 76 (2015) 109-118.
  • Haapala A, Härkönen J, Leviäkangas P, Kess P, Häggman H, Arvola J, Stoor T, Ämmälä A, Karppinen K, Leppilampi M & Niinimäki J (2015) Bioeconomy potential focus on Northern Finland. Int. J. of Sustainable Economy 7(1):66 – 90.
  • Haapanen K, Kinnunen P, Czajkowski J, Lahti A & Illikainen M (2015) Observation of viscoelastic solutions with ferromagnetic stirrers. Sensors and actuators A: Physical 236, 309-314.
  • Kaakinen J, Kuokkanen T, Leskinen H, Välimäki I & Kujala K (2015) The use of a four-stage sequential leaching procedure and the corresponding one-phase extractions for risk assessment of potential harmful substances such as heavy metals in waste rock utilized in railway ballast. Chemical speciation and bioavailability 27 (2), 71-80.
  • Karjalainen M, Ämmälä A, Rousu P & Niinimäki J (2015) Fractionation of epidermal cells from wheat straw pulp by flotation. Tappi Journal 14 (4), 229-235.
  • Kekäläinen K, Liimatainen H, Biale F & Niinimäki J (2015) Nanofibrillation of TEMPO-oxidized bleached hardwood kraft cellulose at high solids content. Holzforschung 69 (9), 1077-1088.
  • Kemppainen K, Upola H & Körkkö M (2015) Ink and dirt behavior in repulping after artificial aging of coldset offset printed newspapers at different temperatures, NPPRJ vol 30, no 3
  • Koivuranta E, Stoor T, Hattuniemi J & Niinimäki (2015) On-line optical monitoring of activated sludge floc morphology. Journal of Water Process Engineering 5(Apr.):28–34.
  • Koivuranta E, Suopajärvi T, Stoor T, Hattuniemi J & Niinimäki J (2015) Use of Optical Monitoring to Assess the Breakage of Activated Sludge Flocs. Particulate science and technology 33 (4), 412-417.
  • Liimatainen H, Sirviö J, Kekäläinen K & Hormi O (2015) High-consistency milling of oxidized cellulose for preparing microfibrillated cellulose films. Cellulose 22 (5), 3151-3160.
  • Ohenoja K & Illikainen M (2015) Effect of operational parameters and stress energies on stirred media milling of talc, Powder Technology 283 (2015) 254-259.
  • Ohenoja K, Tanskanen P, Wigren V, Kinnunen P, Körkkö M, Peltosaari O, Österbacka J & Illikainen M (2016) Self-hardening of fly ashes from a bubbling fluidized bed combustion of peat, forest industry residuals, and wastes. Fuel 165 (1), 440-446.
  • Sirviö J, Honkaniemi S, Visanko M & Liimatainen H (2015) Composite Films of Poly(vinyl alcohol) and Bifunctional Cross-linking Cellulose Nanocrystals. ACS applied materials & interfaces 7 (35), 19691-19699.
  • Sirviö J, Visanko M & Liimatainen H (2015) Deep eutectic solvent system based on choline chloride – urea as a pre-treatment for nanofibrillation of wood cellulose, Green chemistry 17 (6), 3401-3406.
  • Suopajärvi T, Liimatainen H & Niinimäki J (2015) Morphological analyzes of some micro- and nanofibrils from birch and wheat straw sources. Journal of Wood Chemistry and Technology 35 (2), 102-112
  • Suopajärvi T, Liimatainen H, Karjalainen M, Upola H & Niinimäki J (2015) Lead adsorption with sulfonated wheat pulp nanocelluloses. Journal of Water Process Engineering  5, 136-14.
  • Upola H, Laitinen O, Körkkö M & Ämmälä A (2015) Applying image analysis to measure flake content and flake size distribution in pulping of packaging board, NPPRJ vol 30, no 3
  • Visanko M, Liimatainen H, Sirviö J, Mikkonen K, Sliz R, Tenkanen M, Hormi O & Niinimäki J (2015) Butylamino-functionalized cellulose nanocrystal films: barrier properties and mechanical strength, RCS Advances 5 (20), 15140-15146.
  • Yliniemi J, Pesonen J, Tiainen M & Illikainen M (2015) Alkali activation of recovered fuel-biofuel fly ash from fluidised-bed combustion: Stabilization/solidification of heavy metals, Waste Management 43, 273-282
  • Ämmälä A, Jokinen H, Niinimäki J & Illikainen M (2015) Effect of design and operational parameters to the machine screen pulsation and energy consumption, Nordic pulp & paper research journal 30 (2), 215-219.
  • Ämmälä A, Jokinen H, Niinimäki J, Illikainen M (2015) Role of foil pulsation in the capacity of a machine screen, Nordic pulp & paper research journal 30 (2), 220-224.
 
  • Hietala M & Oksman K (2014) Technologies for separation of cellulose nanofibers. in Handbook of green materials. vol. 1. Bionanomaterials : separation processes, characterization and properties. eds. Oksmann, Kristina; Mathew, Aji P.; Bismarck, Alexander; Rojas, Orlando J.; Sain, Mohini. World Scientific series in materials and energy. p. Singapore. 53-71.
  • Hietala M, Rollo P, Kekäläinen K & Oksman K (2014) Extrusion processing of green biocomposites: compounding, fibrillation efficiency, and fiber dispersion. Journal of Applied Polymer Science 131(6):39981
  • Hokkanen S, Repo E, Suopajärvi T, Liimatainen H, Niinimäki J & Sillanpää M (2014) Adsorption of Ni(II), Cu(II) and Cd(II) from aqueous solutions by amino modified nanostructured microfibrillated cellulose. Cellulose (21):1471–1487.
  • Illikainen,M, Kerätär K, Lassi U & Miettinen A (2014) Materiaalitehokkuus fokuksessa Oulun yliopistossa. Ympäristö ja Terveys (7):42-45.
  • Illikainen M, Tanskanen P, Kinnunen P, Körkkö M, Peltosaari O, Wigren V, Österbacka J, Talling B & Niinimäki J (2014) Reactivity and self-hardening of fly ash from fluidized bed combustion of wood and peat. Fuel 135(1):69-75.
  • Kangas H, Laitinen O, Niinimäki J &, Pitkänen M (2014) Amount, characteristics and toxicity of nano-scale material in fibrillated celluloses - Methods and properties of size-fractionated samples. (Abstrakti). 7th Tappi International Conference on Nanotechnology for Renewable Materials, 24 - 27 Jun. 2013, Stockholm, Sweden. Tappi. Tappi international conference on nanotechnology of renewable materials.
  • Kaakinen J, Kuokkanen T,  Pesonen J ; Välimäki I (2014) 'Comparison of different standard methods to evaluate the total concentrations of heavy metals in waste rock. Soil and Sediment Contamination 23(4) 437-451.
  • Kangas H, Lahtinen P, Sneck A, Saariaho A-M, Laitinen O & Hellen E (2014) Characterization of fibrillated celluloses. A short review and evaluation of characteristics with a combination of methods. Nordic Pulp and Paper Research Journal 29(1):129-143.
  • Karinkanta P, Illikainen M & Niinimäki J (2014) Effect of different impact events in fine grinding mills on the development of the physical properties of dried Norway spruce (Picea abies) wood in pulverization. Powder Technology (253):352-359.
  • Karinkanta P, Illikainen M & Niinimäki J (2014) Effect of mild torrefaction on pulverization of Norway spruce (Picea abies) by oscillatory ball milling: particle morphology and cellulose crystallinity. Holzforschung 68(3):337-343.
  • Kekäläinen K, Liimatainen H, Illikainen M, Maloney T & Niinimäki J (2014) The role of hornification in the disintegration behaviour of TEMPO-oxidized bleached hardwood fibres in a high-shear homogenizer. Cellulose 21(3):1163-1174.
  • Kekäläinen K, Liimatainen H & Niinimäki J (2014) Disintegration of periodate-chlorite oxidized hardwood pulp fibres into cellulose microfibrils - Kinetics and charge threshold of disintegration. Cellulose 21(5):3691-3700.
  • Kinnunen P, Carey M E, Craig E, Brahmasandra S & McNaughton B (2014) Rapid bacterial growth and antimicrobial response using self-assembled magnetic bead sensors, Sensors and Actuators B: Chemical,  Vol. 190, January 2014, pp. 265-269.
  • Koivuranta E, Keskitalo J, Stoor T, Hattuniemi J, Sarén M & Niinimäki J (2014) A comparison between floc morphology and the effluent clarity at a full-scale activated sludge plant using optical monitoring. Environmental Technology 35(13-16):1605-1610.
  • Kotanen L, Körkkö M, Ämmälä & Niinimäki J (2014) Resource efficiency in deinked pulp production – a review. - Tappi Journal 13 (11):37-43
  • Körkkö M, Haapala A, Ämmälä A, Liimatainen H & Niinimäki J (2014) Effect of wavelength selection on determination of ink content and ink elimination at 700 or 950 nm. Tappi Journal 13(1):45-52.
  • Körkkö M, Kotanen L, Rislakki M, Voss D, Wäsche E, Haarla J & Niinimäki J (2014) ZRI Concept for Recovering Fibers from Fine Screen Rejects – A Mill Trial. Proc. Tappi Peers.
  • Laitinen O & Niinimäki J (2014) Fractional Study of the Microfibrillated Cellulose. Tappi Journal 13(7):49-55.
  • Laitinen O, Joensuu I, Niskanen T & Niinimäki J (2014) Analysis of the external fibrillation. Int. Papwirtsch. (10):46-52.
  • Laitinen O, Kemppainen K, Ämmälä A, Sirviö J, Liimatainen H & Niinimäki J (2014) Use of chemically modified nanocelluloses in flotation of hematite and quartz. Industrial & engineering chemistry research 53(52):20092−20098.
  • Liimatainen H, Suopajärvi T, Sirviö JA, Hormi O & Niinimäki J (2014) Fabrication of cationic cellulosic nanofibrils through aqueous quaternization pretreatment and their use in colloid aggregation. Carbohydrate Polymers (103):187-192.
  • Ohenoja K, Breitung-Faes S, Kinnunen P, Illikainen M, Saari J, Kwade A & Niinimäki J (2014) Ultrafine grinding of limestone with sodium polyacrylates for use as an additive in OPC mortar. Chemical Engineering & Technology 37(5):787-794.
  • Ohenoja K, Saari J, Illikainen M, Breitung-Faes S, Kwade A & Niinimäki J (2014) Effect of polydispersity index on the grinding limits of highly concentrated limestone suspensions. Chemical Engineering & Technology 37(5):833-839.
  • Ohenoja K, Saari J, Illikainen M & Niinimäki J (2014) Effect of molecular weight of sodium polyacrylates on the particle size distribution and stability of a TiO2 suspension in aqueous stirred media milling. Powder Technology (262):188-193.
  • Piltonen P, Karinkanta P & Niinimäki J (2014) The effect of styrene-butadiene latex carboxylation on adhesion. International Journal of Adhesion and Adhesives (54):82-85.
  • Pitkänen M, Kangas H, Laitinen O, Sneck A, Lahtinen P, Peresin S & Niinimäki J (2014) Characteristics and safety of nano-sized cellulose fibrils. Cellulose 21(6):3871–3886.
  • Sirviö JA, Anttila A-K, Pirttilä A-M, Liimatainen H, Kilpeläinen I, Niinimäki J & Hormi O (2014) Cationic wood cellulose films with high strength and bacterial anti-adhesive properties. Cellulose 21(5)3573-3583.
  • Sirviö JA, Kolehmainen A, Liimatainen H, Niinimäki J & Hormi O (2014) Biocomposite cellulose-alginate films: Promising packaging materials. Food chemistry (151):343-351. http://dx.doi.org/10.1016/j.foodchem.2013.11.037
  • Sirviö JA, Kolehmainen A, Visanko M, Liimatainen H, Niinimäki J & Hormi O (2014) Strong, Self-Standing Oxygen Barrier Films from Nanocelluloses Modified with Regioselective Oxidative Treatments. ACS applied materials & interfaces 6(16):14384-14390.
  • Sirviö JA, Liimatainen H, Visanko M & Niinimäki J (2014) Optimization of dicarboxylic acid cellulose synthesis : Reaction stoichiometry and role of hypochlorite scavengers. Carbohydrate polymers (114):73-77
  • Suopajärvi T, Koivuranta E, Liimatainen H & Niinimäki J (2014) Flocculation of municipal wastewaters with anionic nanocelluloses: Influence of nanocellulose characteristics on floc morphology and strength. Journal of Environmental Chemical Engineering (2):2005-2012.
  • Visanko M, Liimatainen H, Sirviö J, Haapala A, Sliz R, Niinimäki J & Hormi O (2014) Porous thin film barrier layers from 2,3-dicarboxylic acid cellulose nanofibrils for membrane structures. Carbohydrate polymers (102):584-589.
  • Visanko M, Liimatainen H, Sirviö J, Heiskanen J, Niinimäki J & Hormi O (2014) Amphiphilic cellulose nanocrystals from acid-free oxidative treatment: physico-chemical characteristics and use as an oil-water stabilizer. Biomacromolecules 15(7):2769-2775.,DOI: 10.1021/bm500628g
 
  • Anttila A-K, Pirttilä AM, Häggman H, Harju A, Venäläinen M, Haapala A, Holmbom B, Julkunen-Tiitto, R (2013) Condensed conifer tannins as antifungal agents in liquid culture. Holzforschung DOI: 10.1515/hf-2012-0154
  • Hietala M, Rollo P, Kekäläinen K & Oksman K (2013) Extrusion processing of green biocomposites: compounding, fibrillation efficiency and fiber dispersion. Journal of Applied Polymer Science DOI: 10.1002/app.39981
  • Haapala A, Laitinen O, Karinkanta P, Liimatainen H, Niinimäki J (2013) Optical characterisation of size, shape and fibrillarity from microfibrillar and microcrystalline cellulose, and fine ground wood powder fractions. Appita Journal, 66(4):331-339.
  • Haapala, Antti; Laitinen, Ossi; Karinkanta, Pasi; Liimatainen, Henrikki; Niinimäki, Jouko (2013) Optical characterization of micro-scale cellulose particles and wood powder. Appita 2013 Annual Conference Proceedings Melbourne, Australia, 8-10 May 2013. p. 70-77.
  • Illikainen M, Kinnunen P, Körkkö M & Niinimäki J (2013) Utilization of fly ash from fluidized bed combustion of biomass as a cement replacement material in mortar. Waste Recycling 17 : 17th Int. Conference on Waste Recyclinge, Kosice, Slovakia, November 21-22, SAS. 7
  • Karinkanta P, Illikainen M & Niinimäki J (2013) Impact-based pulverisation of dried and screened Norway spruce (Picea abies) sawdust in an oscillatory ball mill. Powder Technology 233(1), p. 286-294.
  • Karinkanta P, Illikainen M &Niinimäki J (2013) Effect of grinding conditions in oscillatory ball milling on the morphology of particles and cellulose crystallinity of Norway spruce (Picea abies). Holzforschung 67(3), pp. 277-283.
  • Karjalainen M, Ämmälä A, Rousu P & Niinimäki J (2013) Fractionation of wheat straw pulp cells in a hydrocyclone. Nordic Pulp & Paper Research Journal 28(2) p. 282-289.
  • Karjalainen M, Ämmälä A, Rousu P & Niinimäki J (2013) Fractionation of wheat straw pulp cells in ultra-fine pressure screening. Appita Journal 66(1) pp. 73-80.
  • Kemppainen K, Haapala A, Körkkö M & Niinimäki J (2013)  Ink and dirt behavior in pulping after artificial aging of cold-set offset printed newspapers in different humidity conditions. Resources, Conservation and Recycling, vol. 76 July, p. 41-49.
  • Kinnunen P, McNaughton BH, Niinimäki J (2013) Note: A portable magnetic field for powering nanomotors, microswimmers and sensors, Review of Scientific Instruments 84 086109 http://dx.doi.org/10.1063/1.4817630. 
  • Koivuranta E, Keskitalo J, Haapala A, Stoor T, Sarén M & Niinimäki J (2013) Optical Monitoring of Activated Sludge Flocs in Bulking and Nonbulking Conditions. Environmental Technology 34(5) p. 679-686.
  • Körkkö M, Haapala A, Ämmälä A & Niinimäki J (2013) A review of reflectance-based ink content determination on recycle pulps. Appita J 66(1), p. 47-53.
  • Körkkö M, Kemppainen K, Haapala A, Mäkinen L & Niinimäki J (2013) Test medium for ERIC analysis – the effect of furnish. Proceedings of Tappi Peers, 10th research forum on recycling, September 15-18, Green Bay, USA. p. 2188-2194
  • Laitinen O, Bauer K, Niinimäki J & Peuker U (2013) Validity of Rumpf and Rabinovich roughness adhesion force models with nanoscale rough alumina substrates. Powder Technology 246(2013) p. 545- 552
  • Liimatainen H, Visanko M, Sirviö J, Hormi O & Niinimäki J (2013) Sulfonated cellulose nanofibrils obtained from wood pulp through regioselective oxidative bisulfite pre-treatment, Cellulose 20(2) pp. 741-749.
  • Liimatainen H, Sirviö J, Pajari H, Hormi O & Niinimäki J (2013) Regeneration and Recycling of Aqueous Periodate Solution in Dialdehyde Cellulose Production, Journal of Wood Chemistry and Technology 33(4) pp. 258-266.
  • Liimatainen H, Sirviö J, Visanko M, Suopajärvi T, Ezekiel N, Hormi O & Niinimäki J (2013) Nanofibrillation of cellulose pulp using regioselective periodate pre-treatments. in Production and Applications of Cellulose Nanoparticles. eds. Postek, Michael T.; Moon, Robert J.; Rudie, Alan W; Bilodeau, Michael A.. Nocross, GA, USA, Tappi Press. p. 183-185
  • Mäkinen L, Ämmälä A, Körkkö M & Niinimäki J (2013) The effects of recovering fibre and fine materials on sludge dewatering properties at a deinked pulp mill. Resources, Conservation and Recycling 73(2013) p. 11-16.
  • Mäkinen L, Körkkö M, Haarla J, Ämmälä A, Niinimäki J (2013) Means of improving material efficiency in deinked pulp production. China International Paper Technology Exhibition and Conference 2013, September 24, 2013, Beijing, China. p. 100-109.
  • Mäkinen L, Körkkö M, Ämmälä A, Niinimäki J (2013) Resource efficiency in deinked pulp production - A review. Proceedings of Tappi Peers, 10th research forum on recycling, September 15-18, Green Bay, USA. p. 1789-1796
  • Ohenoja K, Illikainen M, Niinimäki J (2013) Effect of operational parameters and stress energies on the particle size distribution of TiO2 pigment in stirred media milling. Powder Technology 234 (2013), p. 91–96.
  • Ohenoja K, Saari J, Illikainen M, Niinimäki J (2013) Effect of the molecular structure of polymer dispersants on limestone suspension properties in fine grinding. Journal of Chemistry and Chemical Engineering 7(7) pp. 606-612.
  • Piltonen P, Stoor T & Niinimäki J (2013) On-site evaluation method for the nonstick properties of paper machine drying cylinder coating materials—a description of the methodology and two case studies. Measurement 46(3), p. 1061–1064.
  • Piltonen P, Stoor T & Niinimäki J (2013) The effect of rewetting on the adhesion tendency of styrene–butadiene latices on steel surfaces. International Journal of Adhesion and Adhesives Vol 40, 108-111.
  • Rousu P, Karjalainen M, Henricson K, Niinimäki J, Kajanto I & and Backfolk K (2013) Wheat straw pulp fractionation – Part 1. The effect of cells, vessels and fines on paper properties. Cellulose Chemistry and Technology 47(5-6) pp. 443-453.
  • Rousu P, Karjalainen M, Slawecki K, Henricson K, Niinimäki J & and Backfolk K (2013) Wheat straw pulp fractionation – Part 2. The effect of wheat straw fines on z-directional strength of paper, Cellulose Chemistry and Technology 47 (7-8) pp. 613-621.
  • Sirviö J, Kolehmainen A, Liimatainen H, Niinimäki J & Hormi O (2013) Sustainable packaging materials based on wood cellulose. RSC Advances, 3, pp. 16590-16596, DOI: 10.1039/C3RA43264E
  • Suopajärvi T, Liimatainen H, Hormi O & Niinimäki J (2013) Coagulation-flocculation treatment of municipal wastewater based on anionized nanocelluloses. Chemical Engineering Journal vol. 231 Sep., pp. 59-67.
  • Suopajärvi T, Liimatainen H & Niinimäki J (2013) Nanocelluloses in wastewater treatment applications. Proceedings of the 9 th Biennial Johan Gullichsen Colloquium, 14 th Nov. 2013, Espoo, Finland. p. 37-42
  • Ämmälä A, Mäkinen L, Liimatainen H & Niinimäki J (2013) Effect of carboxymethylcellulose and starch on recovery of filler and fines in tertiary flotation. Tappi Journal 12(3) 43-50.
  • Ämmälä A, Liimatainen H, Burmeister C, Niinimäki J (2013) Effect of tempo and periodate-chlorite oxidized nanofibrils on ground calcium carbonate flocculation and retention in sheet forming and on the physical properties of sheets. Cellulose 20(5) pp. 2451-2460.
 
  • Haapala A, Körkkö M, Koivuranta E & Niinimäki J (2012) Optical analysis of ink and other process water contaminants. Tappi Journal 11(7), p. 51-58
  • Haapala A, Körkkö M, Kemppainen K, Stoor T & Niinimäki J (2012) Paper machine white water deaeration and two-stage flotation with channel flow. Tappi Journal 11(7), p. 51-58
  • Karinkanta P, Illikainen M & Niinimäki J (2012) Pulverisation of Norway spuce (Picea abies) sawdust with classifying impact mill. Biomass and Bioenergy 44, 96-106
  • Karjalainen M, Ämmälä A, Rousu P & Niinimäki J (2012) Method for automatic analysis of wheat straw pulp cell types. BioResources 7(1), 827-840.
  • Kekäläinen K, Illikainen M & Niinimäki J (2012) Morphological changes in never-dried kraft fibers under mechanical shearing. Cellulose 19 (3), 879 - 889
  • Kekäläinen K, Illikainen M & Niinimäki J (2012) Gradual disintegration procedure in optimization of chemi-mechanical treatment for micro- and nanocellulose production. International Conference on Nanotechnolofy for Renewable Materials, Montreal, Canada, 4 - 7 June 2012. Tappi. 1-33.
  • Kemppainen K, Körkkö M & Niinimäki J (2012) A novel approach for pulping toner and pigment-based inkjet ink printed papers. Proceedings of 15th PTS-CTP Deinking Symposium. Munich, PTS. 401-410.
  • Körkkö M, Bussini D, Laitinen O, Elegir G & Niinimäki J (2012) True-neutral fractional deinking for flexographic and offset newsprints. Appita J. 65(1), p. 71-77
  • Körkkö M, Ämmälä A & Niinimäki J (2012) Reflectance-based ink content measurement - recent findings on affecting parameters. 66th Appita Annual Conference and Exhibition - Melbourne, Australia 15 - 18 April 2012. Appita. 14-19
  • Körkkö, Mika; Bussini, Daniel; Kemppainen, Kalle; Elegir, Graziano; Niinimäki, Jouko (2012) Fractional pulping using recovered paper mixtures of flexographic and offset printed newspapers with magazines. Proceedings of TAPPI PEERS conference, october 14-18, 2012, Savannah, Georgia. Tappi. TAPPI PEERS. Yhdysvallat, Tappi. 81-86
  • Liimatainen H, Sirviö J, Sundman O, Hormi O & Niinimäki J (2012) Use of nanoparticular and soluble anionic cellulose in coagulation-flocculation treatment of kaolin. Water Research 46(7), p. 2159–2166.
  • Liimatainen H, Visanko M, Sirviö J, Hormi O & Niinimäki J (2012) Enhancement of the nanofibrillation of wood cellulose through sequential periodate-chlorite oxidation. Biomacromolecules 13(5), p. 1592-1597.
  • Mäkinen L, Ämmälä A, Pirkonen P & Niinimäki J (2012) Sludges - Analysis procedure for evaluating the utilisation potential. ipw (1), p. 36-42.
  • Mäkinen L, Körkkö M, Ämmälä A, Haapala A, Suopajärvi T & Niinimäki J (2012) Recovering fibres from fine-pre-screening reject at deinking mills. Tappi Journal 11(11) p. 53-62.
  • Ohenoja K, Saari J, Illikainen M & Niinimäki J (2012) The effect of molecular structure of polymer dispersants on the suspension properties in the fine grinding of limestone. XXVI International Mineral Processing Congress.
  • Piltonen P, Stoor T & Niinimäki J (2012) Adhesion of pressure sensitive adhesives and latex films on cast iron and low-energy surface. International Journal of Adhesion and Adhesives, vol. 36 p. 15-19.
  • Piltonen P & Niinimäki J (2012) Sticking of difficult materials onto paper machine surfaces - Zanieczyszczenie powierzchni elementów maszyny papierniczej substancjami kleistymi. Przeglad Papierniczy 68(10), 607-610.
  • Piltonen, Petteri; Niinimäki, Jouko (2012) Sticking of difficult materials onto paper machine surfaces - From deep understanding of the phenomena to the prevention of problems. Zellcheming 2012, 107th Annual General Meeting and EXPO, Wiesbaden, June 26 - 28, p . 1-6
  • Suopajärvi T, Liimatainen H & Niinimäki J (2012) Fragment analysis of different size-reduced lignocellulosic pulps by hydrodynamic fractionation, Cellulose 19(1), 237-248
 
  • Haapala A, Körkkö M, Koivuranta E & Niinimäki J (2011) Recent Advances in Process Water Optical Analysis. Proceedings of Tappi PEERS 2011, October 2-5, Portland Oregon. 315-323
  • Hietala M, Niinimäki J & Oksman K (2011) The use of twin-screw extrusion in processing of wood: The effect of processing parameters and pretreatment. BioResources 6(4), p. 4615-4625.
  • Hietala M, Samuelsson E, Niinimäki J & Oksman K (2011) The effect of pre-softened wood chips on wood fibre aspect ratio and mechanical properties of wood-polymer composites. Composites Part A: Applied Science and Manufacturing 42 (12), p. 2110-2116.
  • Hietala M, Niinimäki J & Oksman K (2011) Processing of wood chip–plastic composites: effect on wood particle size, microstructure and mechanical properties, Plastics, Rubber and Composites 40(2), p. 49-56.
  • Karinkanta P, Illikainen M & Niinimäki J (2011) The effect of anisotropicity of Norway spruce (Picea abies) during two-body abrasion. Wear 272(1), p. 38-42.
  • Kemppainen K, Laitinen O, Körkkö M, Illikainen M & Niinimäki J (2011) Analysis of prewetting conditions for old magazine papers before pulping in deinking. Tappi Journal 10(6), p. 7-15.
  • Kemppainen K, Körkkö M & Niinimäki J (2011) Fractional pulping of toner and pigment-based inkjet ink printed papers - ink and dirt behavior. BioResources 6(3), p. 2977-2989.
  • Kuokkanen M, Vilppo T, Kuokkanen T, Stoor T & Niinimäki J. (2011) Additives in wood pellet production – a pilot-scale study of binding agent usage, BioResources 6(4), p. 4331-4355.
  • Körkkö M, Haapala A, Mäkinen L, Ämmälä A & Niinimäki J. (2011) Comparison of test medium preparation methods for residual ink analysis. Tappi Journal 10(10), p. 7-14.
  • Körkkö M, Laitinen O, Haapala A, Ämmälä A & Niinimäki J (2011) Scattering properties at the near infrared region and its effect on the determination of residual ink. Tappi Journal 10(6), p. 17-22.
  • Körkkö M., Haapala A, Liimatainen H, Ämmälä A & Niinimäki J (2011) Challenges in residual ink measurement – Effect of fibre fines and fillers. Appita Journal, 64(1), p. 71-75.
  • Körkkö M, Bussini D, Laitinen O, Elegir G & Niinimäki J (2011) True-neutral fractional deinking for flexographic and offset newsprints. 65th Appita Annual Conference, Rotorua, New Zealand, 10-13 April 2011, p. 23-30.
  • Körkkö M, Haapala A, Ämmälä A, Liimatainen H & Niinimäki J (2011) Reflectance based ink content measurements – operational wavelength comparison between 700 nm and 950 nm. Conf. Proc. of TAPPI PEERS, Portland, USA, October 2011.
  • Laitinen O, Kemppainen K, Stoor, T & Niinimäki, J (2011) Fractionation of pulp and paper particles selectively by size. BioResources 6(1), p. 672-685.
  • Laitinen O (2011) Utilisation of tube flow fractionation in fibre and particle analysis. Acta Universitatis Ouluensis Technica C 382, Oulu, Finland: University of Oulu, 2011, 66 pp
  • Liimatainen H, Sirviö J, Sundman O, Visanko M, Hormi O & Niinimäki J (2011) Flocculation performance of a cationic biopolymer derived from a cellulosic source in mild aqueous solution. Bioresource Technology 102(20), p. 9626–9632.
  • Liimatainen H, Sirviö J, Haapala A, Hormi O & Niinimäki J (2011) Characterization of highly accessible microfibers generated by wet stirred media milling. Carbohydrate Polymers 83(4), p. 2005-2010.
  • Mäkinen L, Körkkö M, Haapala A, Suopajärvi T, Ämmälä A & Niinimäki J (2011) New approach to clean and recover fibres from fine screening reject. Conf. Proc. of TAPPI PEERS, Portland, USA, October 2011.
  • Rissanen R, Leinonen A, Haapala A & Kyyrönen P (2011) Comparison of sample pre-treatment methods on flow cytometry measurement of mechanical pulp. Proceedings of Tappi PEERS 2011, October 2-5, Portland Oregon. TAPPI. 141-146
  • Sirviö J, Hyväkkö U, Liimatainen H, Niinimäki J & Hormi O (2011) Periodate oxidation of cellulose at elevated temperatures using metal salts as cellulose activators. Carbohydrate Polymers 83(3), p. 1293-1297.
  • Sirviö J, Honka A, Liimatainen H, Niinimäki J & Hormi O (2011) Synthesis of water-soluble highly cationic cellulose derivative. Carbohydrate Polymers 86(1), p. 266-275.
  • Sirviö J, Liimatainen H, Niinimäki J & Hormi O (2011) Dialdehyde cellulose microfibers generated from wood pulp by milling-induced periodate oxidation. Carbohydrate Polymers 86(1), p. 265-270.
  • Suopajärvi T, Liimatainen H & Niinimäki J (2011) Disintegration tendency of different lignocellulose pulps and fractional analysis of formed microparticles. Cellulose, 19, p. 237–248.
 
  • Haapala A, Honkanen M, Liimatainen H, Stoor T & Niinimäki J (2010) Hydrodynamic drag and rise velocity of microbubbles in papermaking process waters, Chemical Engineering Journal 162(3): 956–964
  • Haapala A, Körkkö M, Kemppainen K, MacNeil D & Niinimäki J (2010)  Purification of white waters by selective flotation, BioResources 5(4): 2153–2172
  • Haapala A, Liimatainen H, Körkkö M, Ekman J & Niinimäki J (2010) Runnability upgrade for a newsprint machine through defect identification and control - a mill case study, 64th Appita Annual Conference, Melbourne, Australia, 18-21 April 2010
  • Haapala A, Liimatainen H, Körkkö M, Ekman J, Salkinoja-Salonen M & Niinimäki J (2010) Web defects in newsprint production – a mill case study, Appita Journal 63(5): 358–363, 398.
  • Haapala A, Körkkö M, Kemppainen K, Stoor T & Niinimäki J (2010) Paper machine white water deaeration and purification in a selective two-stage flotation arrangement, Proceedings of 9th Research Forum on Recycling, Norfolk, USA, 18-21 October 2010
  • Haapala A (2010) Paper machine white water treatment in channel flow. Integration of passive deaeration and selective flotation. Acta Universitatis Ouluensis Technica C 371, Oulu, Finland: University of Oulu, 2010, 96 pp
  • Illikainen M, Härkönen E & Niinimäki J (2010)The Effect Of Acetone Extraction On The Disruptibe Shear Stress In Pine Thermomechanical Pulps. Pulp & Paper Canada, February 2010.
  • Illikainen M, Härkönen E & Niinimäki J (2010)Studies on the mechanisms of TMP refining - Volume fraction of pulp in the inner refining zone. Paperi ja Puu 92(3): 28 - 31.
  • Kekäläinen K, Suopajärvi T, Mathew A, Oksman K, Laitinen O & Niinimäki J (2010) Effect of peroxide treatment on energy consumption of refining and quality. ipw 9, 12 - 17
  • Kekäläinen K, Suopajärvi T, Mathew A, Oksman K, Laitinen O & Niinimäki J (2010) Effect of peroxide treatment on energy consumption of refining and quality of product in microfibrillar cellulose production, Zellcheming, 105th Annual Meeting and EXPO, Wiesbaden, Germany, June 29 – July 1, 2010, 17 pp.
  • Kemppainen K, Körkkö M, Haapala A, Illikainen M & Niinimäki J (2010) Benefits of fractionation during pulping in deinking, Proceedings of 9th Research Forum on Recycling, Norfolk, USA, 18-21 October
  • Kemppainen K, Laitinen O, Körkkö M, Illikainen M & Niinimäki J (2010) Analysis of recycled papers pre-wetting conditions prior to pulping in deinking – ONP furnish, Progress in Paper Recycling, 19(3) 4-16.
  • Körkkö M, Haapala A, Ämmälä A & Niinimäki J (2010) The influence of fines on measured near-infrared scattering and residual ink value, 64th Appita Annual Conference, Melbourne, Australia, 18-21 April 2010
  • Körkkö M, Laitinen O, Kemppainen K, Ämmälä A & Niinimäki J (2010) Effects of Dwell Time and Mixing Intensity After High Consistency Pulping of Recycled Papers on Ink Detachment and Fragmentation, Progress in Paper Recycling 19(1): 3–10
  • Körkkö M, Haapala A, Mäkinen L, Ämmälä A & Niinimäki J (2010) A novel sheet preparation method for ink content measurement in paper recycling, Proceedings of 9th Research Forum on Recycling, Norfolk, USA, 18-21 October 2010
  • Laari A, Haapala A & Turunen I (2010) Gas separation from paper machine white water in open channel flow: Comparison of PIV measurements and CFD simulations, 19th International Congress of Process and Chemical Engineering CHISA 2010 & 7th European Congress of Chemical Engineering ECCE-7, Prague, Czech Republic, 28 August -1 September 2010
  • Liimatainen H, Haapala A, Sirviö J, Hormi O & Niinimäki J (2010) Production of cellulose microparticles from pulp fibres by wet stirred media milling, 64th Appita Annual Conference, Melbourne, Australia, 18-21 April 2010
  • Mäkinen L, Ämmälä A, Vahlroos-Pirneskoski S, Körkkö M, Sarja T & Niinimäki J (2010) Fractionation prior to deinking - a study of optical properties of fractions, ipw no. 4-5, 2010
  • Mäkinen L, Ämmälä A, Pirkonen P & Niinimäki J (2010) Analysis procedure for evaluating the utilisation potential of pulp and paper mill sludges, Zellcheming, 105th Annual Meeting and EXPO, Wiesbaden, Germany, June 29 – July 1, 2010, 13 pp.
  • Suopajärvi T, Mathew A, Kekäläinen K, Grubbström G, Oksman K, Laitinen O & Niinimäki J (2010) Comparison of methods in production of microfibrillar cellulose. ipw 12: 10-13
  • Suopajärvi T, Mathew A, Kekäläinen K, Grubbström G, Oksman K, Laitinen O & Niinimäki J (2010) Comparison of two refining methods in production of microfibrillar cellulose – Kinetics of refining and energy consumption., Zellcheming, 105th Annual Meeting and EXPO, Wiesbaden, Germany, June 29 – July 1, 2010, 20 pp. 

2009

  • Haapala A, Stoor T, Liimatainen H, Nelo M & Niinimäki J (2009) Passive white water deaeration efficiency in open channel flow. Appita Journal. 62(2), p. 105-109.
  • Haapala A, Honkanen M, Liimatainen H, Stoor T & Niinimäki J (2009) Hydrodynamic drag and velocity of micro-bubbles in dilute paper machine suspensions. Proceedings of Computational Methods in Multiphase Flow V, New Forest, UK, June 15-17, 2009. p. 343-354.
  • Haapala A, Körkkö M, Laitinen O & Niinimäki J (2009) Methods for process water ink content analysis. Proceedings of TAPPI Engineering, pulping and environmental conference, Memphis, TN, USA, October 14-16, 2009
  • Kuokkanen M, Kuokkanen T, Stoor T, Niinimäki J & Pohjonen V (2009) Chemical methods in the development of eco-efficient wood-based pellet production and technology. Waste Management & Research 2009: 27(6): 561–571
  • Körkkö M, Laitinen L, Haapala A, Ämmälä A & Niinimäki J (2009) The influence of PCC filler on near-infrared scattering, absorption and residual ink measurement error, Proceedings of Engineering, pulping and environmental conference, Memphis Convention Cook Center, Memphis, TN, USA, October 14-16, 2009
  • Laitinen O, Kemppainen K, Körkkö M, Stoor T & Niinimäki J (2009) The effect of pre-wetting of recycled raw material before pulping in a deinking process. Progress in Paper Recycling, vol. 18, no. 4, Nov. 2009, p. 24-32
  • Larkomaa J, Niinimäki J, Honkanen M, Hanif M & Saarenrinne P (2009) Effect of Fibre Properties on Flocculation and Fractionation of Cellulosic Fibres in Dry State. Journal of Engineered Fibers and Fabrics 4(4): 1-10
  • Liimatainen H, Haavisto S, Haapala A & Niinimäki J (2009) Influence of adsorbed and soluble carboxymethyl cellulose on fibre suspension dispersing, dewaterability and fines retention. BioResources, 4(1), p. 321-340.
  • Liimatainen H, Haapala A, Tomperi J & Niinimäki J (2009) Fibre floc morphology and dewaterability of a pulp suspension: role of flocculation kinetics and characteristics of flocculation agents. Bioresources 4(2): 640−658.
  • Liimatainen H, Haapala A & Niinimäki J (2009) Retention of PCC and GCC fillers on chemical pulp fines surfaces. Tappi Journal September 2009, 38-42.
  • Liimatainen H  (2009) Interactions between fibres, fines and fillers in papermaking. Influence on dewatering and retention of pulp suspensions. Acta Universitatis Ouluensis Technica C 334, Oulu, Finland: University of Oulu, 2009, 74 pp
  • Mäkinen L, Ämmälä A, Vahlroos-Pirneskoski S, Körkkö M, Sarja T & Niinimäki J (2009) Fractionation prior to deinking – A study of optical properties of fractions. Zellcheming, 104rd Annual Meeting and EXPO, Wiesbaden, Germany, June 23-25, 2009, 17 pp.
  • Suopajärvi T, Kekäläinen K, Illikainen M and Niinimäki J (2009) Effect of high intensity treatment on mechanical properties of low consistency pulp. Proceedings of TAPPI Engineering, Pulping and Environmental Conference, Memphis, TN, USA, October 14-16, 2009 
 
  • Haapala A, Stoor T, Liimatainen H, Nelo M & Niinimäki J (2008) Passive white water deaeration efficiency in open channel flow. 62nd Appita Annual Conference, Rotorua, New-Zealand, 21-24 April 2008
  • Haapala A, Liimatainen H, Stoor T & Niinimäki J (2008) Local Air Content and Deaeration Efficiency in Open Channel Flow. ICPPB Nanjing, China, November 4-6, 2008. p. 763-768.
  • Illikainen M (2008) Mechanisms of thermomechanical pulp refining. Acta Universitatis Ouluensis Technica C 305, Oulu, Finland: University of Oulu, 2008, 104 pp.
  • Illikainen M, Härkönen E, Ullmar M & Niinimäki J (2008) Disruptive shear stress of spruce and pine TMP pulps.  Paperi ja Puu 90(2008)1: 47 – 52.
  • Koski A (2008) Applicability of crude tall oil for wood protection. Acta Universitatis Ouluensis, Technica C 293, Oulu, Finland: University of Oulu, 2007, 104 pp
  • Körkkö M, Laitinen O, Vahlroos S, Ämmälä A & Niinimäki J (2008) Effects of mineral fillers and pigments on residual ink measurement. 13th PTS-CTP – Deinking Symposium, Leipzig, 15 – 17 April 2008. Paper 8, p.1-10.
  • Körkkö M, Laitinen O, Saari J, Ämmälä A & Niinimäki J (2008) Recyclability of Release Paper. 103th ZELLCHEMING-Hauptversammlung, Wiesbaden, Germany, 24 – 26 June 2008.
  • Körkkö M, Laitinen O, Ämmälä A, Niinimäki J & Saari J (2008) Recyclability of Release Paper, ipw 9/2008 pp. 54-58.
  • Körkkö M, Laitinen O, Vahlroos S, Ämmälä A & Niinimäki J (2008) Components Removal in Flotation Deinking. Progress in Paper Recycling 17(4), p. 15-22.
  • Laitinen O, Körkkö M & Niinimäki J (2008) The effects of aging in different raw material furnishes. Progress In Paper Recycling, vol. 18, no. 1, November 2008, p. 9-15.
  • Liimatainen H, Taipale T, Haapala A & Niinimäki J (2008) Influence of mechanical pulp fines on clay retention. Tappi Journal Vol 7 No 12, p. 10-16.
  • Liimatainen H, Haapala A & Niinimäki J (2008)  Retention of Calcium Carbonate Fillers on Fines Surfaces. Conf. Proc. of ICPPB Nanjing, China, November 4-6, 2008. p. 513-518.
  • Liimatainen, H, Viitanen, A K, Haapala, A & Niinimäki J (2008) Application of analytical centrifugation for studying pulp dewatering and fibre interactions. 10th World Filtration Congress, April 14-18, Leipzig, p. 61-65.
  • Saarela J, Heikkinen S, Fabritius T, Haapala A & Myllylä R (2008) Refractive index matching improves optical object detection in paper. Measurement Science and Technology Journal 19(5)
  • Stoor T (2008) Air in pulp and papermaking processes. 62nd Appita Annual Conference,  Rotorua, New-Zealand, 21-24 April 2008
  • Vahlroos-Pirneskoski S, Körkkö M, Rosencrance S & Niinimäki J (2008) Post-bleaching response of pulps deinked using an alkaline fatty acid soap or reduced alkaline surfactant blend chemistry. Progress In Paper Recycling, vol. 17, no. 3, May 2008, pp 17-21. 
 
  • Haapala A, Stoor T & Niinimäki J  (2007) Air in papermaking process. Association of Chemical Pulp and Paper Chemists and Engineers in Germany (Zellcheming) 102nd Annual Meeting. Wiesbaden, Germany, 25-28 June 2007
  • Illikainen M, Härkönen E & Niinimäki J (2007) Power consumption distribution in a TMP refiner - comparison of standard and unidirectional refiner segments. International Mechanical Pulping Conference, 6 - 9 May 2007. Minneapolis, Minnesota, USA.
  • Illikainen M, Härkönen E & Niinimäki J (2007) The effect of extractives on disruptive shear stress in pine TMP pulps. International Mechanical Pulping Conference, 6 - 9 May 2007. Minneapolis, Minnesota, USA.
  • Illikainen M, Härkönen E, Ullmar M & Niinimäki J (2007) Power consumption distribution in a TMP refiner: comparison of the first and second stages. Tappi J. 6(9):18-23.
  • Illikainen M & Niinimäki J (2007) Energy dissipation in a TMP refiner disc gap. The 6th Biennial Johan Gullichsen Colloquium. 15 November 2007, Espoo, Finland
  • Jokinen H, Karjalainen M, Niinimäki J & Ämmälä A (2007) Effect of furnish quality on pressure screen performance. Appita Journal 60(1):35-40.
  • Jokinen H, Stoor T, Ämmälä A, Yli-Viitala P & Niinimäki J (2007) Removal of air using a cleaner. Appita Journal 60(6):455-459
  • Jokinen H, Ämmälä A, Virtanen JA, Niinimäki J (2007) Pressure screen capacity – Current findings on the role of wire width and height. Tappi Journal 6(1):3-10
  • Jokinen H (2007) Screening and cleaning of pulp: a study to the parameters affecting separation. Acta Universitatis Ouluensis, Technica C 274, Oulu, Finland: University of Oulu, 2007, 137pp
  • Körkkö M, Laitinen O, Vahlroos S, Ämmälä A & Niinimäki J (2007) Components Removal in flotation deinking. 8th Research Forum on Recycling, Tappi 2007, Niagara Falls, Canada, 23 – 26 September 2007
  • Laari A, Haapala A, Stoor T & Turunen I (2007) Simulation of entrained air separation from paper machine circulation water using CFD. Proceedings of European Congress of Chemical Engineering (ECCE-6), Copenhagen 16–20, September 2007
  • Laitinen O, Körkkö M, Ämmälä A, Saren M & Niinimäki J (2007) Analysis of pulp component in a DIP process with tube flow fractionation. 8th Research Forum on Recycling, Tappi 2007, Niagara Falls, Canada, 23 – 26 September 2007
  • Liimatainen H, Kokko S, Haavisto S, Myllys M & Niinimäki J (2007) Fiber filters in water treatment-effect of fiber length and layering. Filtech Conference 2007, Wiesbaden, Germany, February 27-March 1 2007, pp. 372-380
  • Niinimäki J, Ämmälä A & Jokinen H (2007) Fractionation of fibres – possibilities and limits. PulPaper Conference, Helsinki, Finland, June 5-7th, 2007.
  • Rousu P & Niinimäki J (2007) Nonwood pulp constituents Part I – The effect on pulp and paper properties. Appita Journal 60(3), p. 217-221.
  • Rousu P & Niinimäki J (2007) Nonwood pulp constituents Part II – Combined use of Bauer McNett apparatus and optical analyzer. Appita Journal 60(3), p. 222-227.
  • Sarja T (2007) Measurement, nature and removal of stickies in deinked pulp. Acta Universitatis Ouluensis, Technica C 275, Oulu, Finland: University of Oulu, 2007, 133pp.
  • Sarja T, MacNeil D, Huber P & Niinimäki J (2007) Removal of stickies in flotation. Prog. Pap. Recycling 16(3):5-11.
  • Stoor T, Helle T & Niinimäki J (2007) Dissolution and precipitation of air into various pulp suspensions and white waters. Appita Journal 60(6):460-464.
  • Tiikkaja E (2007) Konenäköä soveltavan kuituanalysaattorin ja virtauskenttäfraktionaattorin mittausten yhteydet kuumahierteen paperiteknisiin ominaisuuksiin. Application of an optical fibre analyser and a tube flow fractionator to the estimation of quality potential of TMP (in Finnish) Acta Universitatis Ouluensis, Technica C 285, Oulu, Finland: University of Oulu, 2007, 139pp.
  • Vahlroos S, Körkkö M, Rosencrance S & Niinimäki J (2007) Comparsion of DIP Bleachability between Traditional Soap and Reduced Alkaline Chemistries. 8th Research Forum on Recycling, Tappi 2007, Niagara Falls, Canada, 23 – 26 September 2007
  • Yli-Viitala P, Jokinen H, Ämmälä A & Niinimäki J (2007) Hydrocyclone sand separation. Appita Journal 60(4):291-295

Viimeksi päivitetty: 18.10.2019