Publications 2014

25 Tung N.P., Samikannu A., Kukkola J., Rautio A.-R.,  Pitkänen O., Dombovari A., Lorite G., Sipola T., Toth G., Mohl M., Mikkola, J.-P., and Kordas K., Industrially benign super-compressible piezoresistive carbon foams with predefined wetting properties: from environmental to electrical applications, Scientific Reports 4: Article Number 6933  (2014).  

24 Kähäri H., Teirikangas M., Juuti J., and Jantunen H., Dielectric properties of lithium molybdate ceramic fabricated at room temperature, Journal of the American Ceramic Society 97(11): 3378-3379   (2014).

23 Reinik J., Heinmaa I., Ritamäki J., Boström D., Pongrácz E., Huuhtanen M., Larsson W., Keiski, R., Kordás K., Mikkola J.-P., Direct CO2sequestration onto alkaline modified oil shale fly ash, Oil Shale 31(1): 79-90    (2014).

22 Namitha L.K., Ananthakumar S., and Sebastian M.T., Aluminum nitride filled flexible silicone rubber composites for microwave substrate applications, Journal of Materials Science: Materials in Electronics   8Nov 2014: 7p    (2014).

21 Rautiainen S., Simakova O., Guo H., Leino, A.-R., Kordás K., Murzin D., Leskelä M., and Repo T., Solvent controlled catalysis: Synthesis of aldehyde, acid or ester by selective oxidation of benzyl alcohol with gold nanoparticles on alumina, Applied Catalysis A: General 485(5): 202-206    (2014).

20 Riittonen T., Eränen K, Mäki-Arvela P, Shchukarev A, Rautio A.-R., Kordas K., Kumar N, Salmi T, and  Mikkola J.-P., Continuous liquid-phase valorization of bio-ethanol towards bio-butanol over metal modified alumina, Renewable Energy 74: 369-378    (2014).

19 Mamedov H.M., Konya Z., Muradov M.B., Kukovecz A. , Kordas, K., Hashim D.P., and Mamedov V.U., Preparation and investigation of p-GaAs/n-Cd1-xZnx1-yTey heterojunctions deposited by electrochemical deposition, Journal of Solar Energy Engineering, Transactions of the ASME 136(4):  Article number 044503      (2014).

18 Palosaari J., Leinonen M., Juuti J., Hannu J., and Jantunen H.,Piezoelectric circular diaphragm with mechanically induced pre-stress for energy harvesting,  Smart Materials and Structures 23(8):   Article Number: 085025       (2014).

17 Sridhar S., Tiwary C., Vinod S., Taha-Tijerina J.J., Sridhar S., Kalaga K., Sirota B., Hart A.H.C., Ozden S., Sinha R.K., Harsh R.K.S.H., Vajtai R., Choi W., Kordas K., and Ajayan P.M., Field Emission with Ultra low Turn On Voltage from Metal Decorated Carbon Nanotubes, ACS NANO 8:7763-7770     (2014).

16 Dunce M., Birks E., Peräntie J., Hagberg J., Antonova M., and Sternberg A., Phase Transitions and Electrocaloric Effect in Ca-Modified Na1/2Bi1/2TiO3-SrTiO3-PbTiO3 Solid Solutions, IEEE Transactions on Ultrasonics Ferroelectrics and Frequency Control (61)8: 1364-1367      (2014). 

15 Tyunina M., Pintilie I., Iuga A., Stratulat M.S., and Pintilie L., Frustration of ferroelectricity in epitaxial film of relaxor ferroelectric PbSc1/2Nb1/2O3, Journal of Physics-Condensed Matter  26(32):  Article Number: 325901     (2014). 

14 Sobocinski M., Leinonen M.,  Juuti J.,  Mäntyniemi N., and Jantunen H.,  A co-fired LTCC-PZT monomorph bridge type acceleration sensor, Sensors and Actuators A: Physical  216: 370-375      (2014). 

13 Putaala J., Salmela O., Nousiainen O., Kangasvieri T., Vähäkangas J., Uusimäki A., and Lappalainen J., Lifetime prediction and design aspects of reliable lead-free non-collapsible BGA joints in LTCC packages for RF/microwave telecommunication applications, Soldering & Surface Mount Technology 26(3): 117–128     (2014). 

12 Palukuru V. K., Lappalainen J., Puustinen J., Kangaspuoskari M., and Huotari J., Dielectric and Tunability Properties of Nanostructured Nd-modified Pb(ZrxTi1-x) O3 Thin Films up to Microwave Frequencies, Ferroelectrics 465(1): 20-27    (2014). 

11 Mäklin J., Halonen N., Pitkänen O., Toth G., and Kordás K., Solder transfer of carbon nanotube microfin coolers to ceramic chips, Applied Thermal Engineering 65(1-2): 539-543     (2014).  

10 Tyunina M., Pintilie I., Iuga A., and Pintilie L., Electric-field-induced transformations in epitaxial relaxor ferroelectric PbMg1/3Nb2/3O3 films,  Physical Review B 89(9):   Article Number: 094106   DOI: 10.1103/PhysRevB.89.094106    (2014). 

9 Tuhkala M., Juuti J., and Jantunen H., An indirectly coupled open-ended resonator applied to characterize dielectric properties of MgTiO3–CaTiO3 powders, Journal of Applied Physics 115: 184101   (2014). 

8 Mohl M., Dombovari A., Tuchina E.S., Petrov P.O., Bibikova O.A., Skovorodkin I., Popov A.P.,  Rautio A.-R., Sarkar A., Mikkola J.-P., Huuhtanen M., Vainio S., Kukovecz A., Konya Z., Tuchin   V.V., and Kordás K., Titania nanofibers in gypsum composites: an antibacterial and cytotoxicology study, Journal of Materials Chemistry B 2(10): 1307-1316    DOI: 10.1039/c3tb21644f    (2014).      

7 Tyunina M., Dejneka A., Rytz D., Gregora I., Borodavka F., Vondracek M., and Honolka J., Ferroelectricity in antiferroelectric NaNbO3 crystal, Journal of Physics: Condensed Matter 26(12):  Article Number: 125901    DOI: 10.1088/0953-8984/26/12/125901    (2014).  

6 Putaala J., Sobocinski M., Ruotsalainen S., Juuti J., Laakso P., and Jantunen H., Characterization of laser-sintered thick-film paste on polycarbonate substrates, Optics and Lasers in Engineering 56: 19-27 (2014).  

5 Putaala J., Hannu J., Kunnari E., Mäntysalo M., Nousiainen O., and Jantunen H., Reliability of SMD interconnections on flexible low-temperature substrates with inkjet-printed conductors, Microelectronics Reliability 54(1): 272-280    DOI: 10.1016/j.microrel.2013.08.021    (2014). 

4 Sridhar S., Ge L., Tiwary C. S., Hart A. C., Ozden S., Kalaga K., Lei S., Sridhar S. V., Sinha R. K., Harsh H., Kordás K., Ajayan P.M., and Vajtai R.,Enhanced Field Emission Properties from CNT Arrays Synthesized on Inconel Superalloy, ACS Applied Materials&Interfaces  6(3): 1986-1991    DOI: 10.1021/am405026y    (2014).     

3 Kirilin A.V., Hasse B., Tokarev A.V., Kustov L.M., Baeva G.N., Bragina G.O., Stakheev A.Y., Rautio A.-R., Salmi T., and Etzold B.J.M., Aqueous-phase reforming of xylitol over Pt/C and Pt/TiC-CDC catalysts: catalyst characterization and catalytic performance, Catalysis Science and Technology 4(2): 387-401    (2014). 

2 Lassi U., Hu T., Pohjalainen E., Kallio T, Kordás K., and Jantunen H.,Effect of a Surfactant Assisted Synthesis on the Electrochemical Performance of a LiFePO4-CNT Composite Electrode, International Journal of Material Science (IJMSCI) 4(1): 7 pages    DOI: 10.14355/ijmsci.2014.0401.01    (2014). 

1 Juntunen E., Tapaninen O., Sitomaniemi A., Jämsa M., Heikkinen V., Karppinen M., and Karioja P., Copper-Core MCPCB With Thermal Vias for High-Power COB LED Modules, IEEE Transactions on Power Electronics 29(3): 1410-1417    (2014).

Last updated: 24.1.2017