University of Oulu, 2016

Publications

[2018] [2017] [2016] [2015] [2014] [2013] [2012] [2011] [2010] [2009] [2008] [2007]

2018

Abdollahnejad Z, Dalvand A, Mastali M, Luukkonen T, Illikainen M (2018) Effects of waste glass and calcium hydroxide on the crystallinity and strength of alkali-activated fly ash mortars. Magazine of Concrete Research. https://doi.org/10.1680/jmacr.18.00300

Abdollahnejad Z, Luukkonen T, Mastali M, Kinnunen P & Illikainen M (2018) Development of one-part alkali activated ceramic/slag binders containing recycled ceramic aggregates. Journal of Materials in Civil Engineering.

Abdollahnejad Z, Mastali M, Luukkonen T, Kinnunen P & Illikainen M (2018) Fiber-reinforced one-part alkali-activated slag/ceramic binders. Ceramics International. https://doi.org/10.1016/j.ceramint.2018.02.097

Adesanya E, Ohenoja K, Luukkonen T, Kinnunen P & Illikainen M (2018) One-Part Geopolymer Cement from Slag and Pretreated Paper Sludge. Journal of Cleaner Production. https://doi.org/10.1016/j.jclepro.2018.03.007Carvelli, Nguyen, Fujii& Okubo. Monograph chapter: Energy efficient sustainable building materials and products.

Doshi B, Repo E, Heiskanen JP, Sirviö J & Sillanpää M (2018) Sodium salt of oleoyl carboxymethyl chitosan: A sustainable adsorbent in the oil spill treatment. Journal Cleaner Production. https://doi.org/10.1016/j.jclepro.2017.09.163

Falah M, Ranjbar Pouya K, Tolooiyan A & Mackenzie K (2018) Structural Behaviour of an Australian Silty Clay (Coode Island Silt) Stabilised by Treatment with Slag Lime. Applied Clay Science. https://doi.org/10.1016/j.clay.2018.02.045

Geng S, Yao K, Zhou Q & Oksman K (2018) High-Strength, High-Toughness Aligned Polymer-Based Nanocomposite Reinforced with Ultralow Weight Fraction of Functionalized Nanocellulose. Biomacromolecules. https://doi.org/10.1021/acs.biomac.8b01086

Geng S, Wei J, Aitomäki Y, Noel M & Oksman K (2018) Well-dispersed cellulose nanocrystals in hydrophobic polymers by in situ polymerization for synthesizing highly reinforced bio-nanocomposites. Nanoscale. https://doi.org/10.1039/C7NR09080C

Haque M-U, Herrera N, Geng S & Oksman K (2018) Melt compounded nanocomposites with semi-interpenetrated network structure based on natural rubber, polyethylene, and carrot nanofibers. Journal of Applied Polymer Science. https://doi.org/10.1002/app.45961

Hartmann R, Kinnunen P & Illikainen M (2018) Cellulose-Mineral Interactions based on the DLVO Theory and their Correlation with Flotability. Minerals Engineering. https://doi.org/10.1016/j.mineng.2018.03.023

Hassan M, Berglund L, Hassan E, Abou-Zeid R & Oksman K (2018) Effect of xylanase pre-treatment of rice straw unbleached soda and neutral sulphite pulps on isolation of nanofibers and their properties. Cellulose. https://doi.org/10.1007/s10570-018-1779-2

Hassan M, Hassan E, Fadel SM, Abou-Zeid RE, Berglund L & Oksman K (2018) Metallo-Terpyridine-Modified Cellulose Nanofiber Membranes for Papermaking Wastewater Purification. Journal of Inorganic and Organometallic Polymers and Materials. https://doi.org/10.1007/s10904-017-0685-7

Hietala & Oksman (2018) Pelletized cellulose fibres used in twin-screw extrusion for biocomposite manufacturing: fibre breakage and dispersion. Composites Part A: Applied Science and Manufacturing. https://doi.org/10.1016/j.compositesa.2018.04.006

Hildbrandt N, Piltonen P, Valkama J-P & Illikainen M (2018) The effect of calendering on the mechanical properties of paper-based, self-reinforcing composites. Cellulose. https://doi.org/10.1007/s10570-018-1831-2

Jiang, Tomppo, Pakarinen, Sirviö, Liimatainen & Haapala A (2018) Effect of Cellulose Nanofibrils on the Bond Strength of Polyvinyl Acetate and Starch Adhesives for Wood. Bioresources 13(2), 2283-2292.

Karinkanta P, Ämmälä A, Illikainen M & Niinimäki J (2018) Fine grinding of wood - overview from wood breakage to applications. Biomass and Bioenergy. https://doi.org/10.1016/j.biombioe.2018.03.007

Kinnunen P, Ismailov A, Solismaa S, Sreenivasan H, Räisänen M-L, Levänen E & Illikainen M (2018) Recycling mine tailings in chemically bonded ceramics – A review. Journal of Cleaner Production. https://doi.org/10.1016/j.jclepro.2017.10.280

Kiventerä, Lancellotti, Catauro, Dal Poggetto, Leonelli, Illikainen M (2018) Alkali activation as new option for gold mine tailings inertization. Journal of Cleaner Production. https://doi.org/10.1016/j.jclepro.2018.03.182

Kotwica L, Chorembała M, Kapeluszna E, Stępień P, Deja J, Illikainen M & Gołek L (2018) Effect of Metakaolinite on Properties of Alkali Activated Slag Materials. Non-Traditional Cement and Concrete; Key Engineering Materials. https://doi.org/10.4028/www.scientific.net/KEM.761.69

Kotwica L, Chorembała M, Kapeluszna E, Stępień P, Deja J, Illikainen M & Gołek L (2018) Influence of Calcined Mine Tailings on the Properties of Alkali Activated Slag Mortars. Non-Traditional Cement and Concrete; Key Engineering Materials. https://doi.org/10.4028/www.scientific.net/KEM.761.83

Kotwica L, Kapeluszna E, Stępień P, Deja J, Illikainen M & Gołek L (2018) Influence of Sulphides on Hydration of Ground Granulated Slag Alkali Activated Mortars and Pastes. Non-Traditional Cement and Concrete; Key Engineering Materials. https://doi.org/10.4028/www.scientific.net/KEM.761.92

Lancellotti I, Kiventerä J, Catauro M, dal Poggetto F & Illikainen M (2018) Inertization of Mine Tailing via Cold Consolidation in Geopolymer Matrix. Non-Traditional Cement and Concrete; Key Engineering Materials. https://doi.org/10.4028/www.scientific.net/KEM.761.31

Luukkonen T, Abdollahnejad Z, Yliniemi J, Kinnunen P, Illikainen M (2018) Comparison of alkali and silica sources in one-part alkali-activated blast furnace slag mortar. Journal of Cleaner Production. https://doi.org/10.1016/j.jclepro.2018.03.202

Luukkonen T, Veznikova K, Tolonen E-T, Runtti H, Yliniemi J, Hu T, Kemppainen K & Lassi U (2018) Removal of ammonium from municipal wastewater with powdered and granulated metakaolin geopolymer. Environmental Technology. https://doi.org/10.1080/09593330.2017.1301572

Mastali M, Dalvand A, Sattarifard A.R & Abdollahnejad. Effect of different lengths and dosages of recycled glass fibres on the fresh and hardened properties of SCC. Magazine of Concrete Research. https://doi.org/10.1680/jmacr.17.00180

Mastali M, Dalvand A, Sattarifard A.R & Abdollahnejad Z (2018) Characterization and optimization of hardened properties of self-consolidating concrete incorporating recycled steel, industrial steel, polypropylene and hybrid fibers. Composites Part B: Engineering. https://doi.org/10.1016/j.compositesb.2018.06.021

Mastali M, Dalvand A, Sattarifard A.R & Illikainen M (2018) Development of eco-efficient and cost-effective self-consolidation concretes reinforced with hybrid industrial/recycled steel fiber. Construction and Building Materials. https://doi.org/10.1016/j.conbuildmat.2018.01.147

Mastali M, Kinnunen P, Dalvand A, Mohammadi Firouz R & Illikainen M (2018) Review, modelling, and prediction of the drying shrinkage in alkali-activated binders.

Mastali M, Kinnunen P, Isomoisio H, Karhu M & Illikainen M (2018) Mechanical and acoustic properties of fiber-reinforced alkali-activated slag foam concrete containing lightweight structural aggregates. Construction and Building Materials. https://doi.org/10.1016/j.conbuildmat.2018.07.228

Nguyen H, Kinnunen P, Carvelli V, Mastali M & Illikainen M (2018) Strain hardening polypropylene fiber reinforced composite from hydrated ladle slag and gypsum. Composites Part B: Engineering. https://doi.org/10.1016/j.compositesb.2018.09.056

Nguyen H, Carvelli V, Adesanya E, Kinnunen P & Illikainen M (2018) High performance cementitious composite from alkali-activated ladle slag reinforced with polypropylene fibers. Cement and Concrete Composites. https://doi.org/10.1016/j.cemconcomp.2018.03.024

Nguyen H, Staudacher M, Kinnunen P, Carvelli V & Illikainen M (2018) Multi-Fiber Reinforced Ettringite-Based Composites from Industrial Side Streams. https://doi.org/10.1016/j.jclepro.2018.11.241

Nissilä T, Karhula SS, Saarakkala S & Oksman K (2018) Cellulose nanofiber aerogels impregnated with bio-based epoxy using vacuum infusion: structure, orientation and mechanical properties. Composites Science and Technology. https://doi.org/10.1016/j.compscitech.2017.12.001

Ohenoja K, Körkkö M, Wigren V, Österbacka J & Illikainen M (2018) Fly ash classification efficiency of electrostatic precipitators in fluidized bed combustion of peat, wood, and forest residues. Journal of Environmental Management. https://doi.org/10.1016/j.jenvman.2017.10.047

Ohenoja K, Körkkö M, Wigren V, Österbacka J & Illikainen M (2018) Increasing the utilization potential of fly ashes from FBC of peat, forest residues and wastes using mechanical treatments. International Journal of Environmental Science and Technology.

Ohenoja K, Wigren V, Österbacka J & Illikainen M (2018) Applicability of Fly Ash from Fluidized Bed Combustion of Peat, Wood, or Wastes to Concrete. Waste and biomass valorization.

Ojala J, Sirviö J & Liimatainen H (2018) Preparation of cellulose nanocrystals from lignin-rich reject material for oil emulsification in an aqueous environment. Cellulose. https://doi.org/10.1007/s10570-017-1568-3

Rissanen J, Ohenoja K, Kinnunen P, Romagnoli & Illikainen M (2018) Milling of fluidized bed combustion fly ash: Effect on water demand of mortar and rheology of cement paste. Construction and building materials. https://doi.org/10.1016/j.conbuildmat.2018.05.014

Runtti H, Tolonen ET, Tuomikoski S, Luukkonen T & Lassi U (2018) How to tackle the stringent sulphate removal requirements in mine effluents—A review of potential methods. Environmental Research. https://doi.org/10.1016/j.envres.2018.07.018

Sethi J, Oksman K, Illikainen M & Sirviö JA (2018) Sonication-assisted surface modification method to expedite the water removal from cellulose nanofibers for use in nanopapers and paper making. Carbohydrate Polymers. https://doi.org/10.1016/j.carbpol.2018.05.072

Sethi J, Farooq M, Sain S, Sain M, Sirviö J, Illikainen M & Oksman K (2018) Water resistant nanopapers prepared by lactic acid modified cellulose nanofibers. Cellulose. https://doi.org/10.1007/s10570-017-1540-2

Singh AA, Wei J, Herrera N, Geng S & Oksman K (2018) Synergistic effect of chitin nanocrystals and orientations induced by solid-state drawing on PLA-based nanocomposite tapes. Composites Science and Technology. https://doi.org/10.1016/j.compscitech.2018.04.034

Singh AA, Geng S, Herrera N & Oksman K (2018) Aligned plasticized polylactic acid cellulose nanocomposite tapes: Effect of drawing conditions. Composites Part A: Applied Science and Manufacturing. https://doi.org/10.1016/j.compositesa.2017.10.019

Solismaa S, Ismailov, A, Karhu M, Sreenivasan H, Lehtonen M, Kinnunen P, Illikainen M & Räisänen M-L (2018) Valorization of Finnish mining tailings for use in the ceramics industry. Geological Survey of Finland Bulletin. https://doi.org/10.17741/bgsf/90.1.002

Tanpichai S & Oksman K (2018) Aligned-porous-structured poly(vinyl alcohol) foams with cellulose nanocrystals. AIP Conference Proceedings, 2nd International Conference on Science and Technology of Emerging Materials 2018, STEMa 2018; Pattaya, Chonburi; Thailand; 18 July 2018.

Tanpichai S & Oksman K (2018) Crosslinked poly(vinyl alcohol) composite films with cellulose nanocrystals: Mechanical and thermal properties. Journal of Applied Polymer Science. https://doi.org/10.1002/app.45710

Tervahartiala T, Hildebrandt N, Piltonen P, Schabel S & Valkama J-P (2018) Potential of all‐cellulose composites in corrugated board applications: Comparison of chemical pulp raw materials. Packaging Technology and Science. https://doi.org/10.1002/pts.2365

Yliniemi J, Laitinen O, Kinnunen P & Illikainen M (2018) Pulverization of fibrous mineral wool waste. Journal of Material Cycles and Waste Management.

Zhang K, Shen M, Liu H, Shang S, Wang D & Liimatainen H (2018) Facile synthesis of palladium and gold nanoparticles by using dialdehyde nanocellulose as template and reducing agent. Carbohydrate Polymers. https://doi.org/10.1016/j.carbpol.2018.01.048

 

2017

Adesanya, Elijah; Ohenoja, Katja; Kinnunen, Päivö; Illikainen, Mirja (2017) Alkali activation of ladle slag from steel-making process. - Journal of Sustainable Metallurgy 3 (2), 300-310. http://dx.doi.org/10.1007/s40831-016-0089-x 

Adesanya, Elijah; Ohenoja, Katja; Kinnunen, Päivö; Illikainen, Mirja (2017) Properties and durability of alkali-activated ladle slag. - Materials and Structures 51(50), 255. https://doi.org/10.1617/s11527-017-1125-4

Berglund, Linn; Anugwom, Ikenna; Hedenström, Mattias; Aitomäki, Yvonne; Mikkola, Jyri-Pekka; Oksman, Kristiina (2017) Switchable ionic liquids enable efficient nanofibrillation of wood pulp. - Cellulose 24 (8), 3265-3279 . http://dx.doi.org/10.1007/s10570-017-1354-2

Doshi, Bhairavi; Repo, Eveliina; Heiskanen, Juha P.; Sirviö, Juho Antti; Sillanpää, Mika (2017) Effectiveness of N,O-carboxymethyl chitosan on destabilization of Marine Diesel, Diesel and Marine-2T oil for oil spill treatment. - Carbohydrate polymers 167, 326-336. http://dx.doi.org/10.1016/j.carbpol.2017.03.064

Geng, Shiyu; Shah, Faiz Ullah; Liu, Peng; Antzutkin, Oleg N.; Oksman, Kristiina (2017) Plasticizing and crosslinking effects of borate additives on the structure and properties of poly(vinyl acetate). - RSC Advances 7 (13), 7483-7491. http://dx.doi.org/10.1039/c6ra28574k

Hartmann, R.; Rudolph, M.; Ämmälä, A.; Illikainen, M. (2017) The action of cellulose-based and conventional flotation reagents under dry and wet conditions correlating inverse gas chromatography to microflotation studies. - Minerals Engineering 114, 17-25. https://doi.org/10.1016/j.mineng.2017.09.004

Herrera, Martha A.; Mathew, Aji P.; Oksman, Kristiina (2017) Barrier and mechanical properties of plasticized and cross-linked nanocellulose coatings for paper packaging applications. - Cellulose 24 (9), 3969-3980. http://doi.org/10.1007/s10570-017-1405-8

Herrera, Natalia; Singh, Anshu Anjali; Salaberria, Asier M.; Labidi, Jalel; Mathew, Aji P.; Oksman, Kristiina (2017) Triethyl Citrate (TEC) as a Dispersing Aid in Polylactic Acid/Chitin Nanocomposites Prepared via Liquid-Assisted Extrusion. - Polymers 9 (9), 406. http://dx.doi.org/10.3390/polym9090406

Hietala, Maiju; Sain, Sunanda; Oksman, Kristiina (2017) Highly redispersible sugar beet nanofibers as reinforcement in bionanocomposites. - Cellulose 24 (5), 2177-2189. http://dx.doi.org/10.1007/s10570-017-1245-6

Hildebrandt, Nils C.; Piltonen, Petteri; Valkama, Jukka-Pekka; Illikainen, Mirja (2017) Self-reinforcing composites from commercial chemical pulps via partial dissolution with NaOH/urea - Industrial crops and products 109, 79-84 . https://doi.org/10.1016/j.indcrop.2017.08.014

Hooshmand, Saleh; Aitomaki, Yvonne; Berglund, Linn; Mathew, Aji P.; Oksman, Kristiina (2017) Enhanced alignment and mechanical properties through the use of hydroxyethyl cellulose in solvent-free native cellulose spun filaments. - Composites science and technology 150, 79-86. https://doi.org/10.1016/j.compscitech.2017.07.011

Kalliola, Simo; Repo, Eveliina; Srivastava, Varsha; Heiskanen, Juha P.; Sirviö, Juho Antti; Liimatainen, Henrikki; Sillanpää, Mika (2017) The pH sensitive properties of carboxymethyl chitosan nanoparticles cross-linked with calcium ions. - Colloids and surfaces B: Biointerfaces 153 (may), 229-236. http://dx.doi.org/10.1016/j.colsurfb.2017.02.025

Karinkanta, Pasi; Laitinen, Ossi (2017) Use of tube flow fractionation in wood powder characterisation. - Biomass and Bioenergy 99 (4), 122-138. http://dx.doi.org/10.1016/j.biombioe.2017.02.011

Kinnunen, Päivö; Yliniemi, Juho; Talling, Bob; Illikainen, Mirja (2017) Rockwool waste in fly ash geopolymer composites. - Journal of material cycles and waste management 19 (3), 1220-1227. http://dx.doi.org/10.1007/s10163-016-0514-z

Koivuranta, Elisa; Hietala, Maiju; Ämmälä, Ari; Oksman, Kristiina; Illikainen, Mirja (2017) Improved durability of lignocellulose-polypropylene composites manufactured using twin-screw extrusion. - Composites Part A: Applied Science and Manufacturing 101, 265-272. http://dx.doi.org/10.1016/j.compositesa.2017.06.024

Koivuranta, Elisa; Suopajärvi, Terhi; Hattuniemi, Joni; Stoor, Tuomas; Illikainen, Mirja (2017) The effect of seasonal variations on floc morphology in the activated sludge process. - Environmental technology 38 (24), 3209-3215. http://dx.doi.org/10.1080/09593330.2017.1291760

Kuokkanen, Toivo; Pesonen, Janne; Kaakinen, Juhani; Välimäki, Ilkka; Illikainen, Mirja (2017) Comparison of standard methods for evaluating the metal concentrations in bio ash. - International Journal of Environment and Waste Management 20 (3), 203. https://doi.org/10.1504/IJEWM.2017.087149

Laitinen, Ossi; Ojala, Jonna; Sirviö, Juho; Liimatainen, Henrikki (2017) Sustainable stabilization of oil in water emulsions by cellulose nanocrystals synthesized from deep eutectic solvents. - Cellulose 24 (4), 1679-1689. http://dx.doi.org/10.1007/s10570-017-1226-9

Laitinen, Ossi; Suopajärvi, Terhi; Österberg, Monika; Liimatainen, Henrikki (2017) Hydrophobic, Superabsorbing Aerogels from Choline Chloride-Based Deep Eutectic Solvent Pretreated and Silylated Cellulose Nanofibrils for Selective Oil Removal. - ACS applied materials & interfaces 9 (29), 25029-25037. http://dx.doi.org/10.1021/acsami.7b06304

Li, Panpan; Sirviö, Juho Antti; Haapala, Antti; Liimatainen, Henrikki (2017) Cellulose Nanofibrils from Nonderivatizing Urea-Based Deep Eutectic Solvent Pretreatments. - ACS applied materials & interfaces 9 (3), 2846-2855. http://dx.doi.org/10.1021/acsami.6b13625

Luukkonen, Tero; Abdollahnejad, Zahra; Yliniemi, Juho; Kinnunen, Päivö; Illikainen, Mirja (2017) One-part alkali-activated materials : A review. - Cement and Concrete Research 103, 21-34. http://dx.doi.org/10.1016/j.cemconres.2017.10.001

Rissanen, Jouni; Ohenoja, Katja; Kinnunen, Päivö; Illikainen, Mirja (2017) Partial Replacement of Portland-Composite Cement by Fluidized Bed Combustion Fly Ash. - Journal of materials in civil engineering 29 (8), 04017061. http://dx.doi.org/10.1061/(ASCE)MT.1943-5533.0001899

Rudolph, Martin; Hartmann, Robert (2017) Specific surface free energy component distributions and flotabilities of mineral microparticles in flotation: an inverse gas chromatography study. - Colloids and Surfaces A: Physicochemical and Engineering Aspects 513, 380-388. http://dx.doi.org/10.1016/j.colsurfa.2016.10.069

Sethi, Jatin; Illikainen, Mirja; Sain, Mohini; Oksman, Kristiina (2017) Polylactic acid/polyurethane blend reinforced with cellulose nanocrystals with semi-interpenetrating polymer network (S-IPN) structure. - European Polymer Journal 86, 188-199. http://dx.doi.org/10.1016/j.eurpolymj.2016.11.031

Sirviö, J.A.; Visanko, M.; Hildebrandt, N.C. (2017) Rapid preparation of all-cellulose composites by solvent welding based on the use of aqueous solvent. - European Polymer Journal 97, 292-298. https://doi.org/10.1016/j.eurpolymj.2017.10.021

Sirviö, Juho Antti; Heiskanen, Juha P. (2017) Synthesis of Alkaline-Soluble Cellulose Methyl Carbamate Using a Reactive Deep Eutectic Solvent. - ChemSusChem 10 (2), 455-460. http://dx.doi.org/10.1002/cssc.201601270

Sirviö, Juho Antti; Visanko, Miikka Tuomas (2017) Anionic wood nanofibers produced from unbleached mechanical pulp by highly efficient chemical modification. - Journal of Materials Chemistry A 5 (41), 21828-21835. http://dx.doi.org/10.1039/C7TA05668K

Sreenivasan, Harisankar; Kinnunen, Päivö; Heikkinen, Eetu-Pekka; Illikainen, Mirja (2017) Thermally treated phlogopite as magnesium-rich precursor for alkali activation purpose. - Minerals Engineering 113, 47-54. https://doi.org/10.1016/j.mineng.2017.08.003

Suopajärvi, Terhi; Sirviö, Juho Antti; Liimatainen, Henrikki (2017) Cationic nanocelluloses in dewatering of municipal activated sludge. - Journal of Environmental Chemical Engineering 5 (1), 86-92

Suopajärvi, Terhi; Sirviö, Juho Antti; Liimatainen, Henrikki (2017) Nanofibrillation of deep eutectic solvent-treated paper and board cellulose pulps. - Carbohydrate polymers 169, 167-175. https://doi.org/10.1016/j.carbpol.2017.04.009

Tomperi, J.; Koivuranta, E.; Leiviskä, K. (2017) Predicting the effluent quality of an industrial wastewater treatment plant by way of optical monitoring. - Journal of water process engineering 16, 283-289. http://dx.doi.org/10.1016/j.jwpe.2017.02.004

Tomperi, Jani; Koivuranta, Elisa; Kuokkanen, Anna; Leiviskä, Kauko (2017) Modelling the effluent quality based on a real-time optical monitoring of the wastewater treatment process. - Environmental technology 38 (1), 1-13. http://dx.doi.org/10.1080/09593330.2016.1181674

Upola, Heikki; Ämmälä, Ari; Illikainen, Mirja (2017) Fractional pulping of packaging board in high consistency drum pulping. - Tappi Journal 16 (2), 89-95

Visanko, Miikka; Sirviö, Juho Antti; Piltonen, Petteri; Liimatainen, Henrikki; Illikainen, Mirja (2017) Castor oil-based biopolyurethane reinforced with wood microfibers derived from mechanical pulp. - Cellulose 24 (6), 2531-2543. http://dx.doi.org/10.1007/s10570-017-1286-x

Visanko, Miikka; Sirviö, Juho Antti; Piltonen, Petteri; Sliz, Rafal; Liimatainen, Henrikki; Illikainen, Mirja (2017) Mechanical fabrication of high-strength and redispersible wood nanofibers from unbleached groundwood pulp. - Cellulose 24 (10), 4173-4187. http://dx.doi.org/10.1007/s10570-017-1406-7

Yliniemi, Juho; Paiva, H.; Ferreira, T. M. ; Tiainen, Minna; Illikainen, Mirja (2017) Development and incorporation of lightweight waste-based geopolymer aggregates in mortar and concrete. - Construction and building materials 131, 784-792. http://dx.doi.org/10.1016/j.conbuildmat.2016.11.017

Yliniemi, Juho; Pesonen, Janne; Tanskanen, Pekka; Peltosaari, Olli; Tiainen, Minna; Nugteren, Henk; Illikainen, Mirja (2017) Alkali activation-granulation of hazardous fluidized bed combustion fly ashes. - Waste and biomass valorization 8 (2), 339-348. http://dx.doi.org/10.1007/s12649-016-9580-7

2016

Czajkowski J, Kinnunen P, Haapanen K, Niinimäki J & Fabritius T (2016) Simultaneous magnetic observation and actuation of ferromagnetic sensors, Journal of Magnetism and magnetic materials vol. 27 no 2

Hartmann R, Sirviö J, Sliz R, Laitinen O, Liimatainen H, Ämmälä A, Fabritius T & Illikainen M (2016) Interactions between Cellulose Nanocrystals and Quartz: Adsorption and Wettability studies, Colloids and Surfaces A: Physicochemical and Engineering Aspects 489(20)207–215.

Herrera M, Sirviö J, Mathew A & Oksman K (2016) Environmental friendly and sustainable gas barrier on porous materials: Nanocellulose coatings prepared using spin- and dip-coating, Materials and Design, Volume 93, 5 March 2016, Pages 19–25.

Herrera N, Roch H, Salaberria A, Pino-Orellana M, Labidi J, Fernandes S, Radic D, Leiva A & Oksman K (2016) Functionalized blown films of plasticised polylactic-chitin nanocomposite - preparation and characterization, Materials and Design, Volume 92, 15 February 2016, Pages 846–852.

Herrera N, Salaberria A, Mathew A & Oksman K (2016) Plasticized polylactic acid nanocomposite films with cellulose and chitin nanocrystals prepared using extrusion and compression molding with two cooling rates: Effects on mechanical, thermal and optical properties, Composites Part A: Applied Science and Manufacturing, Volume 83, April 2016, Pages 89–97.

Hietala M, Ämmälä A, Silvennoinen J 6 Liimatainen H (2016) Fluting medium strengthened by periodate-chlorite oxidized nanofibrillated celluloses, Cellulose 23(1)427-437.

Kiventerä J, Yliniemi J, Golek L, Deja, J, Ferreira V & Illikainen M (2016) Utilization of sulphidic mine tailings in geopolymer materials, International Journal of Mineral Processing 149(2016) 104–110.

Kotanen L, Körkkö M, Ämmälä A & Niinimäki J (2015) Resource efficiency in deinked pulp production – a review, Tappi Journal (in press)

Laitinen O, Hartmann R, Sirviö JA, Liimatainen H, Rudolph M, Ämmälä A & Illikainen M (2016) Alkyl aminated nanocelluloses in selective flotation of aluminium oxide and quartz, Chemical Engineering Science 144(22)260–266.

Ohenoja K, Tanskanen P, Peltosaari O, Wigren V, Österbacka J & Illikainen M (2016) Effect of particle size distribution on the self-hardening property of biomass-peat fly ash from a bubbling fluidized bed combustion, Fuel processing technology 148(2016)60–66.

Ohenoja K, Tanskanen P, Wigren V, Kinnunen P, Körkkö M, Peltosaari O, Österbacka J & Illikainen M (2016) Self-hardening of fly ashes from a bubbling fluidized bed combustion of peat, forest industry residuals, and wastes, Fuel 165(2016)440-446.

Ojala J, Sirviö JA & Liimatainen H (2016) Nanoparticle emulsifiers based on bifunctionalized cellulose nanocrystals as marine diesel oil-water emulsion stabilizers, Chemical Engineering Journal 288(15) 312–320.

Oksman K, Aitomäki Y, Mathew A, Siqueira G, Zhou Q, Butylina S, Tanpichai S, Zhou X & Hooshmand S (2016) Review of the recent development in cellulose nanocomposite processing, Composite part A  83(April) 2–18.

Pesonen J, Yliniemi J, Illikainen I, Kuokkanen T & Lassi U (2016) Stabilization/solidification of fly ash from fluidized bed combustion of recovered fuel and biofuel using alkali activation and cement addition, Journal of Environmental Chemical Engineering 4(2)1759–1768.

Pihlajaniemi V, Sipponen M, Liimatainen H, Sirviö J, Nyyssölä A & Laakso S (2016) Weighing the factors behind enzymatic hydrolyzability of pretreated lignocellulose, Green Chemistry, 2016, 18, 1295–1305.

Siqueira G, Oksman K, Tadokoro S & Mathew A (2016) Re-dispersible carrot nanofibers with high mechanical properties and reinforcing capacity for use in composite materials, Composite science and technology vol. 123(Feb)  49-56.

Sirviö J, Hasa T, Leiviskä T, Liimatainen H, & Hormi O (2016) Bisphosphonate nanocellulose in the removal of vanadium(V) from water, Cellulose 23(1)689-697.

Sirviö J, Visanko M, Laitinen O, Ämmälä A &Liimatainen H (2016) Amino-modified cellulose nanocrystals with adjustable hydrophobicity from combined regioselective oxidation and reductive amination. Carbohydrate polymers 136, 581-587.

Song T, Tanpichai S & Oksman K (2016) Cross-linked polyvinyl alcohol (PVA) foams reinforced with cellulose nanocrystals (CNCs), Cellulose April 2016, Volume 23

Tomperi J, Koivuranta E, Kuokkanen A, Juuso E & Leiviskä K (2016) Real-time optical monitoring of wastewater treatment process, Environmental Techonology 37(3)16 344-351.

Upola H, Ämmälä A, Kankaanpää V & Illikainen M (2016) Press wetting as an enhanced wetting method for baled OCC material, Tappi Journal 15(1):9.

Upola H, Ämmälä A, Kankaanpää V & Illikainen M (2016) Falling impact as an isolated disintegration mechanism in drum pulping for packaging material, Tappi Journal 15(1):33.

Yliniemi J, Nugteren H, Illikainen M, Tiainen M, Weststrate R & Niinimäki J (2016) Lightweight aggregates produced by granulation of peat-wood fly ash with alkali activator, International Journal of Mineral Processing 149(10)42–49.

 

2015

Dwivedia AD, Dubeya SB, Sillanpää M, Kwon Y-N., Suopajärvi T, Liimatainen H, Niinimäki J & Lee C (2015) Distinctive green recovery of silver species from modified cellulose: Mechanism and spectroscopic studies, International Journal of Biological Macromolecules 76 (2015) 109-118.

Haapala A, Härkönen J, Leviäkangas P, Kess P, Häggman H, Arvola J, Stoor T, Ämmälä A, Karppinen K, Leppilampi M & Niinimäki J (2015) Bioeconomy potential focus on Northern Finland. Int. J. of Sustainable Economy 7(1):66 – 90.

Haapanen K, Kinnunen P, Czajkowski J, Lahti A & Illikainen M (2015) Observation of viscoelastic solutions with ferromagnetic stirrers. Sensors and actuators A: Physical 236, 309-314.

Kaakinen J, Kuokkanen T, Leskinen H, Välimäki I & Kujala K (2015) The use of a four-stage sequential leaching procedure and the corresponding one-phase extractions for risk assessment of potential harmful substances such as heavy metals in waste rock utilized in railway ballast. Chemical speciation and bioavailability 27 (2), 71-80.

Karjalainen M, Ämmälä A, Rousu P & Niinimäki J (2015) Fractionation of epidermal cells from wheat straw pulp by flotation. Tappi Journal 14 (4), 229-235.

Kekäläinen K, Liimatainen H, Biale F & Niinimäki J (2015) Nanofibrillation of TEMPO-oxidized bleached hardwood kraft cellulose at high solids content. Holzforschung 69 (9), 1077-1088.

Kemppainen K, Upola H & Körkkö M (2015) Ink and dirt behavior in repulping after artificial aging of coldset offset printed newspapers at different temperatures, NPPRJ vol 30, no 3

Koivuranta E, Stoor T, Hattuniemi J & Niinimäki (2015) On-line optical monitoring of activated sludge floc morphology. Journal of Water Process Engineering 5(Apr.):28–34.

Koivuranta E, Suopajärvi T, Stoor T, Hattuniemi J & Niinimäki J (2015) Use of Optical Monitoring to Assess the Breakage of Activated Sludge Flocs. Particulate science and technology 33 (4), 412-417.

Liimatainen H, Sirviö J, Kekäläinen K & Hormi O (2015) High-consistency milling of oxidized cellulose for preparing microfibrillated cellulose films. Cellulose 22 (5), 3151-3160.

Ohenoja K & Illikainen M (2015) Effect of operational parameters and stress energies on stirred media milling of talc, Powder Technology 283 (2015) 254-259.

Ohenoja K, Tanskanen P, Wigren V, Kinnunen P, Körkkö M, Peltosaari O, Österbacka J & Illikainen M (2016) Self-hardening of fly ashes from a bubbling fluidized bed combustion of peat, forest industry residuals, and wastes. Fuel 165 (1), 440-446.

Sirviö J, Honkaniemi S, Visanko M & Liimatainen H (2015) Composite Films of Poly(vinyl alcohol) and Bifunctional Cross-linking Cellulose Nanocrystals. ACS applied materials & interfaces 7 (35), 19691-19699.

Sirviö J, Visanko M & Liimatainen H (2015) Deep eutectic solvent system based on choline chloride – urea as a pre-treatment for nanofibrillation of wood cellulose, Green chemistry 17 (6), 3401-3406.

Suopajärvi T, Liimatainen H & Niinimäki J (2015) Morphological analyzes of some micro- and nanofibrils from birch and wheat straw sources. Journal of Wood Chemistry and Technology 35 (2), 102-112

Suopajärvi T, Liimatainen H, Karjalainen M, Upola H & Niinimäki J (2015) Lead adsorption with sulfonated wheat pulp nanocelluloses. Journal of Water Process Engineering  5, 136-14.

Upola H, Laitinen O, Körkkö M & Ämmälä A (2015) Applying image analysis to measure flake content and flake size distribution in pulping of packaging board, NPPRJ vol 30, no 3

Visanko M, Liimatainen H, Sirviö J, Mikkonen K, Sliz R, Tenkanen M, Hormi O & Niinimäki J (2015) Butylamino-functionalized cellulose nanocrystal films: barrier properties and mechanical strength, RCS Advances 5 (20), 15140-15146.

Yliniemi J, Pesonen J, Tiainen M & Illikainen M (2015) Alkali activation of recovered fuel-biofuel fly ash from fluidised-bed combustion: Stabilization/solidification of heavy metals, Waste Management 43, 273-282

Ämmälä A, Jokinen H, Niinimäki J & Illikainen M (2015) Effect of design and operational parameters to the machine screen pulsation and energy consumption, Nordic pulp & paper research journal 30 (2), 215-219.

Ämmälä A, Jokinen H, Niinimäki J, Illikainen M (2015) Role of foil pulsation in the capacity of a machine screen, Nordic pulp & paper research journal 30 (2), 220-224.

 

2014

Hietala M & Oksman K (2014) Technologies for separation of cellulose nanofibers. in Handbook of green materials. vol. 1. Bionanomaterials : separation processes, characterization and properties. eds. Oksmann, Kristina; Mathew, Aji P.; Bismarck, Alexander; Rojas, Orlando J.; Sain, Mohini. World Scientific series in materials and energy. p. Singapore. 53-71.

Hietala M, Rollo P, Kekäläinen K & Oksman K (2014) Extrusion processing of green biocomposites: compounding, fibrillation efficiency, and fiber dispersion. Journal of Applied Polymer Science 131(6):39981

Hokkanen S, Repo E, Suopajärvi T, Liimatainen H, Niinimäki J & Sillanpää M (2014) Adsorption of Ni(II), Cu(II) and Cd(II) from aqueous solutions by amino modified nanostructured microfibrillated cellulose. Cellulose (21):1471–1487.

Illikainen,M, Kerätär K, Lassi U & Miettinen A (2014) Materiaalitehokkuus fokuksessa Oulun yliopistossa. Ympäristö ja Terveys (7):42-45.

Illikainen M, Tanskanen P, Kinnunen P, Körkkö M, Peltosaari O, Wigren V, Österbacka J, Talling B & Niinimäki J (2014) Reactivity and self-hardening of fly ash from fluidized bed combustion of wood and peat. Fuel 135(1):69-75.

Kangas H, Laitinen O, Niinimäki J &, Pitkänen M (2014) Amount, characteristics and toxicity of nano-scale material in fibrillated celluloses - Methods and properties of size-fractionated samples. (Abstrakti). 7th Tappi International Conference on Nanotechnology for Renewable Materials, 24 - 27 Jun. 2013, Stockholm, Sweden. Tappi. Tappi international conference on nanotechnology of renewable materials.

Kaakinen J, Kuokkanen T,  Pesonen J ; Välimäki I (2014) 'Comparison of different standard methods to evaluate the total concentrations of heavy metals in waste rock. Soil and Sediment Contamination 23(4) 437-451.

Kangas H, Lahtinen P, Sneck A, Saariaho A-M, Laitinen O & Hellen E (2014) Characterization of fibrillated celluloses. A short review and evaluation of characteristics with a combination of methods. Nordic Pulp and Paper Research Journal 29(1):129-143.

Karinkanta P, Illikainen M & Niinimäki J (2014) Effect of different impact events in fine grinding mills on the development of the physical properties of dried Norway spruce (Picea abies) wood in pulverization. Powder Technology (253):352-359.

Karinkanta P, Illikainen M & Niinimäki J (2014) Effect of mild torrefaction on pulverization of Norway spruce (Picea abies) by oscillatory ball milling: particle morphology and cellulose crystallinity. Holzforschung 68(3):337-343.

Kekäläinen K, Liimatainen H, Illikainen M, Maloney T & Niinimäki J (2014) The role of hornification in the disintegration behaviour of TEMPO-oxidized bleached hardwood fibres in a high-shear homogenizer. Cellulose 21(3):1163-1174.

Kekäläinen K, Liimatainen H & Niinimäki J (2014) Disintegration of periodate-chlorite oxidized hardwood pulp fibres into cellulose microfibrils - Kinetics and charge threshold of disintegration. Cellulose 21(5):3691-3700.

Kinnunen P, Carey M E, Craig E, Brahmasandra S & McNaughton B (2014) Rapid bacterial growth and antimicrobial response using self-assembled magnetic bead sensors, Sensors and Actuators B: Chemical,  Vol. 190, January 2014, pp. 265-269.

Koivuranta E, Keskitalo J, Stoor T, Hattuniemi J, Sarén M & Niinimäki J (2014) A comparison between floc morphology and the effluent clarity at a full-scale activated sludge plant using optical monitoring. Environmental Technology 35(13-16):1605-1610.

Kotanen L, Körkkö M, Ämmälä & Niinimäki J (2014) Resource efficiency in deinked pulp production – a review. - Tappi Journal 13 (11):37-43

Körkkö M, Haapala A, Ämmälä A, Liimatainen H & Niinimäki J (2014) Effect of wavelength selection on determination of ink content and ink elimination at 700 or 950 nm. Tappi Journal 13(1):45-52.

Körkkö M, Kotanen L, Rislakki M, Voss D, Wäsche E, Haarla J & Niinimäki J (2014) ZRI Concept for Recovering Fibers from Fine Screen Rejects – A Mill Trial. Proc. Tappi Peers.

Laitinen O & Niinimäki J (2014) Fractional Study of the Microfibrillated Cellulose. Tappi Journal 13(7):49-55.

Laitinen O, Joensuu I, Niskanen T & Niinimäki J (2014) Analysis of the external fibrillation. Int. Papwirtsch. (10):46-52.

Laitinen O, Kemppainen K, Ämmälä A, Sirviö J, Liimatainen H & Niinimäki J (2014) Use of chemically modified nanocelluloses in flotation of hematite and quartz. Industrial & engineering chemistry research 53(52):20092−20098.

Liimatainen H, Suopajärvi T, Sirviö JA, Hormi O & Niinimäki J (2014) Fabrication of cationic cellulosic nanofibrils through aqueous quaternization pretreatment and their use in colloid aggregation. Carbohydrate Polymers (103):187-192.

Ohenoja K, Breitung-Faes S, Kinnunen P, Illikainen M, Saari J, Kwade A & Niinimäki J (2014) Ultrafine grinding of limestone with sodium polyacrylates for use as an additive in OPC mortar. Chemical Engineering & Technology 37(5):787-794.

Ohenoja K, Saari J, Illikainen M, Breitung-Faes S, Kwade A & Niinimäki J (2014) Effect of polydispersity index on the grinding limits of highly concentrated limestone suspensions. Chemical Engineering & Technology 37(5):833-839.

Ohenoja K, Saari J, Illikainen M & Niinimäki J (2014) Effect of molecular weight of sodium polyacrylates on the particle size distribution and stability of a TiO2 suspension in aqueous stirred media milling. Powder Technology (262):188-193.

Piltonen P, Karinkanta P & Niinimäki J (2014) The effect of styrene-butadiene latex carboxylation on adhesion. International Journal of Adhesion and Adhesives (54):82-85.

Pitkänen M, Kangas H, Laitinen O, Sneck A, Lahtinen P, Peresin S & Niinimäki J (2014) Characteristics and safety of nano-sized cellulose fibrils. Cellulose 21(6):3871–3886.

Sirviö JA, Anttila A-K, Pirttilä A-M, Liimatainen H, Kilpeläinen I, Niinimäki J & Hormi O (2014) Cationic wood cellulose films with high strength and bacterial anti-adhesive properties. Cellulose 21(5)3573-3583.

Sirviö JA, Kolehmainen A, Liimatainen H, Niinimäki J & Hormi O (2014) Biocomposite cellulose-alginate films: Promising packaging materials. Food chemistry (151):343-351. http://dx.doi.org/10.1016/j.foodchem.2013.11.037

Sirviö JA, Kolehmainen A, Visanko M, Liimatainen H, Niinimäki J & Hormi O (2014) Strong, Self-Standing Oxygen Barrier Films from Nanocelluloses Modified with Regioselective Oxidative Treatments. ACS applied materials & interfaces 6(16):14384-14390.

Sirviö JA, Liimatainen H, Visanko M & Niinimäki J (2014) Optimization of dicarboxylic acid cellulose synthesis : Reaction stoichiometry and role of hypochlorite scavengers. Carbohydrate polymers (114):73-77

Suopajärvi T, Koivuranta E, Liimatainen H & Niinimäki J (2014) Flocculation of municipal wastewaters with anionic nanocelluloses: Influence of nanocellulose characteristics on floc morphology and strength. Journal of Environmental Chemical Engineering (2):2005-2012.

Visanko M, Liimatainen H, Sirviö J, Haapala A, Sliz R, Niinimäki J & Hormi O (2014) Porous thin film barrier layers from 2,3-dicarboxylic acid cellulose nanofibrils for membrane structures. Carbohydrate polymers (102):584-589.

Visanko M, Liimatainen H, Sirviö J, Heiskanen J, Niinimäki J & Hormi O (2014) Amphiphilic cellulose nanocrystals from acid-free oxidative treatment: physico-chemical characteristics and use as an oil-water stabilizer. Biomacromolecules 15(7):2769-2775.,DOI: 10.1021/bm500628g

2013

Anttila A-K, Pirttilä AM, Häggman H, Harju A, Venäläinen M, Haapala A, Holmbom B, Julkunen-Tiitto, R (2013) Condensed conifer tannins as antifungal agents in liquid culture. Holzforschung DOI: 10.1515/hf-2012-0154

Hietala M, Rollo P, Kekäläinen K & Oksman K (2013) Extrusion processing of green biocomposites: compounding, fibrillation efficiency and fiber dispersion. Journal of Applied Polymer Science DOI: 10.1002/app.39981

Haapala A, Laitinen O, Karinkanta P, Liimatainen H, Niinimäki J (2013) Optical characterisation of size, shape and fibrillarity from microfibrillar and microcrystalline cellulose, and fine ground wood powder fractions. Appita Journal, 66(4):331-339.

Haapala, Antti; Laitinen, Ossi; Karinkanta, Pasi; Liimatainen, Henrikki; Niinimäki, Jouko (2013) Optical characterization of micro-scale cellulose particles and wood powder. Appita 2013 Annual Conference Proceedings Melbourne, Australia, 8-10 May 2013. p. 70-77.

Illikainen M, Kinnunen P, Körkkö M & Niinimäki J (2013) Utilization of fly ash from fluidized bed combustion of biomass as a cement replacement material in mortar. Waste Recycling 17 : 17th Int. Conference on Waste Recyclinge, Kosice, Slovakia, November 21-22, SAS. 7

Karinkanta P, Illikainen M & Niinimäki J (2013) Impact-based pulverisation of dried and screened Norway spruce (Picea abies) sawdust in an oscillatory ball mill. Powder Technology 233(1), p. 286-294.

Karinkanta P, Illikainen M &Niinimäki J (2013) Effect of grinding conditions in oscillatory ball milling on the morphology of particles and cellulose crystallinity of Norway spruce (Picea abies). Holzforschung 67(3), pp. 277-283.

Karjalainen M, Ämmälä A, Rousu P & Niinimäki J (2013) Fractionation of wheat straw pulp cells in a hydrocyclone. Nordic Pulp & Paper Research Journal 28(2) p. 282-289.

Karjalainen M, Ämmälä A, Rousu P & Niinimäki J (2013) Fractionation of wheat straw pulp cells in ultra-fine pressure screening. Appita Journal 66(1) pp. 73-80.

Kemppainen K, Haapala A, Körkkö M & Niinimäki J (2013)  Ink and dirt behavior in pulping after artificial aging of cold-set offset printed newspapers in different humidity conditions. Resources, Conservation and Recycling, vol. 76 July, p. 41-49.

Kinnunen P, McNaughton BH, Niinimäki J (2013) Note: A portable magnetic field for powering nanomotors, microswimmers and sensors, Review of Scientific Instruments 84 086109 http://dx.doi.org/10.1063/1.4817630. 

Koivuranta E, Keskitalo J, Haapala A, Stoor T, Sarén M & Niinimäki J (2013) Optical Monitoring of Activated Sludge Flocs in Bulking and Nonbulking Conditions. Environmental Technology 34(5) p. 679-686.

Körkkö M, Haapala A, Ämmälä A & Niinimäki J (2013) A review of reflectance-based ink content determination on recycle pulps. Appita J 66(1), p. 47-53.

Körkkö M, Kemppainen K, Haapala A, Mäkinen L & Niinimäki J (2013) Test medium for ERIC analysis – the effect of furnish. Proceedings of Tappi Peers, 10th research forum on recycling, September 15-18, Green Bay, USA. p. 2188-2194

Laitinen O, Bauer K, Niinimäki J & Peuker U (2013) Validity of Rumpf and Rabinovich roughness adhesion force models with nanoscale rough alumina substrates. Powder Technology 246(2013) p. 545- 552

Liimatainen H, Visanko M, Sirviö J, Hormi O & Niinimäki J (2013) Sulfonated cellulose nanofibrils obtained from wood pulp through regioselective oxidative bisulfite pre-treatment, Cellulose 20(2) pp. 741-749.

Liimatainen H, Sirviö J, Pajari H, Hormi O & Niinimäki J (2013) Regeneration and Recycling of Aqueous Periodate Solution in Dialdehyde Cellulose Production, Journal of Wood Chemistry and Technology 33(4) pp. 258-266.

Liimatainen H, Sirviö J, Visanko M, Suopajärvi T, Ezekiel N, Hormi O & Niinimäki J (2013) Nanofibrillation of cellulose pulp using regioselective periodate pre-treatments. in Production and Applications of Cellulose Nanoparticles. eds. Postek, Michael T.; Moon, Robert J.; Rudie, Alan W; Bilodeau, Michael A.. Nocross, GA, USA, Tappi Press. p. 183-185

Mäkinen L, Ämmälä A, Körkkö M & Niinimäki J (2013) The effects of recovering fibre and fine materials on sludge dewatering properties at a deinked pulp mill. Resources, Conservation and Recycling 73(2013) p. 11-16.

Mäkinen L, Körkkö M, Haarla J, Ämmälä A, Niinimäki J (2013) Means of improving material efficiency in deinked pulp production. China International Paper Technology Exhibition and Conference 2013, September 24, 2013, Beijing, China. p. 100-109.

Mäkinen L, Körkkö M, Ämmälä A, Niinimäki J (2013) Resource efficiency in deinked pulp production - A review. Proceedings of Tappi Peers, 10th research forum on recycling, September 15-18, Green Bay, USA. p. 1789-1796

Ohenoja K, Illikainen M, Niinimäki J (2013) Effect of operational parameters and stress energies on the particle size distribution of TiO2 pigment in stirred media milling. Powder Technology 234 (2013), p. 91–96.

Ohenoja K, Saari J, Illikainen M, Niinimäki J (2013) Effect of the molecular structure of polymer dispersants on limestone suspension properties in fine grinding. Journal of Chemistry and Chemical Engineering 7(7) pp. 606-612.

Piltonen P, Stoor T & Niinimäki J (2013) On-site evaluation method for the nonstick properties of paper machine drying cylinder coating materials—a description of the methodology and two case studies. Measurement 46(3), p. 1061–1064.

Piltonen P, Stoor T & Niinimäki J (2013) The effect of rewetting on the adhesion tendency of styrene–butadiene latices on steel surfaces. International Journal of Adhesion and Adhesives Vol 40, 108-111.

Rousu P, Karjalainen M, Henricson K, Niinimäki J, Kajanto I & and Backfolk K (2013) Wheat straw pulp fractionation – Part 1. The effect of cells, vessels and fines on paper properties. Cellulose Chemistry and Technology 47(5-6) pp. 443-453.

Rousu P, Karjalainen M, Slawecki K, Henricson K, Niinimäki J & and Backfolk K (2013) Wheat straw pulp fractionation – Part 2. The effect of wheat straw fines on z-directional strength of paper, Cellulose Chemistry and Technology 47 (7-8) pp. 613-621.

Sirviö J, Kolehmainen A, Liimatainen H, Niinimäki J & Hormi O (2013) Sustainable packaging materials based on wood cellulose. RSC Advances, 3, pp. 16590-16596, DOI: 10.1039/C3RA43264E

Suopajärvi T, Liimatainen H, Hormi O & Niinimäki J (2013) Coagulation-flocculation treatment of municipal wastewater based on anionized nanocelluloses. Chemical Engineering Journal vol. 231 Sep., pp. 59-67.

Suopajärvi T, Liimatainen H & Niinimäki J (2013) Nanocelluloses in wastewater treatment applications. Proceedings of the 9 th Biennial Johan Gullichsen Colloquium, 14 th Nov. 2013, Espoo, Finland. p. 37-42

Ämmälä A, Mäkinen L, Liimatainen H & Niinimäki J (2013) Effect of carboxymethylcellulose and starch on recovery of filler and fines in tertiary flotation. Tappi Journal 12(3) 43-50.

Ämmälä A, Liimatainen H, Burmeister C, Niinimäki J (2013) Effect of tempo and periodate-chlorite oxidized nanofibrils on ground calcium carbonate flocculation and retention in sheet forming and on the physical properties of sheets. Cellulose 20(5) pp. 2451-2460.

 

2012

Haapala A, Körkkö M, Koivuranta E & Niinimäki J (2012) Optical analysis of ink and other process water contaminants. Tappi Journal 11(7), p. 51-58

Haapala A, Körkkö M, Kemppainen K, Stoor T & Niinimäki J (2012) Paper machine white water deaeration and two-stage flotation with channel flow. Tappi Journal 11(7), p. 51-58

Karinkanta P, Illikainen M & Niinimäki J (2012) Pulverisation of Norway spuce (Picea abies) sawdust with classifying impact mill. Biomass and Bioenergy 44, 96-106

Karjalainen M, Ämmälä A, Rousu P & Niinimäki J (2012) Method for automatic analysis of wheat straw pulp cell types. BioResources 7(1), 827-840.

Kekäläinen K, Illikainen M & Niinimäki J (2012) Morphological changes in never-dried kraft fibers under mechanical shearing. Cellulose 19 (3), 879 - 889

Kekäläinen K, Illikainen M & Niinimäki J (2012) Gradual disintegration procedure in optimization of chemi-mechanical treatment for micro- and nanocellulose production. International Conference on Nanotechnolofy for Renewable Materials, Montreal, Canada, 4 - 7 June 2012. Tappi. 1-33.

Kemppainen K, Körkkö M & Niinimäki J (2012) A novel approach for pulping toner and pigment-based inkjet ink printed papers. Proceedings of 15th PTS-CTP Deinking Symposium. Munich, PTS. 401-410.

Körkkö M, Bussini D, Laitinen O, Elegir G & Niinimäki J (2012) True-neutral fractional deinking for flexographic and offset newsprints. Appita J. 65(1), p. 71-77

Körkkö M, Ämmälä A & Niinimäki J (2012) Reflectance-based ink content measurement - recent findings on affecting parameters. 66th Appita Annual Conference and Exhibition - Melbourne, Australia 15 - 18 April 2012. Appita. 14-19

Körkkö, Mika; Bussini, Daniel; Kemppainen, Kalle; Elegir, Graziano; Niinimäki, Jouko (2012) Fractional pulping using recovered paper mixtures of flexographic and offset printed newspapers with magazines. Proceedings of TAPPI PEERS conference, october 14-18, 2012, Savannah, Georgia. Tappi. TAPPI PEERS. Yhdysvallat, Tappi. 81-86

Liimatainen H, Sirviö J, Sundman O, Hormi O & Niinimäki J (2012) Use of nanoparticular and soluble anionic cellulose in coagulation-flocculation treatment of kaolin. Water Research 46(7), p. 2159–2166.

Liimatainen H, Visanko M, Sirviö J, Hormi O & Niinimäki J (2012) Enhancement of the nanofibrillation of wood cellulose through sequential periodate-chlorite oxidation. Biomacromolecules 13(5), p. 1592-1597.

Mäkinen L, Ämmälä A, Pirkonen P & Niinimäki J (2012) Sludges - Analysis procedure for evaluating the utilisation potential. ipw (1), p. 36-42.

Mäkinen L, Körkkö M, Ämmälä A, Haapala A, Suopajärvi T & Niinimäki J (2012) Recovering fibres from fine-pre-screening reject at deinking mills. Tappi Journal 11(11) p. 53-62.

Ohenoja K, Saari J, Illikainen M & Niinimäki J (2012) The effect of molecular structure of polymer dispersants on the suspension properties in the fine grinding of limestone. XXVI International Mineral Processing Congress.

Piltonen P, Stoor T & Niinimäki J (2012) Adhesion of pressure sensitive adhesives and latex films on cast iron and low-energy surface. International Journal of Adhesion and Adhesives, vol. 36 p. 15-19.

Piltonen P & Niinimäki J (2012) Sticking of difficult materials onto paper machine surfaces - Zanieczyszczenie powierzchni elementów maszyny papierniczej substancjami kleistymi. Przeglad Papierniczy 68(10), 607-610.

Piltonen, Petteri; Niinimäki, Jouko (2012) Sticking of difficult materials onto paper machine surfaces - From deep understanding of the phenomena to the prevention of problems. Zellcheming 2012, 107th Annual General Meeting and EXPO, Wiesbaden, June 26 - 28, p . 1-6

Suopajärvi T, Liimatainen H & Niinimäki J (2012) Fragment analysis of different size-reduced lignocellulosic pulps by hydrodynamic fractionation, Cellulose 19(1), 237-248

2011

Haapala A, Körkkö M, Koivuranta E & Niinimäki J (2011) Recent Advances in Process Water Optical Analysis. Proceedings of Tappi PEERS 2011, October 2-5, Portland Oregon. 315-323

Hietala M, Niinimäki J & Oksman K (2011) The use of twin-screw extrusion in processing of wood: The effect of processing parameters and pretreatment. BioResources 6(4), p. 4615-4625.

Hietala M, Samuelsson E, Niinimäki J & Oksman K (2011) The effect of pre-softened wood chips on wood fibre aspect ratio and mechanical properties of wood-polymer composites. Composites Part A: Applied Science and Manufacturing 42 (12), p. 2110-2116.

Hietala M, Niinimäki J & Oksman K (2011) Processing of wood chip–plastic composites: effect on wood particle size, microstructure and mechanical properties, Plastics, Rubber and Composites 40(2), p. 49-56.

Karinkanta P, Illikainen M & Niinimäki J (2011) The effect of anisotropicity of Norway spruce (Picea abies) during two-body abrasion. Wear 272(1), p. 38-42.

Kemppainen K, Laitinen O, Körkkö M, Illikainen M & Niinimäki J (2011) Analysis of prewetting conditions for old magazine papers before pulping in deinking. Tappi Journal 10(6), p. 7-15.

Kemppainen K, Körkkö M & Niinimäki J (2011) Fractional pulping of toner and pigment-based inkjet ink printed papers - ink and dirt behavior. BioResources 6(3), p. 2977-2989.

Kuokkanen M, Vilppo T, Kuokkanen T, Stoor T & Niinimäki J. (2011) Additives in wood pellet production – a pilot-scale study of binding agent usage, BioResources 6(4), p. 4331-4355.

Körkkö M, Haapala A, Mäkinen L, Ämmälä A & Niinimäki J. (2011) Comparison of test medium preparation methods for residual ink analysis. Tappi Journal 10(10), p. 7-14.

Körkkö M, Laitinen O, Haapala A, Ämmälä A & Niinimäki J (2011) Scattering properties at the near infrared region and its effect on the determination of residual ink. Tappi Journal 10(6), p. 17-22.

Körkkö M., Haapala A, Liimatainen H, Ämmälä A & Niinimäki J (2011) Challenges in residual ink measurement – Effect of fibre fines and fillers. Appita Journal, 64(1), p. 71-75.

Körkkö M, Bussini D, Laitinen O, Elegir G & Niinimäki J (2011) True-neutral fractional deinking for flexographic and offset newsprints. 65th Appita Annual Conference, Rotorua, New Zealand, 10-13 April 2011, p. 23-30.

Körkkö M, Haapala A, Ämmälä A, Liimatainen H & Niinimäki J (2011) Reflectance based ink content measurements – operational wavelength comparison between 700 nm and 950 nm. Conf. Proc. of TAPPI PEERS, Portland, USA, October 2011.

Laitinen O, Kemppainen K, Stoor, T & Niinimäki, J (2011) Fractionation of pulp and paper particles selectively by size. BioResources 6(1), p. 672-685.

Laitinen O (2011) Utilisation of tube flow fractionation in fibre and particle analysis. Acta Universitatis Ouluensis Technica C 382, Oulu, Finland: University of Oulu, 2011, 66 pp

Liimatainen H, Sirviö J, Sundman O, Visanko M, Hormi O & Niinimäki J (2011) Flocculation performance of a cationic biopolymer derived from a cellulosic source in mild aqueous solution. Bioresource Technology 102(20), p. 9626–9632.

Liimatainen H, Sirviö J, Haapala A, Hormi O & Niinimäki J (2011) Characterization of highly accessible microfibers generated by wet stirred media milling. Carbohydrate Polymers 83(4), p. 2005-2010.

Mäkinen L, Körkkö M, Haapala A, Suopajärvi T, Ämmälä A & Niinimäki J (2011) New approach to clean and recover fibres from fine screening reject. Conf. Proc. of TAPPI PEERS, Portland, USA, October 2011.

Rissanen R, Leinonen A, Haapala A & Kyyrönen P (2011) Comparison of sample pre-treatment methods on flow cytometry measurement of mechanical pulp. Proceedings of Tappi PEERS 2011, October 2-5, Portland Oregon. TAPPI. 141-146

Sirviö J, Hyväkkö U, Liimatainen H, Niinimäki J & Hormi O (2011) Periodate oxidation of cellulose at elevated temperatures using metal salts as cellulose activators. Carbohydrate Polymers 83(3), p. 1293-1297.

Sirviö J, Honka A, Liimatainen H, Niinimäki J & Hormi O (2011) Synthesis of water-soluble highly cationic cellulose derivative. Carbohydrate Polymers 86(1), p. 266-275.

Sirviö J, Liimatainen H, Niinimäki J & Hormi O (2011) Dialdehyde cellulose microfibers generated from wood pulp by milling-induced periodate oxidation. Carbohydrate Polymers 86(1), p. 265-270.

Suopajärvi T, Liimatainen H & Niinimäki J (2011) Disintegration tendency of different lignocellulose pulps and fractional analysis of formed microparticles. Cellulose, 19, p. 237–248.

2010

Haapala A, Honkanen M, Liimatainen H, Stoor T & Niinimäki J (2010) Hydrodynamic drag and rise velocity of microbubbles in papermaking process waters, Chemical Engineering Journal 162(3): 956–964

Haapala A, Körkkö M, Kemppainen K, MacNeil D & Niinimäki J (2010)  Purification of white waters by selective flotation, BioResources 5(4): 2153–2172

Haapala A, Liimatainen H, Körkkö M, Ekman J & Niinimäki J (2010) Runnability upgrade for a newsprint machine through defect identification and control - a mill case study, 64th Appita Annual Conference, Melbourne, Australia, 18-21 April 2010

Haapala A, Liimatainen H, Körkkö M, Ekman J, Salkinoja-Salonen M & Niinimäki J (2010) Web defects in newsprint production – a mill case study, Appita Journal 63(5): 358–363, 398.

Haapala A, Körkkö M, Kemppainen K, Stoor T & Niinimäki J (2010) Paper machine white water deaeration and purification in a selective two-stage flotation arrangement, Proceedings of 9th Research Forum on Recycling, Norfolk, USA, 18-21 October 2010

Haapala A (2010) Paper machine white water treatment in channel flow. Integration of passive deaeration and selective flotation. Acta Universitatis Ouluensis Technica C 371, Oulu, Finland: University of Oulu, 2010, 96 pp

Illikainen M, Härkönen E & Niinimäki J (2010)The Effect Of Acetone Extraction On The Disruptibe Shear Stress In Pine Thermomechanical Pulps. Pulp & Paper Canada, February 2010.

Illikainen M, Härkönen E & Niinimäki J (2010)Studies on the mechanisms of TMP refining - Volume fraction of pulp in the inner refining zone. Paperi ja Puu 92(3): 28 - 31.

Kekäläinen K, Suopajärvi T, Mathew A, Oksman K, Laitinen O & Niinimäki J (2010) Effect of peroxide treatment on energy consumption of refining and quality. ipw 9, 12 - 17

Kekäläinen K, Suopajärvi T, Mathew A, Oksman K, Laitinen O & Niinimäki J (2010) Effect of peroxide treatment on energy consumption of refining and quality of product in microfibrillar cellulose production, Zellcheming, 105th Annual Meeting and EXPO, Wiesbaden, Germany, June 29 – July 1, 2010, 17 pp.

Kemppainen K, Körkkö M, Haapala A, Illikainen M & Niinimäki J (2010) Benefits of fractionation during pulping in deinking, Proceedings of 9th Research Forum on Recycling, Norfolk, USA, 18-21 October

Kemppainen K, Laitinen O, Körkkö M, Illikainen M & Niinimäki J (2010) Analysis of recycled papers pre-wetting conditions prior to pulping in deinking – ONP furnish, Progress in Paper Recycling, 19(3) 4-16.

Körkkö M, Haapala A, Ämmälä A & Niinimäki J (2010) The influence of fines on measured near-infrared scattering and residual ink value, 64th Appita Annual Conference, Melbourne, Australia, 18-21 April 2010

Körkkö M, Laitinen O, Kemppainen K, Ämmälä A & Niinimäki J (2010) Effects of Dwell Time and Mixing Intensity After High Consistency Pulping of Recycled Papers on Ink Detachment and Fragmentation, Progress in Paper Recycling 19(1): 3–10

Körkkö M, Haapala A, Mäkinen L, Ämmälä A & Niinimäki J (2010) A novel sheet preparation method for ink content measurement in paper recycling, Proceedings of 9th Research Forum on Recycling, Norfolk, USA, 18-21 October 2010

Laari A, Haapala A & Turunen I (2010) Gas separation from paper machine white water in open channel flow: Comparison of PIV measurements and CFD simulations, 19th International Congress of Process and Chemical Engineering CHISA 2010 & 7th European Congress of Chemical Engineering ECCE-7, Prague, Czech Republic, 28 August -1 September 2010

Liimatainen H, Haapala A, Sirviö J, Hormi O & Niinimäki J (2010) Production of cellulose microparticles from pulp fibres by wet stirred media milling, 64th Appita Annual Conference, Melbourne, Australia, 18-21 April 2010

Mäkinen L, Ämmälä A, Vahlroos-Pirneskoski S, Körkkö M, Sarja T & Niinimäki J (2010) Fractionation prior to deinking - a study of optical properties of fractions, ipw no. 4-5, 2010

Mäkinen L, Ämmälä A, Pirkonen P & Niinimäki J (2010) Analysis procedure for evaluating the utilisation potential of pulp and paper mill sludges, Zellcheming, 105th Annual Meeting and EXPO, Wiesbaden, Germany, June 29 – July 1, 2010, 13 pp.

Suopajärvi T, Mathew A, Kekäläinen K, Grubbström G, Oksman K, Laitinen O & Niinimäki J (2010) Comparison of methods in production of microfibrillar cellulose. ipw 12: 10-13

Suopajärvi T, Mathew A, Kekäläinen K, Grubbström G, Oksman K, Laitinen O & Niinimäki J (2010) Comparison of two refining methods in production of microfibrillar cellulose – Kinetics of refining and energy consumption., Zellcheming, 105th Annual Meeting and EXPO, Wiesbaden, Germany, June 29 – July 1, 2010, 20 pp. 

2009

Haapala A, Stoor T, Liimatainen H, Nelo M & Niinimäki J (2009) Passive white water deaeration efficiency in open channel flow. Appita Journal. 62(2), p. 105-109.

Haapala A, Honkanen M, Liimatainen H, Stoor T & Niinimäki J (2009) Hydrodynamic drag and velocity of micro-bubbles in dilute paper machine suspensions. Proceedings of Computational Methods in Multiphase Flow V, New Forest, UK, June 15-17, 2009. p. 343-354.

Haapala A, Körkkö M, Laitinen O & Niinimäki J (2009) Methods for process water ink content analysis. Proceedings of TAPPI Engineering, pulping and environmental conference, Memphis, TN, USA, October 14-16, 2009

Kuokkanen M, Kuokkanen T, Stoor T, Niinimäki J & Pohjonen V (2009) Chemical methods in the development of eco-efficient wood-based pellet production and technology. Waste Management & Research 2009: 27(6): 561–571

Körkkö M, Laitinen L, Haapala A, Ämmälä A & Niinimäki J (2009) The influence of PCC filler on near-infrared scattering, absorption and residual ink measurement error, Proceedings of Engineering, pulping and environmental conference, Memphis Convention Cook Center, Memphis, TN, USA, October 14-16, 2009

Laitinen O, Kemppainen K, Körkkö M, Stoor T & Niinimäki J (2009) The effect of pre-wetting of recycled raw material before pulping in a deinking process. Progress in Paper Recycling, vol. 18, no. 4, Nov. 2009, p. 24-32

Larkomaa J, Niinimäki J, Honkanen M, Hanif M & Saarenrinne P (2009) Effect of Fibre Properties on Flocculation and Fractionation of Cellulosic Fibres in Dry State. Journal of Engineered Fibers and Fabrics 4(4): 1-10

Liimatainen H, Haavisto S, Haapala A & Niinimäki J (2009) Influence of adsorbed and soluble carboxymethyl cellulose on fibre suspension dispersing, dewaterability and fines retention. BioResources, 4(1), p. 321-340.

Liimatainen H, Haapala A, Tomperi J & Niinimäki J (2009) Fibre floc morphology and dewaterability of a pulp suspension: role of flocculation kinetics and characteristics of flocculation agents. Bioresources 4(2): 640−658.

Liimatainen H, Haapala A & Niinimäki J (2009) Retention of PCC and GCC fillers on chemical pulp fines surfaces. Tappi Journal September 2009, 38-42.

Liimatainen H  (2009) Interactions between fibres, fines and fillers in papermaking. Influence on dewatering and retention of pulp suspensions. Acta Universitatis Ouluensis Technica C 334, Oulu, Finland: University of Oulu, 2009, 74 pp

Mäkinen L, Ämmälä A, Vahlroos-Pirneskoski S, Körkkö M, Sarja T & Niinimäki J (2009) Fractionation prior to deinking – A study of optical properties of fractions. Zellcheming, 104rd Annual Meeting and EXPO, Wiesbaden, Germany, June 23-25, 2009, 17 pp.

Suopajärvi T, Kekäläinen K, Illikainen M and Niinimäki J (2009) Effect of high intensity treatment on mechanical properties of low consistency pulp. Proceedings of TAPPI Engineering, Pulping and Environmental Conference, Memphis, TN, USA, October 14-16, 2009 

2008

Haapala A, Stoor T, Liimatainen H, Nelo M & Niinimäki J (2008) Passive white water deaeration efficiency in open channel flow. 62nd Appita Annual Conference, Rotorua, New-Zealand, 21-24 April 2008

Haapala A, Liimatainen H, Stoor T & Niinimäki J (2008) Local Air Content and Deaeration Efficiency in Open Channel Flow. ICPPB Nanjing, China, November 4-6, 2008. p. 763-768.

Illikainen M (2008) Mechanisms of thermomechanical pulp refining. Acta Universitatis Ouluensis Technica C 305, Oulu, Finland: University of Oulu, 2008, 104 pp.

Illikainen M, Härkönen E, Ullmar M & Niinimäki J (2008) Disruptive shear stress of spruce and pine TMP pulps.  Paperi ja Puu 90(2008)1: 47 – 52.

Koski A (2008) Applicability of crude tall oil for wood protection. Acta Universitatis Ouluensis, Technica C 293, Oulu, Finland: University of Oulu, 2007, 104 pp

Körkkö M, Laitinen O, Vahlroos S, Ämmälä A & Niinimäki J (2008) Effects of mineral fillers and pigments on residual ink measurement. 13th PTS-CTP – Deinking Symposium, Leipzig, 15 – 17 April 2008. Paper 8, p.1-10.

Körkkö M, Laitinen O, Saari J, Ämmälä A & Niinimäki J (2008) Recyclability of Release Paper. 103th ZELLCHEMING-Hauptversammlung, Wiesbaden, Germany, 24 – 26 June 2008.

Körkkö M, Laitinen O, Ämmälä A, Niinimäki J & Saari J (2008) Recyclability of Release Paper, ipw 9/2008 pp. 54-58.

Körkkö M, Laitinen O, Vahlroos S, Ämmälä A & Niinimäki J (2008) Components Removal in Flotation Deinking. Progress in Paper Recycling 17(4), p. 15-22.

Laitinen O, Körkkö M & Niinimäki J (2008) The effects of aging in different raw material furnishes. Progress In Paper Recycling, vol. 18, no. 1, November 2008, p. 9-15.

Liimatainen H, Taipale T, Haapala A & Niinimäki J (2008) Influence of mechanical pulp fines on clay retention. Tappi Journal Vol 7 No 12, p. 10-16.

Liimatainen H, Haapala A & Niinimäki J (2008)  Retention of Calcium Carbonate Fillers on Fines Surfaces. Conf. Proc. of ICPPB Nanjing, China, November 4-6, 2008. p. 513-518.

Liimatainen, H, Viitanen, A K, Haapala, A & Niinimäki J (2008) Application of analytical centrifugation for studying pulp dewatering and fibre interactions. 10th World Filtration Congress, April 14-18, Leipzig, p. 61-65.

Saarela J, Heikkinen S, Fabritius T, Haapala A & Myllylä R (2008) Refractive index matching improves optical object detection in paper. Measurement Science and Technology Journal 19(5)

Stoor T (2008) Air in pulp and papermaking processes. 62nd Appita Annual Conference,  Rotorua, New-Zealand, 21-24 April 2008

Vahlroos-Pirneskoski S, Körkkö M, Rosencrance S & Niinimäki J (2008) Post-bleaching response of pulps deinked using an alkaline fatty acid soap or reduced alkaline surfactant blend chemistry. Progress In Paper Recycling, vol. 17, no. 3, May 2008, pp 17-21. 

2007

Haapala A, Stoor T & Niinimäki J  (2007) Air in papermaking process. Association of Chemical Pulp and Paper Chemists and Engineers in Germany (Zellcheming) 102nd Annual Meeting. Wiesbaden, Germany, 25-28 June 2007

Illikainen M, Härkönen E & Niinimäki J (2007) Power consumption distribution in a TMP refiner - comparison of standard and unidirectional refiner segments. International Mechanical Pulping Conference, 6 - 9 May 2007. Minneapolis, Minnesota, USA.

Illikainen M, Härkönen E & Niinimäki J (2007) The effect of extractives on disruptive shear stress in pine TMP pulps. International Mechanical Pulping Conference, 6 - 9 May 2007. Minneapolis, Minnesota, USA.

Illikainen M, Härkönen E, Ullmar M & Niinimäki J (2007) Power consumption distribution in a TMP refiner: comparison of the first and second stages. Tappi J. 6(9):18-23.

Illikainen M & Niinimäki J (2007) Energy dissipation in a TMP refiner disc gap. The 6th Biennial Johan Gullichsen Colloquium. 15 November 2007, Espoo, Finland

Jokinen H, Karjalainen M, Niinimäki J & Ämmälä A (2007) Effect of furnish quality on pressure screen performance. Appita Journal 60(1):35-40.

Jokinen H, Stoor T, Ämmälä A, Yli-Viitala P & Niinimäki J (2007) Removal of air using a cleaner. Appita Journal 60(6):455-459

Jokinen H, Ämmälä A, Virtanen JA, Niinimäki J (2007) Pressure screen capacity – Current findings on the role of wire width and height. Tappi Journal 6(1):3-10

Jokinen H (2007) Screening and cleaning of pulp: a study to the parameters affecting separation. Acta Universitatis Ouluensis, Technica C 274, Oulu, Finland: University of Oulu, 2007, 137pp

Körkkö M, Laitinen O, Vahlroos S, Ämmälä A & Niinimäki J (2007) Components Removal in flotation deinking. 8th Research Forum on Recycling, Tappi 2007, Niagara Falls, Canada, 23 – 26 September 2007

Laari A, Haapala A, Stoor T & Turunen I (2007) Simulation of entrained air separation from paper machine circulation water using CFD. Proceedings of European Congress of Chemical Engineering (ECCE-6), Copenhagen 16–20, September 2007

Laitinen O, Körkkö M, Ämmälä A, Saren M & Niinimäki J (2007) Analysis of pulp component in a DIP process with tube flow fractionation. 8th Research Forum on Recycling, Tappi 2007, Niagara Falls, Canada, 23 – 26 September 2007

Liimatainen H, Kokko S, Haavisto S, Myllys M & Niinimäki J (2007) Fiber filters in water treatment-effect of fiber length and layering. Filtech Conference 2007, Wiesbaden, Germany, February 27-March 1 2007, pp. 372-380

Niinimäki J, Ämmälä A & Jokinen H (2007) Fractionation of fibres – possibilities and limits. PulPaper Conference, Helsinki, Finland, June 5-7th, 2007.

Rousu P & Niinimäki J (2007) Nonwood pulp constituents Part I – The effect on pulp and paper properties. Appita Journal 60(3), p. 217-221.

Rousu P & Niinimäki J (2007) Nonwood pulp constituents Part II – Combined use of Bauer McNett apparatus and optical analyzer. Appita Journal 60(3), p. 222-227.

Sarja T (2007) Measurement, nature and removal of stickies in deinked pulp. Acta Universitatis Ouluensis, Technica C 275, Oulu, Finland: University of Oulu, 2007, 133pp.

Sarja T, MacNeil D, Huber P & Niinimäki J (2007) Removal of stickies in flotation. Prog. Pap. Recycling 16(3):5-11.

Stoor T, Helle T & Niinimäki J (2007) Dissolution and precipitation of air into various pulp suspensions and white waters. Appita Journal 60(6):460-464.

Tiikkaja E (2007) Konenäköä soveltavan kuituanalysaattorin ja virtauskenttäfraktionaattorin mittausten yhteydet kuumahierteen paperiteknisiin ominaisuuksiin. Application of an optical fibre analyser and a tube flow fractionator to the estimation of quality potential of TMP (in Finnish) Acta Universitatis Ouluensis, Technica C 285, Oulu, Finland: University of Oulu, 2007, 139pp.

Vahlroos S, Körkkö M, Rosencrance S & Niinimäki J (2007) Comparsion of DIP Bleachability between Traditional Soap and Reduced Alkaline Chemistries. 8th Research Forum on Recycling, Tappi 2007, Niagara Falls, Canada, 23 – 26 September 2007

Yli-Viitala P, Jokinen H, Ämmälä A & Niinimäki J (2007) Hydrocyclone sand separation. Appita Journal 60(4):291-295

Last updated: 18.2.2019