CASR's Publications

Recent journal and conference publications of CASR.

Journals

Title
2023

Aalipour Z, Zarei-Hanzaki A, Moshir A, Waryoba D, Kisko A, Karjalainen P & Abedi H
Dynamic and Postdynamic Recrystallization Behavior of GWZ Magnesium Alloy Under Double-Hit Hot
Compression. Advanced Engineering Materials. Adv. Eng. Mater. 2023, 2300297. DOI: 10.1002/adem.202300297
Afkhami s, Lipiäinen K, Javaheri V, Amraei M, Salminen A & Björk T
Effects of notch-load-defect interactions on the local stress-strain fields and strain hardening of additively manufactured 18Ni300 steel. – Materials Science and Engineering: A 876, 145165. https://doi.org/10.1016/j.msea.2023.145165.
Ahola A & Björk T
Fatigue strength assessment of welded joints in the marine environment - A case study on the applications of local stress and fracture mechanics methods for analyzing non-load-carrying fillet-welded joints. – Journal of Structural Mechanics 56, 41–50. http://dx.doi.org/10.23998/rm.124670.
Ahola A, Lipiäinen K, Riski J, Koskimäki M, Pyörret J & Björk T
Fatigue strength of shot-peened as-welded joints and post-weld-treated and subsequently clean-blasted fillet weld joints. – Welding in the World 67, 1559–1574. https://doi.org/10.1007/s40194-023-01498-3.
Ahola A, Lipiäinen K, Lindroos J, Koskimäki M, Laukia K & Björk T
On the fatigue strength of welded high-strength steel joints in the as-welded, post-weld-treated and repaired conditions in a typical ship structural detail. – Journal of Marine Science and Engineering 11(3), 644. http://dx.doi.org/10.3390/jmse11030644.
Airaksinen S, Laukka A, Heikkinen E-P, Riekki E & Fabritius T
From fossil-fueled to hydrogen-fueled annealing furnaces: effects on the oxidation of stainless steels. Steel research international, 94, 5, 2200305, DOI: 10.1002/srin.202200305.
Alatarvas T, Podor R, Heikkinen E-P, Shu Q & Singh H
Revealing the kinetics of non-metallic inclusion reactions in steel using in-situ high temperature environmental scanning electron microscopy. Materials & design, 232, 112139, DOI: 10.1016/j.matdes.2023.112139.
Ali M, Khosravifard A, Hamada A, Mattar T, Eissa M & Kömi J
Promotion of thermomechanical processing of 2-GPA low-alloyed ultrahigh-strength steel and physically based modelling of the deformation behaviour. Materials science and engineering a: structural materials properties microstructure and processing, 867, 144747 , DOI: 10.1016/j.msea.2023.144747.
Allam T, Ali M, Guo X, Ghosh S, Haase C, Jaskari M, Järvenpää A & Hamada A
Simultaneous enhancement of mechanical properties and resistance to hydrogen-assisted degradation by multiple precipitation and nano-twinning in medium manganese steel. Materials science and engineering a: structural materials properties microstructure and processing, 877, 145203, DOI: 10.1016/j.msea.2023.145203.
Babanejad S, Ahmed H, Andersson C & Heikkinen E-P
Mechanical activation-assisted recovery of valuable metals from black mass in the form of Fe/Cu alloys. Journal of Sustainable Metallurgy, 9, 522-536, DOI: 10.1007/s40831-023-00665-6.
Björk T, Ahola A, Skriko T & Lipiäinen K
On the backward design — an advanced concept for the design of welded structures for demanding applications. – Welding in the World 67, 1247–1257. https://doi.org/10.1007/s40194-023-01483-w.
Du J, Zhang Y, Lu J, Chen J, Gao L, Guo S, Omran M & Chen G
Mechanism of enhanced enrichment manganese from manganese orepyrite under microwave heating: process optimization and kinetic studies. Colloids and surfaces a: physicochemical and engineering aspects, 656, Part B, 130534, DOI: 10.1016/j.colsurfa.2022.130534.
Du J, Zhang Y, Lu J, Gao L, Guo S, Omran M, Chen J & Chen G
Microwave efficient extraction of manganese from low-grade pyrolusite by Pyrite reduction acid leaching process. Journal of Materials Research and Technology, 24, 2041-2052, DOI: 10.1016/j.jmrt.2023.03.134.
Elsadek M, Ahmed H, Suup M, Sand A, Heikkinen E, Khoshkhoo M & Sundqvist-Oqvist L
Recycling of pyrite and gypsum mining residues through thermochemical conversion into valuable products. Resources, Conservation and Recycling. Volume 199, December 2023, 107219.
Forouzan F, Surki Aliabad R, Hedayati A, Hosseini N, Maawad E, Blasco N & Vuorinen E
Kinetics of carbon enrichment in austenite during partitioning stage studied via in-situ synchrotron XRD. Materials, 16, 4, 1557, DOI: 10.3390/ma16041557.
Freschi M, Dragoni L, Mariani M, Haiko O, Kömi J, Lecis N & Dotelli G
Tuning the parameters of Cu-WS2 composite production via powder metallurgy: evaluation of the effects on tribological properties. Lubricants, 11, 2, 66, DOI: 10.3390/lubricants11020066.
Ghosh S, Rakha K, Aravindh Sasikala Devi A, Reza S, Pallaspuro S, Somani M, Huttula M & Kömi J
A combined 3D-atomic/nanoscale comprehension and Ab Intio computation of iron carbide structures tailored in Q & P steels via aSi alloying. Nanoscale, 15, Advance Article, 10004-10016, DOI: 10.1039/d3nr00816a.
Gui Y, Zhang Y, Lu J, Zhang F, Gao L, Chen J, Omran M & Chen G
Mixeowave drying method investigation for the process and kinetics of drying characteristics of zinc-leaching residue. Environmental science and pollution research, 30, 32, 79346-79362, DOI: 10.1007/s11356-023-27893-3.
Gyakwaa F, Alatarvas T, Shu Q & Fabritius T
Identifying oxide and CAS non-metallic inclusions in steel with Raman Spectroscopy. Metals, 13, 1, 43 , DOI: 10.3390/met13010043.
Freschi M, Dragoni L, Mariani M, Haiko O, Kömi J, Lecis N & Dotelli G
Tuning the parameters of Cu-WS2 composite production via powder metallurgy: evaluation of the effects on tribological properties. Lubricants, 11, 2, 66, DOI: 10.3390/lubricants11020066.
Haiko O, Valtonen K, Kaijalainen A, Javaheri V & Kömi J
High-stress abrasive wear characteristics of ultra-high strength press-hardening steel. Tribologia, 39, 3−4, 32-41, DOI: 10.30678/fjt.122836.
Haiko O, Pallaspuro S, Javaheri V, Kaikkonen P, Ghosh S, Valtonen K, Kaijalainen A & Kömi J
High-stress abrasive wear perhormance of medium-carbon direct-quenched and Partitioned, Carbide-free Bainitic, and Martensitic Steels. Wear, 526–527, 204925, DOI: 10.1016/j.wear.2023.204925.
Hamada A, Khosravifard A, Ghosh S, Jaskari M, Kreins M, Abd-Elaziem W, Wahba M, Ahmed E & Allam T
Enhancement of strength in laser-joined Al-trip and Si-trip steels: microstructural insights and deformation analysis. Materials science and engineering a: structural materials properties microstructure and processing, In Press, Journal Pre-proof, In Press, Journal Pre-proof, 145591, DOI: 10.1016/j.msea.2023.145591.
Hamada A, Khosravifard A, Ali M, Ghosh S, Jaskari M, Hietala M, Järvenpää A & Newishy M
Micromechanical analysis and finite element modelling of laser-welded 5-mm-thich dissimilar joints between 316L stainless steel and low-alloyed ultra-high-strength steel. Materials science and engineering a: structural materials properties microstructure and processing, 882, 145442, DOI: 10.1016/j.msea.2023.145442.
Huang W, Qiu H, Zhang Y, Zhang F, Gao L, Omran M & Chen G
Microstructure and phase transformation behavior of Al2O3-ZrO2 under microwave sintering. Ceramics international, 49, 3 , 4855-4862, DOI: 10.1016/j.ceramint.2022.09.376.
Huang W, Zhang Y, Lu J, Chen J, Gao L, Omran M & Chen G
Microwave drying method investigation for the process and kinetics of drying characterristics of high-grade rutile TiO2. Ceramics international, 49, 10, 15618-15628 DOI: 10.1016/j.ceramint.2023.01.152.
Huang W, Lu J, Zhang Y, Omran M, Gao L, Chen J & Chen G
Research on the tetragonal phase content and microstructure of microwave-assisted sintering Y-PSZ system doped Bi2O3. Journal of Materials Research and Technology, 23, 2136-2146, DOI: 10.1016/j.jmrt.2023.01.157.
Huang W, Zhang Y, Lu J, Gao L, Zhang F, Chen J, Omran M & Chen G
Effect of sintering time on the microstructure and stability of Al2O3ZrO2 composite powders under microwave-assisted sintering. Ceramics international, 49, 6, 8993-8999, DOI: 10.1016/j.ceramint.2022.11.054.
Javaheri V, Pallaspuro S, Sadeghpour S, Ghosh S, Sainio J, Latypova R & Kömi J
Rapid tempering of a medium-carbon martensitic steel: in-depth exploration of the microstructure-mechanical property evolution. Materials & design, 231, 112059, DOI: 10.1016/j.matdes.2023.112059.
Ikäheimo V, Marjakoski M, Vaajamo I & Visuri V-V
Metallurgijaosten kevätseminaari 2023. Materia, 81, 3 ,71-72.
Jiang Q, Bertolo V, Pallaspuro S, Popovich V, Sietsma J, Walters C
Microstructure-based cleavarge parameters in bainitic, martensitic, and ferritic steels. Engineering fracture mechanics, 281, 109146, DOI: 10.1016/j.engfracmech.2023.109146.
Kaikkonen P, Ghosh S, Somani M & Kömi J
Nanostructured bainite transformation characteristics in medium-carbon steel subjected to ausforming and isothermal holding below martensite start temperature. Journal of Materials Research and Technology, 23, 466-490, DOI: 10.1016/j.jmrt.2023.01.002.
Karjalainen P, Javaheri V, Fabritius T, Huttula M & Kömi J
Green steel for a green planet. Steel Times International. Feature Paper. Digital Edition - June 2023 - No.26.
Khajesarvi A, Banadkouki S, Sajjadi S & Somani M
Abnormal trend of ferrite hardening in a medium-Si Ferrite-Martensite dual phase steel. Metals, 13, 3, 542, DOI: 10.3390/met13030542.
Khedr M, Hamada A, Abd-Elaziem W, Jaskari M, Elsamanty M, Kömi J & Järvenpää A Effects of wall thickness variation on hydrogen embrittlement susceptibility of additively manufactured 316L stainless steel with lattice auxetic structures. Materials, 16, 6, 2523, DOI: 10.3390/ma16062523.
Khedr M, Ibrahim I, Jaskari M, Ali M, Abdel-Aleem H, Mahmoud T & Hamada A
Microstructural evolution and mechanical performance of two joints of medium-Mn stainless steel with low- and high-alloyed steels. Materials, 16, 4, 1624, DOI: 10.3390/ma16041624.
Kisko A, Kaijalainen A, Kurtti L, Kodukula S & Ylimainen T
The effect of hot rolling and coiling temperature on microstructure and texture of ferritic stainless steel. La Metallurgia Italiana, 7-8, 16-23.
Kärkkäinen K, Vaara J, Väntänen M, Niskanen I & Frondelius T
The role of plasticity-induced crack closure in the non-propagation prediction of surface detect-initiated cracks near fatigue limit. International journal of fatigue, 168, 107462, DOI: 10.1016/j.ijfatigue.2022.107462.
Latypova R, Nyo T, Seppälä O, Hahtonen K, Hänninen H, Kömi J & Pallaspuro S
The effect of Pd and Ni coatings on hydrogen permeation experiments of As-quenched martensitic steel. Corrosion reviews, in press, 0, 1-8, DOI: 10.1515/corrrev-2022-0118.
Latypova R, Seppälä O, Tun Nyo T, Kauppi T, Mehtonen S, Hänninen H, Kömi J & Pallaspuro S
Influence of prior austenite grain structure on hydrogen-induced fracture in As-quenched Martensitic Steels. Engineering fracture mechanics, 281, 109090, DOI: 10.1016/j.engfracmech.2023.
Li Y, Ren J, Wei H, Khan I, Omran M, Fabritius T, Shu Q, Wang C, Zang Y & Yu Y
Reduction kinetics of cold-bonded briquette prepared from return fines of sinter with carbon monoxide and coke. Steel research international, 94, 8, 2300057, DOI: 10.1002/srin.202300057.
Lu J, Zhang Y, Huang W, Omran M, Zhang F, Gao L & Chen G
Reductive roasting of cathode powder of spent ternary lithium-ion battery by pyrolysis of invasive plant crofton weed. Renewable energy, 206, 86-96, DOI: 10.1016/j.renene.2023.02.005.
Luukkonen J, Pohjonen A, Louhenkilpi S, Miettinen J, Sillanpää M & Laitinen E
Gradient boosted regression trees for modelling onset of austenite decomposition during cooling of steels. Metallurgical and materials transactions b: process metallurgy and materials processing science, 54, 4, 1705-1724, DOI: 10.1007/s11663-023-02782-9.
Mauret F, Baniasadi M, Saxén H, Hojda S & Rullang F
“Numerical investigation of hydrogenous gases injection impact on the blast furnace process”, Metallurgical and Materials Transactions B 54 (2023) 2137-2158.
Mei X, Zhao Q, Min Y, Liu C, Shi P, Saxén H & Zevenhoven R
“Dissolution behavior of steelmaking slag for Ca extraction towards CO2 sequestration”, Journal of Environmental Chemical Engineering 11 (2023) 110043.
Mitas B, Visuri V-V & Schenk J
Modeling the residence time of metal droplets in slag during BOF. Metallurgical and materials transactions b: process metallurgy and materials processing science, 54, 4 ,1938-1953, DOI: 10.1007/s11663-023-02808-2.
Mäkelä I, Visuri V-V & Fabritius T
A mathematical model for the thermal state of a steel ladle. Ironmaking and steelmaking, 50, 7, 867-877, DOI: 10.1080/03019233.2023.2201544.
Neuvonen R, Peltoniemi T, Skriko T, Ghafouri M, Amraei M, Ahola A, Björk T
The effects of geometric and metallurgical constraints on ultra-high strength steel weldments. – Structures 56, 104900. http://dx.doi.org/10.1016/j.istruc.2023.104900.
Norrena J, Louhenkilpi S, Visuri V-V, Alatarvas T, Bogdanoff A & Fabritius T
Assessing the effects of steel composition on surface cracks in continuous casting with solidification simulations and phenomenological quality criteria for quality prediction applications. Steel research international, 94, 5, 2200746, DOI: 10.1002/srin.202200746.
Nousiainen O, Hannula J, Saukko S, Kaijalainen A & Kömi J
Precipitation behavior of novel 1 GPA ferritic advanced high strength steels. Materials characterization, 201, 112944, DOI: 10.1016/j.matchar.2023.112944.
Patnamsetty M, Ghosh S, Somani M & Peura P
Dynamic softening kinetics of ALO.3Cocrfeni high-entropy alloy during high temperature compresison and its correlation with the evolving microstructure and micro-texture. Materials characterization, 197, 112693, DOI: 10.1016/j.matchar.2023.112693.
Piekkari K, Isteri V, Ohenoja K & Illikainen M
Hazardous industrial filter sludge immobilization with mayenite and gypsum. Journal of cleaner production, 387, 1-9, 135873, DOI: 10.1016/j.jclepro.2023.135873.
Pohjonen A, Ilmola J, Seppälä O & Leinonen O
Numerical modeling of thermo-mechanical processes in steels – an overview and recent progress. Materials science forum, 1093, 13-20, DOI: 10.4028/p-jI0HPT.
Pohjonen A
Full field model describing phase front propagation, transformation strains, chemical partitioning, and diffusion in solid-solid phase transformations. Advanced theory and simulations, 6, 3, 2200771, DOI: 10.1002/adts.202200771.
Pylvänäinen M, Nissilä J, Visuri V-V, Laurila J, Niemi A, Tuomikoski S, Paananen T & Liedes T
Effect of gas forming compounds on the vibration of a submerged lance in hot metal desulfurization. Steel research international, Early View, 2300072, DOI: 10.1002/srin.202300072.
Qiu H, Zhang Y, Huang W, Peng J, Chen J, Gao L, Omran M, Li N & Chen G
Sintering properties of tetragonal Zirconia Nanopowder preparation of the NACL + KCL Binary System by the SOL-GEL-FLUX Method. Acs sustainable chemistry and engineering, 11, 3, 1067-1077, DOI: 10.1021/acssuschemeng.2c05908
Riaz T, Shyamal S., Shee S, Karjalainen P & Sahu P
X-ray line profile analysis on the deterformation microstructure of Al-bearing high-Mn steels. Materials characterization, 196, 112567, DOI: 10.1016/j.matchar.2022.112567.
Riski J, Ahola A, Skriko T, Björk T
Low-cycle fatigue in ultra-high-strength steel welded joints in the as-welded and post-weld-treated conditions. – Advances in Structural Engineering. http://dx.doi.org/10.1177/13694332231178977.
Rohani Raftar H, Ahola A, Lipiäinen K, Björk T
Simulation and experiment on residual stress and deflection of cruciform welded joints. – Journal of Constructional Steel Research 208, 108023. https://doi.org/10.1016/j.jcsr.2023.108023.
Seppälä O, Pohjonen A, Mendonça J, Javaheri V, Podor R, Singh H & Larkiola J
In-situ sem characterization and numerical modelling of bainite formation and Impingement of a medium-carbon, low-alloy steel. Materials & design, 230, 111956, DOI: 10.1016/j.matdes.2023.111956.
Shao L, Xu J, Saxén H & Zou Z-S
“A numerical study on process intensification of hydrogen reduction of iron oxide pellets in a shaft furnace”, Fuel 348 (2023) 128375.
Shu Q, Li J & Yan B
Editorial: Fluxes and Steel Quality. Frontiers in materials, 10, 1145618 , DOI: 10.3389/fmats.2023.1145618.
Sohrabi M, Mirzadeh H, Sadeghpour S & Mahmudi R
Explaining the drop of work-hardening rate and limitation of transformation-induced plasticity effect in metastable stainless steel during tensile deformation. Materialia, 231, 115465 , DOI: 10.1016/j.scriptamat.2023.115465.
Sohrabi M, Mirzadeh H, Sadeghpour S & Mahmudi R
Dependency of work-hardening behavior of a metastable austenitic stainless steel on the nucleation site of deformation-induced martensite. Materials science and engineering a: structural materials properties microstructure and processing, 868, 144600, DOI: 10.1016/j.msea.2023.144600.
Sohrabi M, Mirzadeh H, Sadeghpour S & Mahmudi R
Grain size dependent mechanical behavior and trip effect in a metastable austenitic stainless steel. International journal of plasticity, 160, 103502, DOI: 10.1016/j.ijplas.2022.103502.
Sohrabi M, Mirzadeh H, Sadeghpour S, Geranmayeh A & Mahmudi R
Tailoring the strength-ductility balance of a commercial austenitic stainless steel with combined twip and trip effects. Archives of civil and mechanical engineering, 23, 170 (2023) , DOI: 10.1007/s43452-023-00718-3.
Tahaghoghi M, Zarei-Hanzaki A, Mirshekari B, Moshiri A, Jaskari M, Karjalainen P & Abedi H
The Outstanding Contribution of Basal Slip in Substructure Development during Friction Stir Processing
of Magnesium Alloys. Advanced Engineering Materials. 2023, 25, 2300650. https://doi.org/10.1002/adem.202300650.
Tian C, Zhou J, Ren C, Omran M, Zhang F & Tang J
Drying kinetics of microwave-assisted drying of leaching residues from hydrometallurgy of zinc. Materials, 16, 16, 5546, DOI: 10.3390/ma16165546.
Vaara J, Väntänen M, Laine J, Kemppainen J & Frondelius T
Prediction of the fatigue limit defining mechanism of nodular cast iron based on statistical microstructural features. Engineering fracture mechanics, 277, 109004, DOI: 10.1016/j.engfracmech.2022.109004.
Vuolio T, Visuri V-V, Sorsa A, Paananen T, Tuomikoski S & Fabritius T
Machine learning assisted identification of grey-box hot metal desulfurization model. Materials and manufacturing processes, Online first, 1-14, DOI: 10.1080/10426914.2023.2195916.
Wan X, Shi C, Huang Y, Shu Q & Zhao Y
Effect of SiO2 and BaO/CaO mass ratio on structure and viscosity of B2O3-containing CaF2-CaO-Al2O3-based slag for electroslag remelting of rotor steel. Metallurgical and materials transactions b: process metallurgy and materials processing science, 54, 1, 465-479, DOI: 10.1007/s11663-022-02706-z.
Wei H, Saxén H & Yu Y
“Numerical analysis of factors affecting the burden surface and porosity distribution in the upper part of the blast furnace”, Metals 13 (2023) 292.
Wei H, Mondal D, Saxén H & Yu Y
“Numerical investigation of the radial ore-to-coke ratio in the blast furnace throat at non-uniform burden descent”, Steel research international 94 (2023) 2200290.
Wen Y, Shu Q, Lin Y & Fabritius T
Effect of SiO2 content and mass ratio of CaO to Al2O3 on the viscosity and structure of CaO-Al2O3-B2O3-SiO2 slags. Isij international, 63, 1, 1-9, DOI: 10.2355/isijinternational.ISIJINT-2022-288.
Zarei Z, Zohrevand M, Momeni A, Sadeghpour S & Somani M
Effect of heat treatment regime on microstrucuture and phase Eevolution of AlMo0.5NbTa0.5TiZr refractory high entropy alloy. Journal of alloys and compounds, 949, 169818, DOI: 10.1016/j.jallcom.2023.169818.
Zhang Y, Tian C, Ren C, Tang J, Gao L, Omran M & Chen G
The effect of mechanical activation duration on the structure and physical properties of titanium slag. Materials today communications, 35, 106200, DOI: 10.1016/j.mtcomm.2023.106200.
Zhang Y, Lu J, Huang W, Gao L, Zhang F, Omran M & Chen G
Ball milling assisted preparation of NANO La-Y/ZrO2 powder ternary oxide system: influence of doping amounts. Ceramics international, 49, 7, 10375-10383, DOI: 10.1016/j.ceramint.2022.11.218.
Zhao Z, Saxén H, Liu Y, She X & Xue Q
“Numerical study on the Influence of Pellet Proportion on Burden Distribution in Blast Furnace”, Ironmaking and Steelmaking 50 (2023) 613-620.
Zhao Q, Li W, Qiu J, Liu C, Jiang M, Saxén H & Zevenhoven R
“Preparation of anode material of lithium-ion battery by spent pickling liquor”, Journal of Sustainable Metallurgy 9 (2023) 148-159.
Zhou J, Cao W, Zhang Y, Omran M, Chen G, Gao L, Zhang F & Tang J
Effect of microwave drying technology on drying kinetics of Al2O3-ZrO2 composite ceramic powder. Journal of Materials Research and Technology, 24, 6762-6778, DOI: 10.1016/j.jmrt.2023.04.229.

Title
2022

Aalipour Z, Zarei-Hanzaki A, Moshiri A, Kisko A & Karjalainen P
Strain dependency of dynamic recrystallization during thermomechanical processing of Mg-Gd-Y-Zn-Zr alloy. - Journal of Materials Research and Technology 18, 591–598.
https://doi.org/10.1016/j.jmrt.2022.02.120
Abdelrahim A, Aula M, Iljana M, Willms T, Echterhof T, Steinlechner S, Mombelli D, Mapelli C, Omran M, Preiss Stefan & Fabritius T
Suitability of Self-Reducing and Slag-Forming Briquettes for Electric Arc Furnace Use Based on Laboratory Tests. - Steel research international 93 (2), 2100472 . https://doi.org/10.1002/srin.202100472
Abdelrahim A, Nguyen H, Omran M, Kinnunen P, Iljana M, Illikainen M & Fabritius T Development of Cold-Bonded Briquettes using By-Product-Based Ettringite Bindere from Ladle Slag. Journal of Sustainable Metallurgy, 8, 1 , 468-487, DOI: 10.1007/s40831-022-00511-1.
Afkhami S, Javaheri V, Amraei M, Skriko T, Piili H, Zhao X-L & Björk T
Thermomechanical Simulation of the Heat-Affected Zones in Welded Ultra-High Strength Steels: Microstructure and Mechanical Properties. - Materials & design 213, 110336 . https://doi.org/10.1016/j.matdes.2021.110336
Afkhami A, Javaheri V, Lipiäinen K, Amraei M, Dabiri E & Björk T
Fatigue Performance of Stainless Tool Steel CX Processed by Laser Powder Bed Fusion. – Materials Science and Engineering A: 841, 143031. https://doi.org/10.1016/j.msea.2022.143031
Afkhami S, Javaheri V, Dabiri E, Piili H & Björk T
Effects of Manufacturing Parameters, Heat Treatment, and Machining on the Physical and Mechanical Properties of 13Cr10Ni1·7Mo2Al0·4Mn0·4Si Steel Processed by Laser Powder Bed Fusion. - Materials Science and Engineering A: 832, 142402. https://doi.org/10.1016/j.msea.2021.142402
Afkhami A, Javaheri V, Dabiri E, Piili H & Björk T
Data Related to the Microstructural Identification and Analyzing the Mechanical Properties of Maraging Stainless Steel 13Cr10Ni1.7Mo2Al0.4Mn0.4Si (commercially known as CX) Processed by Laser Powder Bed Fusion Method. – Data in Brief 41, 107856. https://doi.org/10.1016/j.dib.2022.107856
Afkhami S, Javaheri V, Amraei M, Skriko T, Piili H, Zhao X-L & Björk T
Thermomechanical Simulation of the Heat-Affected Zones in Welded Ultra-High Strength Steels: Microstructure and Mechanical Properties. Materials & design, 213, 110336, DOI: 10.1016/j.matdes.2021.110336.
Afkhami S, Amraei M, Poutiainen I, Gardner L, Piili H, Wadee M A, Salminen A & Björk T
Data related to the manufacturing and mechanical performance of 3D-printed metal honeycombs. – Data in Brief 46, 108857. http://dx.doi.org/10.1016/j.dib.2022.108857.
Afkhami S, Amraei M, Poutiainen I, Gardner L, Piili H, Wadee M A, Salminen A & Björk T
Mechanical performance and design optimisation of metal honeycombs fabricated by laser powder bed fusion. – Thin-Walled Structures 180, 109864. http://dx.doi.org/10.1016/j.tws.2022.109864.
Ahola A, Lipiäinen K, Afkhami S, Lilja H & Björk T
Fatigue Performance of the Welded Details of an Old, Demolished Steel Railway Bridge. – Engineering Structures 256, 113966. http://dx.doi.org/10.1016/j.engstruct.2022.113966
Ahola A, Rohani Raftar H, Björk T & Kukkonen O
On the Interaction of Axial and Bending Loads in the Weld Root Fatigue Strength Assessment of Load-Carrying Cruciform Joints. – Welding in the World 66, 731–744. http://dx.doi.org/10.1007/s40194-021-01237-6
Ahola A, Afkhami S, Lipiäinen K & Björk T
Ultimate capacity of SHS X-joints made of normal and high-strength weathering steels. – Journal of Constructional Steel Research 198, 107533. http://dx.doi.org/10.1016/j.jcsr.2022.107533.
Airaksinen S, Tuovinen T, Vuolio T, Laukka A, Heikkinen E-P, Riekki E & Fabritius T
Oxide Scale Formation of EN 1.4622 and EN 1.4828 Stainless Steels During Annealing and Descaling Behavior in Neutral Electrolytic Pickling. - Steel Research International 93 (1), 2100366. https://doi.org/10.1002/srin.202100366
Ali M, Seppälä O, Fabritius T & Kömi J
Microstructure Evolution and Static Recrystallization Kinetics in Hot-Deformed Austenite of Coarse-Grained Mo-Free and Mo Containing Low-Carbon Crnimnb Ultrahigh-Strength Steels. Materials today communications, 33, 104676, DOI: 10.1016/j.mtcomm.2022.104676.
Alzaza A, Ohenoja K, Isteri V, Hanein T, Geddes D, Poikelispää M & Illikainen M Blending
Eco-Efficient Calcium Sulfoaluminate Belite Ferrite Cement to Enhance the Physico-Mechanical Properties of Portland Cement Paste Cured in Refrigerated and Natural Winter Conditions. Cement and concrete composites, 129, 104469, DOI: 10.1016/j.cemconcomp.2022.104469.
Barati R, Mohammad H, Ghiasabadi F, Mehrdad A, Mahdi K, Jeoung H, Karjalainen P & Sahu P
Analysis of Strain Hardening Behavior of a High-Mn Twip Steel Using Electron Microscopy and Cyclic Stress Relaxation. Acta materialia, 240, 118309, DOI: 10.1016/j.actamat.2022.118309.
Cam G, Javaheri V & Heidarzadeh A
Advanced in FSW and FSSW of Dissimilar Al-Alloy Plates. Journal of adhesion science and technology, 37, 2, 162-194, DOI: 10.1080/01694243.2022.2028073
Chen J, Gao L, Guo S, Omran M & Chen Guo
Evaluation of the Structure and Valence State of Titanium Oxide in Titania Slag Under Microwave Heating. - Materials Letters 310, 131475. https://doi.org/10.1016/j.matlet.2021.131475
Chen J, Jiang Q, Li K, Omran M, Gao L & Chen G
The Productive Preparation of Synthetic Rutile from Titanium Slag via an Improved Microwave Heating and Acid-Alkali Joint Leaching Approach. - Chemical Engineering and Processing 172, 108773 . https://doi.org/10.1016/j.cep.2021.108773
Chen J, Peng J, He A, Gao L, Omran M & Chen G
Investigation on the Decomposition of Titanium Slag Using Sodium Carbonate for Preparing Rutile TiO2. Materials chemistry and physics, 290, 126626, DOI: 10.1016/j.matchemphys.2022.126626.
Chen J, Guo S, Omran M, Gao L, Zheng H & Chen G
Microwave-Assisted Preparation of Nanocluster Rutile TiO2 from Titanium Slag by Naoh-Koh Mixture Activation. Advanced powder technology, 33, 5, 103549, DOI: 10.1016/j.apt.2022.103549.
Chen J, He F, Gao L, Guo S, Omran M & Chen G
Rapid Preparation of Manganese Monoxide by Microwave-Enhanced Selective Carbothermal Reduction. Frontiers in energy research, 10, 845303, DOI: 10.3389/fenrg.2022.845303.
Chen H, Ding W, Wei H, Li L, Saxén H & Yu Y
“A Coupled CFD-DEM Study on the Effect of Basset Force Aimed at the Motion of Single Bubble”, Materials 15 (2022) 5461.
Chen H, Li Y, Xiong H, Wei H, Saxén H & Yu Y
“Effect of particle holdup on bubble formation in suspension medium by VOF-DPM simulation, Granular Matter 24 (2022) 120.
Chen H, Li Y, Xiong Y, Wei H, Saxén H & Yu Y
“Effect of particle holdup on bubble formation in suspension medium by VOF-DPM simulation, Granular Matter 24 (2022) 120.
Das S, Shyamal S, Jaskari M, (...), Karjalainen P & Sahu P
Transmission electron microscopy investigations on the twinning suppression attributes in a Fe-Mn-Al-C steel and the associated strain hardening, Materials Letters 324, 132730.
Ding W, Qi B, Chen H, Li Y, Xiong Y, Saxén H & Yu Y
“Numerical simulation of bubble and velocity distribution in a furnace”, Metals 12 (2022) 844.
Echterhof T, Ohno K-I & Visuri V-V
Modeling and Simulation of Metallurgical Processes in Ironmaking and Steelmaking. Metals, 12, 7, 1185, DOI: 10.3390/met12071185.
Fangnon E, Malitckii E, Latypova R & Vilaca P
Prediction of Hydrogen Concentration Responsible for Hydrogen-induced Mechanical Failure in Martensitic High-strength Steels. International journal of hydrogen energy, in press, DOI: 10.1016/j.ijhydene.2022.11.151.
Freschi M, Di Virgilio M, Haiko O, Mariani M, Andena L, Lecis N, Kömi J & Dotelli G
Investigation of Second Phase Concentration Effects on Tribological and Electrical Properties of Cu-WS2 Composites. - Tribology International 166, 107357. http://dx.doi.org/10.1016/j.triboint.2021.107357
Freschi M, Arrigoni A, Haiko O, Andena L, Kömi J, Castiglioni C & Dotelli G
Physico-Mechanical Properties of Metal Matrix Self-Lubricating Composites Reinforced with Traditional and Nanometric Particles. Lubricants, 10, 3, 35, DOI: 10.3390/lubricants10030035.
Frondelius T, Kaarakka T, Kouhia R, Mäkinen J, Orelma H & Vaara J
Stochastic Continuum Approach to High-Cycle Fatigue: Modelling Stress History as a Stochastic Process. European journal of mechanics a: solids, 92, 104454, DOI: 10.1016/j.euromechsol.2021.104454.
Ghafouri M, Ahola A, Ahn J & Björk T
Welding-Induced Stresses and Distortion in High-Strength Steel T-joints: Numerical and Experimental Study. – Journal of Constructional Steel Research 189, 107088. http://dx.doi.org/10.1016/j.jcsr.2021.107088
Ghafouri M, Ahola A, Ahn J & Björk T
Numerical and Experimental Investigations on the Welding Residual Stresses and Distortions of the Short Fillet Welds in High Strength Steel Plates. – Engineering Structures 260, 114269. https://doi.org/10.1016/j.engstruct.2022.114269
Ghafouri M, Amraei M, Pokka A-P, Björk T, Larkiola J, Piili H & Zhao X-L
Mechanical Preperties of Butt-Welded Ultra-High Strength Steels at Elevated Temperatures. Journal of constructional steel research, 198, 107499, DOI: 10.1016/j.jcsr.2022.107499.
Ghafouri M, Amraei M, Pokka A-P, Björk T, Larkiola J, Piili H, Zhao X-L
Mechanical properties of butt-welded ultra-high strength steels at elevated temperatures. – Journal of Constructional Steel Research 198, 107499. http://dx.doi.org/10.1016/j.jcsr.2022.107499.
Ghiasabadi Farahani M, Kim J, Jaskari M, Karjalainen P & Sahu P
Newer insights into the discrimination of pole mechanisms of twinning in a face-centered cubic high-Mn steel. - Materialia 21, 101349. https://doi.org/10.1016/j.mtla.2022.101349
Ghosh S, Rakha K, Reza S, Somani M & Kömi J
Atomic Scale Characterization of Carbon Partitioning and Transition Carbide Precipitation in a Medium Carbon Steel During Quenchiing and Partitioning Process. Materials today: proceedings, 62, SI part 14, 7570-7573, DOI: 10.1016/j.matpr.2022.04.649.
Ghosh S, Hamada A, Patnamsetty M, Borek W, Gouda M, Chiba A & Ebied S
Constitutive Modeling and Hot Deformation Processing Map of a New Biomaterial Ti-14Cr Alloy. Journal of Materials Research and Technology, 20, 4097-4113, DOI: 10.1016/j.jmrt.2022.08.160.
Ghosh S, Kaikkonen P, Javaheri V, Kaijalainen A, Miettunen I, Somani M, Kömi J & Pallaspuro S
Design of Though, Ductile Direct Quenched and Partitioned Advanced High-Strength Steel with Tailored Silicon Conten. Journal of Materials Research and Technology, 17, 1390-1407, DOI: 10.1016/j.jmrt.2022.01.073.
Ghosh S, Wang S, Singh H, King G, Xiong Y, Zhou T, Huttula M, Kömi J & Cao W
Quantitative Prediction of Yield Stregth of Highly Alloyed Complex Steel Using High Energy Synchrotron X-Ray Diffratometry. Journal of Materials Research and Technology, 20, 485-495, DOI: 10.1016/j.jmrt.2022.07.066.
Gupta A. Aula M, Sreenivasan H, Mäkelä P, Huttula M & Fabritius T
Study of Synthetic Titania Slags Demonstrating Characteristics Similar to High Titania Ilmenite Slag. Minerals, 12, 3, 386, DOI: 10.3390/min12030386.
Hamada A, Ali M, Ghosh S, Jaskari M, Keskitalo M & Järvenpää A
Mechanical Performance and Formability of Laser-Welded Dissimilar Butt Joints Between Medium-Mn Stainless Steel and High-Strength Carbon Steel. - Materials Science and Engineering A: 831, 142200. https://doi.org/10.1016/j.msea.2021.142200
Hamada A, Khosravifard A, Ghosh S, Järvenpää A & Karjalainen P
High-speed erichsen testing of grain-refined 301LN austenitic stainless steel processed by double-reversion annealing. - Metallurgical and Materials Transactions A 53(6), 2174-2194. https://doi.org/10.1007/s11661-022-06659-5
Hamada A, Ghosh S, Ali M, Jaskari M & Järvenpää A
Studying the Strengthening Mechanisms and Mechanical Properties of Dissimilar Laser-Welded Butt Joints of Medium-Mn Stainless Steel and Automotive High-Strength Carbon Steel. Materials science and engineering a: structural materials properties microstructure and processing, 856, 143936, DOI: 10.1016/j.msea.2022.143936.
Hammam A, Nasr M, El-Sadek M, Omran M, Ahmed A, Li Y, Xiong Y & Yu Y
Comparative Study on the Isothermal Reduction Kinetics of Iron Oxide Pellet Fines with Carbon-Bearing Materials. Sustainability, 14, 14 , 8647, DOI: 10.3390/su14148647.
Hao X, Yang M, Huang W, Zhang F, Gao L, Omran M & Chen G
Study on Drying Kinetics of Calcium Oxide Doped Zirconia by Microwave-Assisted Drying. Ceramics international, 48, 20 , 30430-30440, DOI: 10.1016/j.ceramint.2022.06.321.
Helle M, Saxén H, de Graaff B & van der Bent C
Wear-Model-Based Analysis of the State of Blast Furnace Hearth. - Metallurgical and Materials Transactions B: Process Metallurgy and Materials Processing Science, 53(1), 594–603.
Huang W, Zhang Y, Qiu H, Huang J, Chen J, Gao L, Omran M & Chen G
Drying Characteristics of Ammonium Polyvanadate under Microwave Heating Based on a Thing-Layer Drying Kinetics Fitting Model. Journal of Materials Research and Technology, 19, 1497-1509, DOI: 10.1016/j.jmrt.2022.05.127.
Huang W, Qiu H, Zhang Y, Nan L, Gao L, Chen J, Omran M & Chen G
Preparation of Nano Zirconia by Binary Doping: Effect of Controlled Sintering on Structure and Phase Transformation. Ceramics international, 48, 17, 25374-25381, DOI: 10.1016/j.ceramint.2022.05.211.
Iljana M, Paananen T, Mattila O, Kondrakov M & Fabritius T
Effect of Iron Ore Pellet Size on Metallurgical Properties. Metals, 12, 2, 302 , DOI: 10.3390/met12020302.
Iljana M, Abdelrahim A, Bartusch H & Fabritius T
Reduction of Acid Iron Ore Pellets under Simulated Wall and Center Conditions in a Blast Furnace Shaft. Minerals, 12, 6, 741, DOI: 10.3390/min12060741.
Isteri V, Ohenoja K, Hanein T, Kinoshita H, Kletti H, Rößler C, Tanskanen P, Illikainen M & Fabritius T
Ferritic Calcium Sulfoaluminate Belite Cement from Metallurgical Industry Residues and Phosphogypsum: Clinker Production, Scale-Up, and Microstructural Characterisation. - Cement and Concrete Research 154, 106715, 106715. https://doi.org/10.1016/j.cemconres.2022.106715
Javaheri V, Sadeghpour S, Karjalainen P, (...), Laukkanen A & Kömi J
Formation of nanostructured surface layer, the white layer, through solid particles impingement during slurry erosion in a martensitic medium-carbon steel. - Wear 496-497, 204301. https://doi.org/10.1016/j.wear.2022.204301
Kaikkonen P, Somani M, Pohjonen A, Javaheri V & Kömi J
Evaluation of a Processing Route and Microstructural Characteristics for the Development of Ultrafine Bainite in Low-temperature Ausformed Medium-carbon Steels. Journal of materials engineering and performance, online first, 1-12, DOI: 10.1007/s11665-022-07686-4.
Kallio R, Lassi U, Kauppinen T, Holappa E, Christophliemk M, Luukkanen S, Tanskanen P & Fabritius T
Leaching Characteristics of Sc-Enriched, Fe-Depleted Acidics Slags. Minerals engineering, 189, 107901, DOI: 10.1016/j.mineng.2022.107901.
Kallio R, Tanskanen P, Heikkinen E-P, Kokkonen T, Luukkanen S & Fabritius T
Reduction Characteristics of Kiviniemi Ferrous Scandium Concentrate. Minerals engineering, 177, 107369, DOI: 10.1016/j.mineng.2021.107369.
Kallio R, Tanskanen P, Heikkinen E-P, Kokkonen T, Luukkanen S & Fabritius T
Slag Modification in Reduction of Kiviniemi Ferrous Scandium Concentrates. Metals, 12, 5, 709, DOI: 10.3390/met12050709.
Kantanen P, Anttila S, Karjalainen P, Latypova R, Somani M, Kaijalainen A & Kömi J
Microstructures and Mechanical Properties of Three Medium-Mn Steels Processed via Quenching and Partitioning as Well as Austenite Reversion Heat Treatments. Materials science and engineering a: structural materials properties microstructure and processing, 847, 143341, DOI: 10.1016/j.msea.2022.143341.
Keränen L, Nousiainen O, Javaheri V, Kaijalainen A, Pokka A-P, Keskitalo Ma, Niskanen J & Kurvinen E
Mechanical Properties of Welded Ultrahigh-Strength S960 Steel at Low and Elevated Temperatures. Journal of constructional steel research, 198, 107517, DOI: 10.1016/j.jcsr.2022.107517.
Kistanov A, Rani E, Singh H, Fabritius T, Huttula M & Cao W
Discerning Phase-Matrices for Individual Nitride Inclusions Within Ultra-High-Strength Steel: Experiment Driven DFT Investigation. - Physical Chemistry Chemical Physics 24 (3), 1456-1461. https://doi.org/10.1039/D1CP05068K
Koskela A, Suopajärvi H, Gornostayev S, Uusitalo J & Fabritius T
Improvement of Coke Strength by HDPE Addition. International journal of coal preparation and utilization, latest articles, latest articles , DOI: 10.1080/19392699.2022.2066088.
Koskela A, Suopajärvi H & Fabritius T
Interaction Between Coal and Lignin Briquettes in Co-Carbonization. Fuel, 324, 124823, DOI: 10.1016/j.fuel.2022.124823.
Kumar G, Ghosh S, Pallaspuro S, Somani M, Kömi J, Mishra S & Gokhale A
Fracture Toughness Characteristics of Thermo-Mechanically Rolled Direct Quenched and Partitioned Steels. Materials science and engineering a: structural materials properties microstructure and processing, 840, 142788, DOI: 10.1016/j.msea.2022.142788.
Li, M., X. Wang, H. Yao, H. Saxén and Y. Yu
“Analysis of particle size distribution of coke on blast furnace conveyor belt using object detection”, Processes 10 (2022) 1902.
Lin Y, Yan B, Wen Y, Liang Z, Fabritius T & Shu Q
Dissolution Behavior of Silica in Molten CaO-SiO2-Fe2O3-MgO-MNO Slag. Journal of the American Ceramic Society, 105, 6 , 3774-3785, DOI: 10.1111/jace.18346.
Lin S, Gao L, Yang Y, Liu R, Chen J, Guo S, Omran M & Chen G
Microwave-Enhanced Reduction of Manganese from a Low-Grade Pyrolusite Ore Using Pyrite: Process Optimization and Kinetic Studies. Environmental science and pollution research, 29, 58915-58926, DOI: 10.1007/s11356-022-19988-0.
Lindroos M, Scherer J-M, Forest S, Laukkanen A, Andersson T, Vaara J, Mäntylä A & Frondelius T
Micromorphic Crystal Plasticity Approach to Damage Regularization and Size Effects in Martensitic Steels. International journal of plasticity, 151, 103187, DOI: 10.1016/j.ijplas.2021.103187.
Lipiäinen K, Afkhami S, Ahola A & Björk T
Evaluation of Geometrical Notch and Quality Effects in the Fatigue Strength Assessment of Ultra-High-Strength Steel Cut Edges. – Structures 37, 881–892. http://dx.doi.org/10.1016/j.istruc.2022.01.069
Lipiäinen K, Ahola A, Kaijalainen A & Björk T
Fatigue Performance of Notched and Hot-Dip Galvanized Laser and Mechanically Cut S960 Steel Components Considering Local Defects with the Theory of Critical Distances. International journal of fatigue, 164, 107127, DOI: 10.1016/j.ijfatigue.2022.107127.
Liu W, Shao L, Zou Z & Saxén H
Asymptotic Model of Refractory and Buildup State of the Blast Furnace Hearth. - Metallurgical and Materials Transactions B: Process Metallurgy and Materials Processing Science, 53(1), 320–333.
Liu D, Gao L, Chen G, Zhou J, Guo S, Omran M & Chen J
Enhancement Effects of Distiller’s Dried Grains as Reducing Agent on the Kinetics and Leaching of Pyrolusite from Manganese Ore. Journal of Materials Research and Technology, 19, 4270-4281, DOI: 10.1016/j.jmrt.2022.07.005.
Liu W, Shao L, Zou Z-S & Saxén H
“Numerical analysis of blast furnace hearth drainage based on a simulated Hele-Shaw model”, Steel research international 93 (2022) 2100629.
Ma Y-F, Xiong Y, Chen Z, Zha X-Q, He T-T, Li Y, Pallaspuro S, Wang S, Huttula M & Cao W
Effect of Surface Nanocrystallization Produced by Laser Shock Processing on the Corrosion Fatigue Behavior of 300m Steel. Surface and coatings technology, 439, 128426, DOI: 10.1016/j.surfcoat.2022.128426.
Ma A, Zheng X, Gao L, Li K, Omran M & Chen G
Investigations on the Thermodynamics Characteristics, Thermal and Dielectric Properties of Calcium-Activated Zinc-Containing Metallurgical Residues. Materials, 15, 3, 714, DOI: 10.3390/ma15030714.
Ma Y-F, Xiong Y, Chen Z-G, Zha X-Q, He T-T, Li Y, Singh H, Kömi J, Huttula M & Cao W
Microstructure Evolution and Properties of Gradient Nonostructures Subjected to Laser Shock Processing in 300m Ultrahigh-Strength Steel. Steel research international, 93, 2, 2100434, DOI: 10.1002/srin.202100434.
Mei X, Zhao Q, Min Y, Saxén H & Zevenhoven R
Phase Transition and Dissolution Behavior of Ca/Mg-Bearing Silicates of Steel Slag in Acidic Solutions for Integration with Carbon Sequestration. Process Safety and Environmental Protection, 159, 221–231.
Mei X, Zhao Q, Li Y, Min Y, Liu C, Saxén H & Zevenhoven R
“Phase transition and morphology evolution of precipitated calcium carbonate (PCC) in the CO2 mineralization process”, Fuel 328 (2022) 125259.
Miettinen J, Somani M, Visuri V-V, Koskenniska S, Louhenkilpi S, Fabritius T & Kömi J
Simulation of the Solidification and Microstructural Evolution in Steel Casting Processes Using the Interdenritic Solidification Tool. Steel research international, 93, 9, 2200120, DOI: 10.1002/srin.202200120.
Mitas B, Visuri V-V & Schenk J
Mathematical Modeling of the Ejected Droplet Size Distribution in the Vicinity of a Gas-Liquid Impingement Zone. Metallurgical and materials transactions b: process metallurgy and materials processing science, 53, 5, 3083-3094, DOI: 10.1007/s11663-022-02588-1.
Modaresialam M, Roozbahani H, Alizadeh M, Salminen A & Handroos H
In-situ monitoring and defect detection of selective laser melting process and impact of process parameters on the quality of fabricated SS 316L. IEEE Access http://dx.doi.org/10.1109/ACCESS.2022.3169509
Mondal D, Wei H, Yu Y & Saxén H
Computational Study of Gas-Flow and Temperature Dynamics at Blast Furnace Charging. Steel Research International. 2022, 2200035. DOI: 10.1002/srin.202200035
Mondal D, Liu W, Bartusch H, Kaymak Y, Paananen T, Mattila O & Saxén H
“Numerical study of gas flow and temperature patterns in the blast furnace throat”, Metallurgical and Materials Transactions B 53 (2022) 3882-3895.
Motlagh Z., Momeni A, Tolaminejad B, Javaheri V & Soltanalinezhad M
EBSD Study on the Effect of Second Phases and Restoration Mechanisms in Hot Deformed New Mn-Ni-Cr Alloy. Materials chemistry and physics, 279, 125771, DOI: 10.1016/j.matchemphys.2022.125771.
Norrena J, Ilmola J & Alatarvas T
AMET: Platform Economy in Metals Processing: Final Report. Oulu. 59. http://urn.fi/urn:isbn:9789526231839
Nurmesniemi E-T, Huhta M, Derkani M, Isteri V, Hanein T, Hu T, Tanskanen P & Lassi U
Removal of Sulphate and Arsenic from Wastewater Using Calcium Sulfoaluminate (Ye’Elimite). Frontiers in materials, 9, 943486, DOI: 10.3389/fmats.2022.943486.
Pashangeh S, Ghasemi Banadkouki S, Somani M & Kömi J
Characteristics and Kinetics of Bainite Transformation Behaviour in a High-Silicon Medium-Carbon Steel above and below the Ms Temperature. Materials, 15, 2 , 539, DOI: 10.3390/ma15020539.
Patnamsetty M, Ghosh S, Somani M & Peura P
Characterization of Hot Deformation Behavior of AL0.3Cocrfeni High-Entropy Alloy and Development of Processing Map. Journal of alloys and compounds, 914, 165341, DOI: 10.1016/j.jallcom.2022.165341.
Pauna H, Aula M, Kaukonen S, Huttula M & Fabritius T
Optical Emission Spectroscopy as a Tool for Process Control of Steelmaking Burners. 8th International Congress on the Science and Technology of Steelmaking, 186-193, PR-531-019.
Pauna H, Ernst D, Zarl M, Aula M, Schenk J, Huttula M & Fabritius T
Hydrogen Plasma Smelting Reduction Process Monitoring with Optical Emission Spectroscopy – Establishing the Basis for the Method. Journal of cleaner production, 372, 133755, DOI: 10.1016/j.jclepro.2022.133755.
Peys A, Isteri V, Yliniemi J, Yorkshire A, Lemougna P, Utton C, Provis J, Snellings R & Hanein T
Sustainable Iron-Rich Cements: Raw Material Sources and Binder Types. Cement and concrete research, 157, 106834, DOI: 10.1016/j.cemconres.2022.106834.
Pohjonen A, Ramesh Babu S & Visuri V-V
Coupled Model for Carbon Partitioning, Diffusion, Cottrell Atmosphere Formation and Cementite Precipitation in Martensite During Quenching. Computational materials science, 209, 111413, DOI: 10.1016/j.commatsci.2022.111413.
Qifeng S, Visuri V-V, Alatarvas T & Fabritius T
A Kinetic Model for Precipitation of Tin Inclusions from both Homogeneous and Heterogenous Nucleation During Solidification of Steel. Metallurgical and materials transactions b: process metallurgy and materials processing science, 53, 4 , 2321-2333 DOI: 10.1007/s11663-022-02531-4.
Qiu H, Huang W, Zhang Y, Chen J, Gao L, Omran M, Nan L & Chen G
Co-Preciptitation of Nano Mg-Y/ZrO2 Ternary Oxide Eutectic System: Effects of Calcination Temperature. Ceramics international, 48, 16 , 23452-23459, DOI: 10.1016/j.ceramint.2022.04.339.
Qiu H, Huang W, Zhang Y, Chen J, Gao L, Omran M, Nan L & Chen G
Preparation of Nano-sized 6MgO-2Y2O3-ZrO2 Powders by a Combined Co-Precipitation and High Energy Ball Milling Process. Ceramics international, 48, 13, 19166-19173, DOI: 10.1016/j.ceramint.2022.03.207.
Rani E, Singh H, Alatarvas T, Kharbach M, Cao W, Sarpi B, Zhu L, Niu Y, Zakharov A, Fabritius T & Huttula M
Uncovering Temperature-Tempted Coordination of Inclusions withing Ultra-High-Strength-Steel via In-Situ Spectro-Microscopy. Journal of Materials Research and Technology, 17, 2333-2342, DOI: 10.1016/j.jmrt.2022.01.170.
Sadeghpour S, Javaheri V, Somani M, Kömi J & Karjalainen P
Heterogenenous Multiphase Microstructure Formation Through Partial Recrystallization of a Warm-Deformed Medium Mn Steel During High-Temperature Partitioning. Materials, 15, 20, 7322, DOI: 10.3390/ma15207322.
Schönbauer B, Ghosh S, Karr U, Pallaspuro S, Kömi J, Frondelius T & Mayer H
Mean-Stress Sensitivity of an Ultrahigh-Strength Steel under Uniaxial and Torsional High and Very High Cycle Fatigue Loading. Fatigue and fracture of engineering materials and structures, 45, 11, 3361-3377, DOI: 10.1111/ffe.13767.
Shu Q, You C, Alatarvas T & Fabritius T
Experimental and Modelings Study of Deformability of Glassy CaO-(MnO)-Al203-SiO2 Inclusions. Metals, 12, 3, 522, DOI: 10.3390/met12030522.
Shu Q, Visuri V-V, Alatarvas T & Fabritius T
A Kinetic Model for Precipitation of Tin Inclusions from both Homogeneous and Heterogenous Nucleation During Solidification of Steel. Metallurgical and materials transactions b: process metallurgy and materials processing science, 53, 4, 2321-2333, DOI: 10.1007/s11663-022-02531-4.
Singh H, Xiong Y, Rani E, Wang S, Kharbach M, Zhou T, Yao H, Niu Y, Zakharov A, King G, de Groot F, Kömi J, Huttula M & Cao W
Unveiling Nano-Scaled Chemical Inhomogeneity Impacts on Corrosion of Ce-Modified 2507 Super-Duplex Stainless Steels. Npj materials degradation, 6, 1, 54, DOI: 10.1038/s41529-022-00263-z.
Skriko T, Ahola A & Björk T
Overview on the Digitized Production of Welded Steel Structures. – Welding in the World. https://doi.org/10.1007/s40194-021-01224-x.
Vitikka O, Iljana M, Heikkilä A, Tkalenko I, Koriuchev N, Shehovsov D, Malkki A & Fabritius T
Suitability of Auger Pressing Briquettes for Blast Furnace Use Based on Laboratory Tests. Minerals, 12, 7, 1-19, 868, DOI: 10.3390/min12070868.
Wang S, Rani E, Gyakwaa F, Singh H, King G, Shu Q, Cao W, Huttula M & Fabritius T
Unveiling Non-Isothermal Crystallization of CaO-Al2O3-B2O3-Na2O-Li2O-SiO2 Glass via in Situ X-ray Scattering and Raman Spectroscopy. Inorganic chemistry, 61, 18 , 7017-7025, DOI: 10.1021/acs.inorgchem.2c00387.
Wei S, Wei H, Saxen H & Yu Y
Numerical Analysis of the Relationship Between Friction Coefficient and Repose Angle of Blast Furnace Raw Materials by Discrete Element Method. Materials, 15(3), 903.
Zhang W, Xue Z, Zou Z-S & Saxén H
“The ideal and regular mechanisms of hematite reduction reactions”, Crystal Research & Technology 57 (2022) 2100240.
Zhang C, Zhao C, Shao L, Saxén H, Qu Y & Zou Z
Numerical Estimation of Hearth Internal Geometry of an Industrial Blast Furnace. - Steel Research International, 93(2), 2100364.
Zhang C, Hou B, Shao L, Zou Z-S & Saxén H
“Estimation of the blast furnace hearth state using an inverse-problem based wear model”, Metals 13 (2022) 1302.
Zheng H, Hao X, Zhang S, Omran M, Chen G, Chen J & Gao L
Modeling of Process and Analysis of Drying Characteristics for Natural TiO2 under Microwave Heating. Chemical engineering and processing, 174, 108900, DOI: 10.1016/j.cep.2022.108900.
Xiong Y, Li Y, Chen H, Qui D, Wei S, Saxén H & Yu Y
“A novel method of Si and Si3N4 powder resources recycling: cold-bonding briquette”, Materials 15 (2022) 5496.

Title
2021

Abd-Elaziem W, Hassan M, Makino T & Hamada A
Grain size affecting the deformation characteristics via micro-injection upsetting. - Materials Science and Technology 37 (10), 918-929. https://doi.org/10.1080/02670836.2021.1964058
Abdel-Aziem W, Hassan M, Makino T & Hamada A
Microstructure, mechanical properties of extruded aluminum at different ram speeds in micro/meso-scale. - Metallography, Microstructure and Analysis 10 (4), 402-409. https://doi.org/10.1007/s13632-021-00753-7
Adediran A, Lemougna P, Yliniemi J, Tanskanen P, Kinnunen P, Roning J & Illikainen M
Recycling glass wool as a fluxing agent in the production of clay- and waste-based ceramics. - Journal of Cleaner Production 289, 125673.
Afkhami S, Dabiri M, Piili H & Björk T
Effects of manufacturing parameters and mechanical post-processing on stainless steel 316L processed by Laser Powder Bed Fusion. - Materials Science and Engineering A 802, 140660.
Afkhami S, Dabiri E, Lipiäinen K, Piili H & Björk T.
Effects of notch-load interactions on the mechanical performance of 3D printed tool steel 18Ni300. – Additive Manufacturing 47, 102260. https://doi.org/10.1016/j.addma.2021.102260
Ahola A, Skriko T, Lipiäinen K & Björk T
On the weld root fatigue strength and improvement techniques for non-load-carrying transverse attachment joints with single-sided fillet elds and made of mild and ultra-high-strength steels. – Engineering Structures 249, 113373. http://dx.doi.org/10.1016/j.engstruct.2021.113373
Airaksinen S, Tuovinen T, Vuolio T, Laukka A, Heikkinen E-P, Riekki E & Fabritius T
Oxide scale formation of EN 1.4622 and EN 1.4828 stainless steels during annealing and descaling behavior in neutral electrolytic pickling. - Steel research international in press. https://doi.org/10.1002/srin.202100366
Akujärvi V, Cedell T, Gutnichenko O, Jaskari M & Andersson M
Evolution of magnetic properties during tempering. - International Journal of Advanced Manufacturing Technology online first, online first . http://dx.doi.org/10.1007/s00170-021-08464-7
Ali M, Nyo T, Kaijalainen A, Javaheri V, Tervo H, Hannula J, Somani M & Kömi J
Incompatible effects of B and B + Nb additions and inclusions' characteristics on the microstructures and mechanical properties of low-carbon steels. - Materials Science and Engineering A 619, 141453. http://dx.doi.org/10.1016/j.msea.2021.141453
Aravindh A, Kistanov A, Alatalo M, Kömi J, Huttula M & Cao W
Incorporation of Si atoms into CrCoNiFe high-entropy alloy: a DFT study. - Journal of Physics: Condensed Matter 33 (13), 135703.
Aravindh A, Cao W, Alatalo M, Huttula M & Kömi J
Adsorption of CO2 on ω-Fe (0001) surface: insights from density functional theory. - Research Advances 11, 6825–6830.
Arola A-M, Kaijalainen A, Kesti V, Troive L, Larkiola J & Porter D
The effect of mechanical behavior of bendability of ultrahigh-strength steel. - Materials Today Communications 26, 101943.
Assa A, Cao W, Alatalo M, Huttula M & Kömi J
Adsorption of CO2 on ω-Fe (0001) surface: insights from density functional theory. - Rsc Advances 11, 6825-683. https://doi.org/10.1039/D0RA09194D
Babanejhad A, Mosallaee M, Kisko A, Jaskari M & Karjalainen P
Correlation between potentiodynamic polarization behaviors of transient liquid phase Bonded 2205 Duplex Stainless Steel and the bonding constituents. - Metallurgical and Materials Transactions A 52A, 2435–2450. https://doi.org/10.1007/s11661-021-06234-4
Braun M, Ahola A, Milaković A-S & Ehlers S
Comparison of local fatigue assessment methods for high-quality butt-welded joints made of high-strength steel. – Forces in Mechanics 6, 100056. http://dx.doi.org/10.1016/j.finmec.2021.100056
Charandabi F, Jafarian H, Mahdavi S, Javaheri V & Heidarzadeh A
Modification of microstructure, hardness, and wear characteristics of an automotive-grade Al-Si alloy after friction stir processing. - Journal of Adhesion Science and Technology https://doi.org/10.1080/01694243.2021.1898858
Chen G, Li Q, Ling Y, Zheng H, Chen J, Jiang Qi, Li K, Peng J, Omran M & Gao L
Phase stability and microstructure morphology of microwave-sintered magnesia-partially stabilised zirconia. - Ceramics International 47 (3), 4076-4082.
Chen Z, Liu C, Rani E, Singh H, Huttula M, Kömi J & Cao W
Ultrasonic vibration-induced severe plastic deformation of Cu foils: effects of elastic-plastic stress wave bounce, acoustic softening, and size ffect. - International Journal of Advanced Manufacturing Technology 115 (11-12), 3617-3629 . https://doi.org/10.1007/s00170-021-07390-y
Das S, Shee S, Kömi J & Sahu P
X-ray Line profile analysis of the deformation microstructure in a medium-grained Fe-Mn-Al-C austenitic steel. - Materials Characterization 172, 110833.
Das S, Shyamala T, Sahu T, Kömi J, Chakraborti P, Porter D, Karjalainen P & Sahu P
On the mechanism of cross-slip induced dislocation substructure formation in an High-Mn Steel. - Materialia 15, 101042.
Dong H, Li Z, Somani M & Misra R
The significance of phase reversion-induced nanograined/ultrafine-grained (NG/UFG) structure on the strain hardening behavior and deformation mechanism in copper-bearing antimicrobial austenitic stainless steel. - Journal of the Mechanical Behavior of Biomedical Materials 119, 104489. https://doi.org/10.1016/j.jmbbm.2021.104489
Droste M, Järvenpää A, Jaskari M, Motylenko M, Weidner A, Karjalainen P & Biermann H
The role of grain size in static and cyclic deformation behaviour of a laser reversion annealed metastable austenitic steel. Fatigue & Fracture of Engineering Materials & Structures 44 (1), 43–62. https://doi.org/10.1111/ffe.13326
Du J, Gao L, Yang Y, Omran M, Chen G, Guo S, Chen J & Ruan R
Study on thermochemical characteristics properties and pyrolysis kinetics of the mixtures of waste corn stalk and pyrolusite. Bioresource Technology 324, 124660.
Du J, Yang Y, Omran M & Guo S
Research status and progress of microwave associated leaching. - Current Microwave Chemistry 8 (1). https://doi.org/10.2174/2213335607999201207151812
Du J, Gao L, Yang Y, Guo S, Omran M, Chen J & Chen G
Dielectric characterisation and reduction properties of the blending mixtures of low-grade pyrolusite and waste corn stalks in the microwave field. - Fuel 305, 121546 . https://doi.org/10.1016/j.fuel.2021.121546
Frondelius T, Kaarakka T, Kaleva O, Kouhia R, Orelma H & Vaara J
Varmuuskerroin väsymisen kontinuumimallissa. - Rakenteiden Mekaniikka 54 (1), 21–29. https://doi.org/10.23998/rm.78149
Gaber G, Mohamed L, Järvenpää A & Hamada A
Enhancement of corrosion protection of AISI 201 austenitic stainless steel in acidic chloride solutions by Ce-doped TiO2 coating. - Surface and coatings technology 423, 127618. https://doi.org/10.1016/j.surfcoat.2021.127618
Ghosh S, Patnamsetty M, Somani M & Peura P
Characteristics of dynamic softening during high temperature deformation of CoCrFeMnNi high-entropy alloy and its correlation with the evolving microstructure and micro-texture. - Journal of Materials Research and Technology online first, online first. https://doi.org/10.1016/j.jmrt.2021.11.089
Ghosh S, Mula S, Malakar A, Somani M & Kömi J
High cycle fatigue performance, crack growth and failure mechanisms of an ultrafine-grained Nb+Ti stabilized, low-C microalloyed steel processed by multiphase controlled rolling and forging. - Materials science and engineering a: structural materials properties microstructure and processing 825, 141883. https://doi.org/10.1016/j.msea.2021.141883
Ghosh S, Bibhanshu N, Suwas S & Chatterjee K
Surface mechanical attrition treatment of additively manufactured 316L stainless steel yields gradient nanostructure with superior strength and ductility. - Materials science and engineering a: structural materials properties microstructure and processing 820, 141540. https://doi.org/10.1016/j.msea.2021.141540
Gupta A, Aula M, Pihlasalo J, Mäkelä P, Huttula M & Fabritius T
Preparation of synthetic titania slag relevant to the industrial smelting process using an induction furnace. - Applied Sciences 11 (3), 1153.
Gyakwaa F, Aula M, Alatarvas T, Shu Q, Huttula M & Fabritius T
Quantification of synthetic nonmetallic inclusion multiphase mixtures from a CaO–Al2O3–MgO–CaS system using Raman spectroscopy. - Steel Research International 92 (1), 2000322.
Gyakwaa F, Alatarvas T, Shu Q, Aula M & Fabritius T
Characterization of synthetic non-metallic inclusions consisting of TiN, Ti2O3, and oxides of Al2O3 and MgO·Al2O3 spinel using Raman spectroscopy. - Metals 11 (10), 1549. https://doi.org/10.3390/met11101549
Halonen S, Pitkäaho S, Pääkkönen T, Väisänen E & Haataja M
A novel method for automated SCR catalyst uniformity measurement. - Chemical engineering journal 425, 130257. https://doi.org/10.1016/j.cej.2021.130257
Hamada A, Ali M, Ghosh S, Jaskari M, Keskitalo M & Järvenpää A
Mechanical performance and formability of laser-welded dissimilar butt joints between medium-Mn stainless steel and high-strength carbon steel. - Materials science and engineering a: structural materials properties microstructure and processing 831, 142200. https://doi.org/10.1016/j.msea.2021.142200
Hammam A, Li Y, Nie H, Zan L, Ding W, Ge Y, Li M, Omran M & Yu Y
Isothermal and non-isothermal reduction behaviors of iron ore compacts in pure hydrogen atmosphere and kinetic analysis. - Mining, Metallurgy & Exploration 38, 81–93.
Hammam A, Cao Y, El-Geassy A-H, El-Sadek M, Li Y, Wei H, Omran M & Yu Y
Non-Isothermal reduction kinetics of iron ore fines with carbon-bearing materials. - Metals 11 (7), 1137. http://dx.doi.org/10.3390/met11071137
Heikkilä A, Koskela, Iljana M, Lin R, Bartusch H, Heikkinen E-P & Fabritius T
Coke gasification in blast furnace shaft conditions with H2 and H2O containing atmospheres. - Steel Research International 92 (3), 2000456.
Heikkinen E-P, Heikkilä A, Vallo K, Ikäheimonen T & Fabritius T
A computational study on the mixing and reduction of slags from ferrochrome and stainless steel production. - Calphad: computer coupling of phase diagrams and thermochemistry 75, 102349 . https://doi.org/10.1016/j.calphad.2021.102349
Hietala M, Jaskari M, Ali M, Järvenpää A & Hamada A
Dissimilar laser welding of an austenitic stainless steel and abrasion resistant steel: Microstructural evolution and mechanical properties enhanced by post-weld heat treatment. - Materials 14 (19), 5580. https://doi.org/10.3390/ma14195580
Hietala M, Ali M, Khosravifard A, Keskitalo M, Järvenpää A & Hamada A
Optimization of the tensile-shear strength of laser-welded lap joints of ultra-high strength abrasion resistance steel. - Journal of Materials Research and Technology 11, 1434–1442.
Ibrahim I, Khedr M, Mahmoud T, Abdel-Aleem H & Hamada A
Study on the mechanical performance of dissimilar butt joints between low Ni medium-Mn and Ni-Cr austenitic stainless steels processed by gas tungsten arc welding. - Metals 11 (9), 1439. https://doi.org/10.3390/met11091439
Iljana M, Heikkinen E-P & Fabritius T
Estimation of iron ore pellet softening in a blast furnace with computational thermodynamics. - Metals 11 (10), 1515 . https://doi.org/10.3390/met11101515
Ilmola J, Pohjonen A, Koskenniska S, Seppälä O, Leinonen O, Jokisaari J, Pyykkönen J & Larkiola J
Coupled heat transfer and phase transformations of dual-phase steel in coil cooling. - Materials Today Communications 26, 101973.
https://doi.org/10.1016/j.mtcomm.2020.101973
Isteri V, Ohenoja K, Hanein T, Kinoshita H, Illikainen M, Tanskanen P & Fabritius T
The effect of fluoride and iron content on the clinkering of Alite-Ye'elimite-Ferrite (AYF) Cement Systems. - Frontiers in built environment 7, 698830 . https://doi.org/10.3389/fbuil.2021.698830
Jaskari M, Ghosh S, Miettunen I, Karjalainen P & Järvenpää A
Tensile properties and deformation of AISI 316L additively manufactured with various energy densities. - Materials 14 (19), 5809.
Javaheri V, Haiko O, Sadeghpour S, Valtonen K, Kömi J & Porter D
On the role of grain size on slurry erosion behavior of a novel medium-carbon, low-alloy pipeline steel after induction hardening. Wear 476, 203678. https://doi.org/10.1016/j.wear.2021.203678
Jawahery S, Visuri V-V, Wasbø S, Hammervold A, Hyttinen N & Schlautmann M
Thermophysical model for online optimization and control of the electric arc furnace. - Metals 11 (10), 1587 . https://doi.org/10.3390/met11101587
Järvenpää A, Ghosh S, Khosravifard A, Jaskari M & Hamada A
A new processing route to develop nano-grained structure of a TRIP-aided austenitic stainless-steel using double reversion fast-heating annealing. - Materials Science and Engineering A 808, 140917.
Kaijalainen A, Latypova R, Tervo H & Kauppi T
Kehittyneiden erikoislujien terästen tutkimus- ja kehitystyö Oulun yliopistossa. - Materia (5), 36-41.
Kaikkonen P, Somani M, Karjalainen P & Kömi J
Flow stress behaviour and static recrystallization characteristics of hot deformed austenite in microalloyed medium-carbon bainitic steels. - Metals 11, 138.
Kallio R, Tanskanen P & Luukkanen S
Magnetic preconcentration and process mineralogical study of the Kiviniemi Sc-Enriched ferrodiorite. - Minerals 11 (9), 966. https://doi.org/10.3390/min11090966
Kamali M, Mashreghi A, Karjalainen P, Hasani S, Javaheri V, Seiyedbeigi M & Kömi J
Impact of annealing treatment on the microstructural-dependent mechanical properties of a cold-rolled Fe-Co-10V alloy. - Materials Science and Engineering A 821, 141595
Kantanen P, Javaheri V, Somani M, Porter D & Kömi J
Effect of deformation and grain size on austenite decomposition during quenching and partitioning of (high) silicon-aluminum steels. - Materials Characterization 171, 110793.
Karhu M, Kujanpää V
Gas tungsten arc process optimization and assessment for robotized position welding of austenitic stainless steel edge joints. – CIRP Journal of Manufacturing Science and Technology 36, 12–22. http://dx.doi.org/10.1016/j.cirpj.2021.10.012
Keränen L, Kangaspuoskari M & Niskanen J
Ultrahigh-strength steels at elevated temperatures. - Journal of Constructional Steel Research 183, 106739. https://doi.org/10.1016/j.jcsr.2021.106739
Khalifa A, Bazhin V, Vadimovna K, Abdelrahim A & Ahmed Y
Study the recycling of red mud in iron ore sintering process. - Journal of ecological engineering 22 (6), 191-201 . https://doi.org/10.12911/22998993/137966
Khorshidi H, Kermanpur A, Rastegari H, Ghassemali E & Somani M
Design of a hot deformation processing map for a Ni-free, N-bearing austenitic stainless steel. - Materials today communications 27, 102352. https://doi.org/10.1016/j.mtcomm.2021.102352
Kistanov A, Rani E, Singh H, Fabritius T, Huttula M & Cao W
Discerning phase-matrices for individual nitride inclusions within ultra-high-strength steel : experiment driven DFT investigation. - Physical chemistry chemical physics Online first, Online first . https://doi.org/10.1039/D1CP05068K
Kodukula S, Petäjäjärvi M, Savolainen J, Fabritius T & Porter D
Influence of calcium treatment and electromagnetic stirring on ridging in dual-stabilized ferritic stainless steels. - Steel Research International 92 (2), 2000445.
Kodukula S, Kokkomäki H, Puukko E, Porter D & Kömi J
Influence of hot rolling finishing temperature on texture and ridging resistance in stabilized ferritic stainless steels. - Steel research international 92 (7), 2000695. https://doi.org/10.1002/srin.202000695
Kodukula S, Karjalainen P & Porter D
Influence of micro-texture distribution and straining direction on the ridging of ferritic stainless steels. - ISIJ International 61 (3), 975–984.
Kodukula S, Manninen T & Porter D
Estimation of Lankford coefficients of austenitic and ferritic stainless steels using mean grain orientations from micro-texture measurements. - ISIJ International 61 (1), 401–407. https://doi.org/10.2355/isijinternational.ISIJINT-2020-256
Kodukula S, Ohligschlager T & Porter D
Quantification of the severity of ridging in ferritic stainless steel sheets using a profilometric technique. - ISIJ International 61 (1), 380–386. https://doi.org/10.2355/isijinternational.ISIJINT-2020-137
Kokko R, Vaara J, Kuivaniemi T & Frondelius T
Numerical simulation of laser welded joints: modern fatigue analysis methodology. - Rakenteiden mekaniikka 53 (4), 342–355. https://doi.org/10.23998/rm.77613
Koskela A, Heikkila A, Bergna D, Salminen J & Fabritius T
Effects of briquetting and high pyrolysis temperature on hydrolysis lignin char properties and reactivity in CO-CO2-N-2 conditions. - Minerals 11 (2), 187.
Koskenniska S, Kaijalainen A, Pikkarainen T, Mehtonen S, Porter D, Kömi J
Effect of as-cast structure and macrosegregation on mechanical properties in direct-quenched low alloy ultrahigh-strength steel. - Metallurgical and Materials Transactions B 52B, 95–106.
Köhler M, Sun L, Hensel J, Pallaspuro S, Kömi J, Dilger K & Zhang Z
Comparative study of deposition patterns for DED-Arc additive manufacturing of Al-4046. - Materials & design 210, 110122. https://doi.org/10.1016/j.matdes.2021.110122
Laine J, Vaara J, Jalava K, Soivio K, Orkas J & Frondelius T
The mechanical properties of ductile iron at intermediate temperatures: the effect of silicon content and pearlite fraction. - International Journal of Metalcasting 15 (2), 538–547.
Laine J, Leppanen A, Vaara J, Jalava K, Orkas J & Frondelius T
Ductile iron optimization approach for mechanically and thermally loaded components. - International journal of metalcasting 15 (3), 962-968. https://doi.org/10.1007/s40962-020-00529-9
Laukka A, Heikkinen E.-P & Fabritius T
The atmosphere’s effect on stainless steel slabs’ oxide formation in a CH4-fuelled reheating furnace. - Metals 11 (4), 621. https://doi.org/10.3390/met11040621
Laukkanen A, Uusikallio S, Lindroos M, Andersson T, Kömi J & Porter D
Micromechanics driven design of ferritic–austenitic duplex stainless steel microstructures for improved cleavage fracture toughness. - Engineering fracture mechanics 253, 107878. https://doi.org/10.1016/j.engfracmech.2021.107878
Lehenkari T, Aravindh S, Cao W, Alatalo M, Huttula M & Kömi J
Embrittlement analysis of Σ5[210]/(-1-20) FeAl grain boundary in presence of defects: An ab initio study. - Metallurgical and materials transactions a: physical metallurgy and materials science 52, 5215-5220. https://doi.org/10.1007/s11661-021-06450-y
Lemougna P, Yliniemi J, Adediran A, Luukkonen T, Tanskanen P, Finnilä M & Illikainen M
Synthesis and characterization of porous ceramics from spodumene tailings and waste glass wool. - Ceramics international 47 (23), 33286-33297 . https://doi.org/10.1016/j.ceramint.2021.08.231
Li Y, Pallaspuro S, Ren X, He J, Kömi J & Zhang Z
A multi-barrier model assisted CAFE method for predicting ductile-to-brittle transition with application to a low-carbon ultrahigh-strength steel. - Mechanics of Materials 153, 103669.
Li K, Jiang Q, Chen G, Gao L, Peng J, Chen Q, Koppala S, Omran M & Chen J
Kinetics characteristics and microwave reduction behavior of walnut shell-pyrolusite blends. - Bioresource Technology 319, 124172.
Li Y, Xiong Y, Zhou T, Singh H, Kömi J & Huttula M
Impacts of warm equal-channel angular pressing on microstructure and mechanical properties of granular pearlitic steel. - Steel Research International 92 (4), 2000496. https://doi.org/10.1002/srin.202000496
Li Q, Ling Y, Zheng H, Chen G, Chen J, Koppala S, Jiang Q, Li K, Omran M & Gao L
Phase microstructure and morphology evolution of MgO-PSZ ceramics during the microwave sintering process. - Ceramics International 47 (11), 15849–15858.
Li Q, Ling Y, Zheng, H, Omran M, Li K, Gao L, Zhang M, Chen J & Chen G
Effect of microwave heating duration on the stability of the partially stabilised zirconia doped with CaO. Ceramics International 47 (16), 22447–22460. https://doi.org/10.1016/j.ceramint.2021.04.254
Li Y, Chen H, Hammam A, Wei H, Nie H, Ding W, Omran M, Yan L & Yu Y
Study of an organic binder of cold-bonded briquettes with two different iron bearing materials. - Materials 14 (11), 2952. http://dx.doi.org/10.3390/ma14112952
Li Q, Hao X, Gui Y, Qiu H, Ling Y, Zheng H, Omran M, Gao L, Chen J & Chen G
Controlled sintering and phase transformation of yttria-doped tetragonal zirconia polycrystal material. - Ceramics international 47 (19), 27188-27194 . http://dx.doi.org/10.1016/j.ceramint.2021.06.139
Lipiäinen K, Kaijalainen A, Ahola A & Björk T
Fatigue strength assessment of cut edges considering material strength and cutting quality. - International Journal of Fatigue 149, 106263.
Lipiäinen K, Ahola A, Virolainen E, Hirvi A & Björk T
Fatigue strength of hot-dip galvanized S960 cut edges and longitudinal welds. – Journal of Constructional Steel Research 189, 107083. http://dx.doi.org/10.1016/j.jcsr.2021.107083
Lin S, Li K, Omran M, Yang Y, Gao L, Guo S & Chen J
Microwave-assisted method investigation for the selective and enhanced leaching of manganese from low-grade pyrolusite using pyrite as the reducing agent. - Chemical Engineering and Processing 159, 108209.
Lin Y, Yan B, Shu Q & Fabritius T
Synergetic valorization of basic oxygen furnace slag and stone coal : metal recovery and preparation of glass-ceramics. - Waste management 135, 158-166 . http://doi.org/10.1016/j.wasman.2021.08.044
Ling Y, Li Q, Zheng H, Omran M, Gao L, Li K & Chen G
Drying kinetics and microstructure evolution of nano-zirconia under microwave pretreatment. - Ceramics International 47 (16), 22530–22539. https://doi.org/10.1016/j.ceramint.2021.04.263
Ling Y, Hao X, Gui Y, Qiu H, Li Q, Zheng H, Omran M, Gao L, Chen J & Chen G
Stability properties and microstructure properties of microwave-sintered CeO2 doped zirconia ceramics. - Ceramics international 47 (20), 28210-28217. https://doi.org/10.1016/j.ceramint.2021.06.234
Ma A, Zheng X, Li K, Omran M & Chen G
The adsorption removal of tannic acid by regenerated activated carbon from the spent catalyst of vinyl acetate synthesis. - Journal of Materials Research and Technology 10, 697–708.
Ma A, Zheng X, Gao L, Li K, Omran M & Chen G
Enhanced leaching of zinc from zinc-containing metallurgical residues via microwave calcium activation pretreatment. - Metals 11 (12), 1922. https://doi.org/10.3390/met11121922
Meuronen J, Mäntylä A, Vaara J, Hintikka J, Juoksukangas J, Lehtovaara Arto & Frondelius T
Fretting test rig with variable normal force. - Rakenteiden mekaniikka 53 (4), 308–328. https://doi.org/10.23998/rm.83573
Miettinen J, Visuri V-V & Fabritius T
Thermodynamic description of ternary Fe–B–X systems. Part 8: Fe–B–Mo, with extension to quaternary Fe–B–Cr–Mo system. -Archives of Metallurgy and Materials 66 (1), 281–295. DOI: 10.24425/amm.2021.134786.
Miettinen J, Visuri V-V & Fabritius T
Thermodynamic description of ternary Fe–B–X systems. Part 9: Fe–B–Cu. - Archives of Metallurgy and Materials 66 (1), 297–304, DOI: 10.24425/amm.2021.134787.
Miettinen J, Koskenniska S, Somani M, Louhenkilpi S, Pohjonen A, Larkiola J & Kömi J
Optimization of the CCT curves for steels containing Al, Cu and B. - Metallurgical and Materials Transactions B 52B (3), 1640–1663. https://doi.org/10.1007/s11663-021-02130-9
Miettinen J, Visuri V-V & Fabritius T
Carbon-containing thermodynamic descriptions of the Fe–Cr–Cu–Mo–Ni–C system for modeling the solidification of steels. - Acta Universitatis Ouluensis Series C Technica 787. Oulu, Oulun yliopisto. 214. http://urn.fi/urn:isbn:9789526229300
Miettunen I, Ghosh S, Somani M, Pallaspuro S & Kömi J
Competitive mechanisms occurring during quenching and partitioning of three silicon variants of 0.4 wt.% carbon steels. - Journal of Materials Research and Technology 11, 1045–1060.
Moshiri A, Zarei-Hanzaki A, Anousheh A, Abedi H, Su Sohn S, Yang J, Jaskari M, Karjalainen P & Berto F
On the fatigue and dwell-fatigue behavior of a low-density steel and the correlated microstructure origin of damage mechanism. - Journal of Materials Research and Technology 15, 6136–6154. https://doi.org/10.1016/j.jmrt.2021.10.135
Mäkikangas J, Rautio T, Jalava-Kanervio J, Mustakangas A & Järvenpää A
Laser welding of laser powder bed fusion (LPBF) manufactured 316L stainless steel lap joint. - Key engineering materials 883, 242-249. https://doi.org/10.4028/www.scientific.net/KEM.883.242
Neuvonen R, Skriko T & Björk T
Discretization and material parameter characterization for a HAZ in direct-quenched armor steel. - European Journal of Mechanics - A/ Solids 89, 104305.
Nyanor P, El-Kady O, Yehia H, Hamada A & Hassan M
Effect of bimodal-sized hybrid TiC-CNT reinforcement on the mechanical properties and coefficient of thermal expansion of aluminium matrix composites. - Metals and materials international 27 (4), 753-766. http://doi.org/10.1007/s12540-020-00802-w
Pashangeh S, Ghasemi Banadkouki S, Besharati F, Mehrabi F, Somani M & Kömi J
Color light metallography versus electron microscopy for detecting and estimating various phases in a high-strength multiphase steel. - Metals 11 (6), 855. https://doi.org/10.3390/met11060855
Pashangeh S, Somani M & Banadkouki S
Structure-property correlations of a medium C steel following quenching and isothermal holding above and below the Ms temperature. - ISIJ International 61 (1), 442–451. https://doi.org/10.2355/isijinternational.ISIJINT-2020-355
Pauna H, Willms T, Aula M, Echterhof T, Huttula M & Fabritius T
Cyanide recombination in electric arc furnace plasma. - Plasma Research Express 3 (2), 025008. http://dx.doi.org/10.1088/2516-1067/abfc2a
Pauna H, Tuomela A, Aula M, Turunen P, Pankratov V, Huttula M & Fabritius T
Toward on-line slag composition analysis: optical emissions from laboratory electric arc. - Metallurgical and materials transactions b: process metallurgy and materials processing science [Epub ahead of print 07 Dec 2021], 1-12 . http://dx.doi.org/10.1007/s11663-021-02382-5
Pauna H, Aula M, Huttula M & Fabritius T
Quantifying the CaO and CaF 2 content of industrial ladle furnace slag with optical emissions measured through the casting spout. - Steel research international accepted, accepted . http://dx.doi.org/10.1002/srin.202100519
Pohjonen A, Koskenniska S, Uusitalo J, Nyo T, Larkiola J & Kömi J
Application of image analysis method combined with microhardness measurement to determine phase fractions. - Materials Science Forum 1016, 1153–1158.
Pohjonen A, Kaikkonen P, Seppälä O, Ilmola J, Javaheri V, Manninen T & Somani M
Numerical and experimental study on thermo-mechanical processing of medium-carbon steels at low temperatures for achieving ultrafine-structured bainite. - Materialia 18, 101150. https://doi.org/10.1016/j.mtla.2021.101150
Rafati M, Mostafapour A, Laieghi H, Somani M & Kömi J
Characterization of friction stir and TIG welded CK45 carbon steel. - Materials 14 (15), 4098. https://doi.org/10.3390/ma14154098
Rohani Raftar H, Dabiri E, Ahola A & Björk T
Weld root fatigue assessment of load-carrying fillet welded joints: 4R method compared to other methods. – International Journal of Fatigue 156, 106623. http://dx.doi.org/10.1016/j.ijfatigue.2021.106623
Sadeghpour S, Somani M, Kömi J & Karjalainen P
A new combinatorial processing route to achieve an ultrafine-grained, multiphase microstructure in a medium Mn steel. - Journal of Materials Research and Technology 15, 3426-3446. https://doi.org/10.1016/j.jmrt.2021.09.152
Schönbauer B, Ghosh S, Kömi J, Frondelius T & Mayer H
Influence of small defects and nonmetallic inclusions on the high and very high cycle fatigue strength of an ultrahigh-strength steel. - Fatigue and fracture of engineering materials and structures 44 (11), 2990-3007. https://doi.org/10.1111/ffe.13534
Shyamal S, Das S, Jaskari M, Porter D, Karjalainen P & Sahu P
Graded deformation in an Fe-Mn-Al-C steel under bending fatigue. - Materials Letters 285, 129002. https://doi.org/10.1016/j.matlet.2020.129002
Shyamal S, Farahani M, Allam T, Hamada A, Haase C, Kömi J, Chakraborti P & Sahu P
Activation of a hybrid twinning mechanism in a Cr-Ni-Si-V-N medium manganese austenitic steel containing precipitates. - Scripta Materialia 192, 83–88.
Shu Q, Alatarvas T, Visuri V-V & Fabritius T
Modelling the nucleation, growth and agglomeration of alumina inclusions in molten steel by combining Kampmann–Wagner numerical model with particle size grouping method. -Metallurgical and Materials Transactions B52, 1818–1829. https://doi.org/10.1007/s11663-021-02148-z
Singh H, Alatarvas T, Kistanov A, Aravindh S, Wang V, Zhu L, Sarpi B, Niu Y, Zakharov A, de Groot F, Huttula M, Cao W & Fabritius T
Unveiling interactions of non-metallic inclusions within advanced ultra-high strength steel: A spectro-microscopic determination and first-principles elucidation. - Scripta materialia 197, 113791. https://doi.org/10.1016/j.scriptamat.2021.113791
Singh H, Shu Q, King G, Liang Z, Wang Z, Cao W, Huttula M & Fabritius T
Structure and viscosity of CaO-Al2O3-B2O3-BaO slags with varying mass ratio of BaO to CaO. - Journal of the American Ceramic Society 104 (9), 4505-4517. https://doi.org/10.1111/jace.17877
Skriko T, Lipiäinen K, Ahola A, Mettänen H & Björk T
Fatigue strength of longitudinal load-carrying welds in beams made of ultra-high-strength steel. - Journal of Constructional Steel Research 179, 106563.
Tervo H, Kaijalainen A, Javaheri V, Ali M, Alatarvas T, Mehtonen M, Anttila S & Kömi J
Comparison of impact toughness in simulated coarse-grained heat-affected zone of Al-Deoxidized and Ti-Deoxidized offshore steels. - Metals 11 (11), 1783. https://doi.org/10.3390/met11111783
Wang S, Kistanov A, King G, Ghosh S, Singh H, Pallaspuro S, Rahemtulla A, Somani M, Kömi J, Cao W & Huttula M
In-situ quantification and density functional theory elucidation of phase transformation in carbon steel during quenching and partitioning. - Acta materialia 221, 117361. http://doi.org/10.1016/j.actamat.2021.117361
Visuri V-V, Vuolio T & Fabritius T
Datavetoisia menetelmiä raakaraudan rikinpoiston mallinnukseen. - Materia 79.
Wu Y, Uusitalo J & DeArdo A
Investigation of the critical factors controlling sheared edge stretching of ultra-high strength dual-phase steels. - Materials science and engineering a: structural materials properties microstructure and processing 828, 142070. https://doi.org/10.1016/j.msea.2021.142070
Yousefian S, Zarei-Hanzaki A, Barabi A, Abedi H, Moallemi M & Karjalainen P
Microstructure, texture and mechanical properties of a nickel-free high nitrogen duplex stainless steel processed through friction stir spot welding. - Journal of Materials Research and Technology 15, 6491–6505. https://doi.org/10.1016/j.jmrt.2021.11.040
Zhang R, Buchanan C, Matilainen V-P, Daskalaki-Mountanou D, Britton T, Piili H, Salminen A & Gardner L
Mechanical properties and microstructure of additively manufactured stainless steel with laser welded joints. – Materials and Design 208, 109921. http://dx.doi.org/10.1016/j.matdes.2021.109921
Zhang R, Gardner L, Buchanan C, Matilainen V-P, Piili H, Salminen A
Testing and analysis of additively manufactured stainless steel CHS in compression. – Thin-Walled Structures 159, 107270. http://dx.doi.org/10.1016/j.tws.2020.107270
Zheng H, Li Q, Ling Y, Omran M, Gao L & Chen G
Optimisation on the microwave drying of ammonium polyvanadate (APV)- based on a kinetic study. - Journal of Materials Research and Technology 13, 1056–1067. http://dx.doi.org/10.1016/j.jmrt.2021.05.056
Zheng H, Li Q, Ling Y, Omran M, Gao L, Chen J & Chen G
Research on microwave drying technology in the procedure of preparation of V2O5 from ammonium polyvanadate (APV). - Advanced powder technology 32 (7), 2530-2542. https://doi.org/10.1016/j.apt.2021.05.027
Zhou T, Xiong Y, Chen Z-G, Zha X-Q, Lu Y, He T-T, Ren F-Z, Singh H, Kömi J, Huttula M & Cao W
Effect of surface Nano-Crystallization induced by Supersonic Fine Particles Bombarding on microstructure and mechanical properties of 300M Steel. - Surface and Coatings Technology 421, 127381. https://doi.org/10.1016/j.surfcoat.2021.127381

Conferences

Title
2023

Ahmed S, Sabr A, Peltola A, Oja O, Jarn S, Kaijalainen A, Penney D, Peura P, Asnafi N & Lindgren L
The effected of scrap originating trace elements on the properties of low alloyed steels. 42nd Conference of the International Deep Drawing Research Group, IOP conference series: materials science and engineering, 1284, 012041, DOI: 10.1088/1757-899X/1284/1/012041.
Baral A, Isteri V, Adesanya E, Yliniemi J, Fabritius T & Hanein T
Early-age hydration of an EAF slag based alite-ferrite cement clinker in the presence of Na2Co3.
International RILEM Conference on Synergising Expertise towards Sustainability and Robustness of Cement-based Materials and Concrete Structures: SynerCrete’23 - Volume 2, Rilem bookseries, 44, 485-495, DOI: 10.1007/978-3-031-33187-9_45.
Gáspár M, Sisodia R, Tervo H, Javaheri V, Kaijalainen A, Wei Z & Pang J
Challenges and opportunities in the arc welding of offshore steels. Proceedings of the 76th IIW Annual Assembly and International Conference on Welding and Joining (IIW 2023), 16–21 July 2023, Singapore. 567-574.
Hannula J, Plosila P, Kaijalainen A, Suikkanen P & Kömi J
Evaluation of hole expansion ratio of ultra-high strength martensitic steels produced with various processing routes. 42nd International Deep Drawing Research Group (IDDRG) Conference Luleå, Sweden, 19-22 June 2023, IOP conference series: materials science and engineering, 1284, 1, 012036, DOI: 10.1088/1757-899x/1284/1/012036.
Nissilä J, Pylvänäinen M, Laurila J, Ollila S, Visuri V-V & Liedes T
Detecting gas injection problems in vacuum tank degassing using measurements of multiple variables. Lecture Notes in Mechanical Engineering; Proceedings of the 5th International Conference on Maintenance, Condition Monitoring and Diagnostics 2021, Lecture notes in mechanical engineering, 31-42, DOI: 10.1007/978-981-99-1988-8_3.
Oey T, Kekäläinen P, Karhu M, Leivo M, Louhisalmi J, Tyybäkinoja S, Heikkinen E-P, Alatarvas T & Sulasalmi P
Influence of composition and cooling rate on the reactivity and performance of novel steel slags as cement replacements. 8th International Slag Valorisation Symposium, 74-77.
Pallaspuro S, Hesse A-C, Engelke T, Sainio J, Ghosh S, Javaheri V, Dilger K & Kömi J
Impact toughness of an electron-beam welded 0.2C direct-quenched and partitioned steel. 23 European Conference on Fracture - ECF23, Procedia structural integrity, 42, 895-902, DOI: 10.1016/j.prostr.2022.12.113.
Plosila P, Kesti V, Kaijalainen A, Vierelä R, Rautio P & Kömi J
Strain evolution during hole expansion testing of 800 MPA tensile strength hot-rolled steels. 242nd International Deep Drawing Research Group (IDDRG) Conference Luleå, Sweden, 19-22 June 2023, IOP conference series: materials science and engineering, 1284, 1, 012022, DOI: 10.1088/1757-899x/1284/1/012022.
Pokka A-P, Kesti V & Kaijalainen A
Total strain on the outer surface of steel sheets in air bending. Material Forming: The 26th International ESAFORM Conference on Material Forming, Materials research proceedings, 28, 695-704, DOI: 10.21741/9781644902479-75.
Tyybäkinoja S, Heikkinen E-P, Alatarvas T, Sulasalmi P, Louhisalmi J, Oey T, Kekäläinen P, Karhu M & Leivo M
Influence of slag basicity and cooling rate on the structure of EAF steelmaking slags. 8th International Slag Valorisation Symposium, 118-121.

Title
2022

Ahola A, Skriko T & Björk T
Overview on the Fatigue Strength of Single-Sided Transverse and Longitudinal Fillet Weld -Joints. – 9th Edition of the International Conference on Fatigue Design. Procedia Structural Integrity 38, 457–465. http://dx.doi.org/10.1016/j.prostr.2022.03.046
Ahola A & Björk T
Bending effects on the fatigue strength of non-load-carrying transverse attachment joints made of ultra-high-strength steel. – Current Perspectives and New Directions in Mechanics, Modelling and Design of Structural Systems (The Eight International Conference on Structural Engineering, Mechanics and Computation, SEMC2022), 1130–1135. http://dx.doi.org/10.1201/9781003348450-184.
Choudhury T, Narsakka J, Martikainen I, Sikanen E, Kurvinen E, Jastrzebski R, Pyrhonen J & Sopanen J
Design of Thick-Lamination Rotor Cofiguration for a High-Speed Induction Machine in Megawatt Class.. 2022 International Conference on Electrical Machines (ICEM), Proceedings (International Conference on Electrical Machines), 738-744 , DOI: 10.1109/icem51905.2022.9910880 , A4 Article in conference proceedings (peer-reviewed).
Credo A, Kurvinen E, Petrov I & Pyrhönen J
Investigation of Material Combinations for Axially-Laminated Synchronous Machine. 2022 International Conference on Electrical Machines (ICEM) , Proceedings (International Conference on Electrical Machines), 814-820, DOI: 10.1109/icem51905.2022.9910821, A4 Article in conference proceedings (peer-reviewed).
Ghosh S, Schönbauer B, Pallaspuro S, Somani M, Mayer H & Kömi J
Micro-mechanism Associated with Very High Cycle Fatigue Crack Initiation of Advanced DG&P Precessed Steel. 23 European Conference on Fracture - ECF23, Procedia structural integrity, 42, 919-926, DOI: 10.1016/j.prostr.2022.12.116.
Haito O, Valtonen K, Kaijalainen A & Kömi J
High-Stress Abrasive Wear Characteristics of Ultra-High Strength Press-Hardening Steel. Nordtrib 14.-17.6.2022, Ålesund, Norway. 15, Abstract.
Ilmola J, Seppälä O, Pohjonen A & Larkiola J
Virtual Rolling Automation and Setup Calculations for six Stands Fem Finishing Mill. The 19th International Conference on Metal Forming (MF 2022) 11/09/2022 - 14/09/2022 Online, IOP conference series: materials science and engineering, 1270, 1, 012060, DOI: 10.1088/1757-899x/1270/1/012060
Jastrzebski R, Putkonen A, Sikanen E, Zhuravlev A, Choudhury T, Kurvinen E & Pyrhonen J
Dynamics of High-Power Multi-Rotor System. 2022 International Conference on Electrical Machines (ICEM) , Proceedings (International Conference on Electrical Machines), 1225-1231, DOI: 10.1109/icem51905.2022.9910631, A4 Article in conference proceedings (peer-reviewed).
Javaheri V, Sadeghpour S, Aliabad R, Haiko O, Pallaspuro S, Kaijalainen A & Kömi J
On the Role of Rapid Cyclic Re-austenitization on the Grain Refinement and Tensile Properties of an As-rolled Medium Carbon Low Alloy Steel. Oldenburg, Mats; Hardell, Jens; Casellas, Caniel, 8th International Conference of Hot sheet metal forming of high-performance steel, CHS2: May 30th to June 2nd, 2022, Barcelona, Spain. Proceedings, 583-590.
Kaijalainen A, Haiko O, Sadeghpour S, Javaheri V & Kömi J
Effect of Rapid Tempering on the Mechanical Properties and Microstructure of 51CRV4 Steel. Oldenburg, Mats; Hardell, Jens; Casellas, Caniel , 8th International Conference of Hot sheet metal forming of high-performance steel, CHS2: May 30th to June 2nd, 2022, Barcelona, Spain. Proceedings , 369-375.
Kaijalainen A, Pokka A-P, Jaskari M & Kömi J
Effect of Surface Roughness on Strain Distribution During Bending. The 19th International Conference on Metal Forming (MF 2022) 11/09/2022 - 14/09/2022 Online, IOP conference series: materials science and engineering, 1270, 1, 012080, DOI: 10.1088/1757-899x/1270/1/.
Kesti V, Folmerz M, Vierelä R, Rautio P, Ruoppa R, Plosila P, Kaijalainen A, Thuillier S, Grolleau V & Lauren H
An Approach to Describe Edge Ductility. International Deep-Drawing Research Group Conference (IDDRG 2022), 6-10 June, Lorient, France , IOP conference series : materials science and engineering, 1238, 1 , 012035, DOI: 10.1088/1757-899x/1238/1/012035 , A4 Article in conference proceedings (peer-reviewed).
Kisko A, Kaijalainen A, Kurtti L. Kodukula S & Ylimäinen T
The Effect of Hot Rolling and Coiling Temperature on Microstructure and Texture of Ferritic Stainless Steel. 11th European Stainless Steel Conference Science & Market and the 7th European Duplex Stainless Steel Conference & Exhibition, as a single event in Bardolino (Verona) on 15th-17th June 2022, 1-8, B3 Article in conference proceedings (non-peer-reviewed).
Kurvinen E, Narsakka J, Choundhury T, Jastrzebski R & Sopanen J
Active Magnetic Bearing Positioning in the Conceptual Design Phase of a High-Speed Electric Machine. 2022 International Conference on Electrical Machines (ICEM) , Proceedings (International Conference on Electrical Machines), 2047-2053, DOI: 10.1109/icem51905.2022.9910644
Latypova R, Nyo T, Seppälä O, Fangnon E, Yagodzinskyy Y, Mehtonen S, Hänninen H, Kömi J & Pallaspuro S
Effect of Prior Austenite Grain Morphology on Hydrogen Embrittlement Behavior under Plastic Straining in As-Quenched 500 HBW Steels. 2022 23 European Conference on Fracture - ECF23, Procedia structural integrity, 42, 871-878, DOI: 10.1016/j.prostr.2022.12.110.
Narsakka J, Vostrov K, Choudhury T, Kurvinen E, Sopanen J & Pyrhonen J
Method for Mechanical Design of Squirrel Cage Slitted Solid Rotor. 2022 International Conference on Electrical Machines (ICEM), Proceedings (International Conference on Electrical Machines), 2135-2141, DOI: 10.1109/icem51905.2022.9910725
Pauna H, Aula M, Willms T, Echterhof T, Huttula M & Fabritius T
Optical Emission Spectroscopy as a Method to Improve the Process Automation of Electric Arc Furnaces and Ladle Furnaves. Cohen, Yuval , 14th IFAC Workshop on Intelligent Manufacturing Systems IMS 2022: Tel-Aviv, Israel, 28-30 March 2022, IFAC-PapersOnLine, 55, 2, 78-83, DOI: 10.1016/j.ifacol.2022.04.173
Peippo J, Ahola A, Björk T & Salminen A
Structural Performance of Laser Welded Edge Joints Made of High-Strength Steel. – IOP Conference Series: Materials Science and Engineering 1135, 012019. http://dx.doi.org/10.1088/1757-899X/1135/1/012019
Sadeghpour S, Ali M, Javaheri V, Somani M, Kömi J & Karjalainen P
Hot Deformation Behaviour of Nb Microalloyed Medium Manganese Steel During Hot Compression. Oldenburg, Mats; Hardell, Jens; Casellas, Caniel , 8th International Conference of Hot sheet metal forming of high-performance steel, CHS2: May 30th to June 2nd, 2022, Barcelona, Spain. Proceedings, 565-572.
Seppälä O, Pohjonen A, Ali M, Larkiola J & Fabritius T
Analysis of Grain Size Distribution Evolution of Steel During Recrystallization and Grain Grwoth. International Conference on Metal Forming (MF 2022) 11/09/2022 - 14/09/2022 Online , IOP conference series: materials science and engineering, 1270, 1, 012077, DOI: 10.1088/1757-899x/1270/1/012077.
Skriko T, Ahola A, Poutiainen I & Björk T
Fatigue Strength of Laser-Dressed Non-Load-Carrying Fillet Weld Joints made of Ultra-High-Strength Steel. 9th Edition of the International Conference on Fatigue Design. Procedia Structural Integrity 38, 393–400. http://dx.doi.org/10.1016/j.prostr.2022.03.040
Skriko T, Ahola A, Lipiäinen K & Björk T
Static strength capacity of single-sided fillet welds. – Current Perspectives and New Directions in Mechanics, Modelling and Design of Structural Systems (The Eight International Conference on Structural Engineering, Mechanics and Computation, SEMC2022), 1019–1024. http://dx.doi.org/10.1201/9781003348450-166.
Skriko T, Ahola A & Björk T
Design and Fabrication Factors for the Fatigue Assessment of Welded Structures. – Lecture Notes in Mechanical Engineering (Vehicle and Automotive Engineering 4, VAE 2022), 157 – 169. http://dx.doi.org/10.1007/978-3-031-15211-5_81.
Vitikka O, Iljana M, Heikkilä A, Fabritius T, Koriuchev N, Tkalenko I & Malkki A
Evaluation of the Suitability of Auger Pressing Briquettes for Blast Furnace Use. ECIC-ICSTI proceedings 2022, 1-8.

Title
2021

Alatarvas T, Jaskari M, Kaijalainen A, Koskenniska S, Asikainen J, Haapasalmi J & Välimaa K
Applicability of heat transfer and solidification simulations in investigating microstructural banding in continuously cast steel. - 9th International Conference on Modeling and Simulation of Metallurgical Processes in Steelmaking. 5-7 October 2021. Virtual conference: Book of Abstracts. Wu, Menghuai. Wien. 473-480, 144
Aravindh S, Pallaspuro S, Cao W, Somani M, Alatalo M, Huttula M & Kömi J
Effects of Alloying Elements on the Stability of ω-Fe Phase in Steel: A Density Functional Theory Study. - THERMEC 2020/2021: 11th International Conference on advanced materials. Materials Science Forum 1016. 1246-1251.
Fabritius T, Heikkinen E-P, Shu Q & Visuri V-V
Physico-chemical properties of slag in different stages of its life cycle – case studies from recent slag research.- Proceedings of the 11th International Conference on Molten Slags, Fluxes and Salts. Seoul, Republic of Korea, The Korean Institute of Metals and Materials.
Ghosh S, Mula S, Somani M & Kömi J
Fracture Toughness and Fatigue Crack Growth Characteristics of UFG Microalloyed and IF Steels Processed by Critical Phase Control Multiaxial Forging. - THERMEC 2021, the 11th International Conference on advanced materials. Materials Science Forum 1016. 481-486.
Ghosh S, Miettunen I, Somani M, Kömi J & Porter D
Nanolath martensite-austenite structures engineered through DQ&P processing for developing tough, ultrahigh strength steels. - International Conference on Multifunctional Nanomaterials (ICMN-2020), 28th-30th December, 2020. Materials today: proceedings 46: 6. 2131-2134. https://doi.org/10.1016/j.matpr.2021.02.344
Heikkilä A, Visuri V-V, Heikkinen E-P & Fabritius T
A study on the temperature dependency of the electrical conductivity of chromite pel- lets. - Proceedings of the 16th International Ferro-Alloys Conference. Sep 26-29, 2021. A.N. Wærnes, G. Tranell, M. Tangstad, E. Ringdalen, C. van der Eijk. 1-8. http://dx.doi.org/10.2139/ssrn.3926625
Hietala M, Hamada A, Keskitalo M, Jaskari M, Kumpula J & Järvenpää A
Microstructural Evolution and Tensile Strength of Laser-Welded Butt Joints of Ultra-High Strength Steels: Low and High Alloy Steels. - 19th International Conference on Sheet Metal 2021. M. Merklein; J. Duflou; L. Fratini; H. Hagenah; P. Martins; G. Meschut; F. Micari. Key engineering materials 883. 250-257. https://doi.org/10.4028/www.scientific.net/KEM.883.250
Ilmola J, Seppälä O, Haapala O, Puukko E & Larkiola J
Optimization of Slab Edge in Roughing of Stainless Steel. - Proceedings of the THERMEC’2020/2021, the 11th International Conference on Processing and Manufacturing of Advanced Materials, May 10-14, 2021 Vienna, Austria.
Javaheri V, Kaijalainen A, Pallaspuro S, Porter D & Kömi J
Promising Bendability of a New As-Rolled Medium-Carbon, Low-Alloy Steel with Isothermal Upper and Lower Bainitic Microstructure. - Proceedings of the THERMEC’2020/2021, the 11th International Conference on Processing and Manufacturing of Advanced Materials, May 10-14, 2021 Vienna, Austria.
Javaheri V, Sadeghpour S, Kaijalainen A, Kamali M & Kömi J
Effect of post-rolling cooling on the hot-rolled microstructure and texture of a new medium-carbon steel. - The 19th International Conference on Textures of Materials (ICOTOM19 2021) 1st – 4th March 2021, Virtual Conference, Japan. IOP conference series: materials science and engineering 1121, IOP Publishing, 012037.
Kaijalainen A, Mourujärvi J, Tulonen J, Steen P & Kömi J
Effect of ageing on the mechanical properties of cold formed S700 rectangular hollow. - 6th International Conference on Recent Trends in Structural Materials (COMAT 2020) 30th November - 4th December 2020, Pilsen, Czech Republi. Džugan, Jan. IOP conference series: materials science and engineering 1178, 012026. http://dx.doi.org/10.1088/1757-899X/1178/1/012026
Kaijalainen A, Javaheri V, Nousiainen O, Tulonen J, Steen P & Kömi J
Texture Evolution During Cold Forming of Rectangular Hollow Section. - The 19th International Conference on Textures of Materials (ICOTOM19 2021) 1st – 4th March 2021, Virtual Conference, Japan. IOP conference series: materials science and engineering 1121, IOP Publishing, 012005.
Kaijalainen A, Mourujärvi J, Tulonen J, Steen P & Kömi J
Improvement on Impact Toughness of Cold Formed S420 Steel by Direct Quenching. - Proceedings of the THERMEC’2020/2021, the 11th International Conference on Processing and Manufacturing of Advanced Materials, May 10-14, 2021 Vienna, Austria.
Keskitalo M, Hamada A, Hietala M, Jaskari M & Järvenpää A
Microstructure and Formability of Laser Welded Dissimilar Butt Joints of Austenitic-Ferritic Stainless Steels. - 19th International Conference on Sheet Metal 2021. M. Merklein; J. Duflou; L. Fratini; H. Hagenah; P. Martins; G. Meschut; F. Micari. Key engineering materials 883. 258-265. https://doi.org/10.4028/www.scientific.net/KEM.883.258
Louhenkilpi S, Laukka A, Miettinen J, Norrena J, Visuri V-V, Alatarvas T, Fabritius T & Piipponen E
Online 3D heat transfer and solidification/microstructure models and their capabilities for simulation of continuous casting of steel and quality prediction. - Proceedings of the 9th International Conference on Modeling and Simulation of Metallurgical Processes in Steelmaking. 5-7 October 2021. Virtual conference. Wu, Menghuai. Wien. 413-421
Louhenkilpi S, Visuri V-V, Miettinen J & Fabritius T
Application of the IDS solidification and microstructure tool for quality prediction in continuous casting of steel with novel phenomenological quality criteria. - Proceedings of the 10th European Conference on Continuous Casting, 20-22 October 2021, Bari, Italy. Bari, Associazione Italiana di Metallurgia, C_127
Miettunen I, Ghosh S, Somani M, Pallaspuro S, Porter D & Kömi J
Effect of Silicon Content on the Decomposition of Austenite in 0.4C Steel during Quenching and Partitioning Treatment. - THERMEC 2021, the 11th International Conference on advanced materials. Materials Science Forum 1016. 10361-1367.
Miettunen I, Ghosh S, Somani M, Pallaspuro S, Porter D & Kömi J
Effect of Silicon Content on the Decomposition of Austenite in 0.4C Steel during Quenching and Partitioning Treatment. - THERMEC 2021, the 11th International Conference on advanced materials. Materials Science Forum 1016. 10361-1367. https://doi.org/10.4028/www.scientific.net/MSF.1016.1361
Miettunen I, Ghosh S, Somani M, Pallaspuro S & Kömi J
Competitive mechanisms occurring during quenching and partitioning of three silicon variants of 0.4 wt.% carbon steels. - Journal of Materials Research and Technology 11 (March–April), 1045-1060. https://doi.org/10.1016/j.jmrt.2021.01.085
Mustakangas A, Hamada A & Järvenpää A
Enhancement of the compressive strength of 3d-printed polylactic acid (Pla) by controlling internal pattern. - Materials Science Forum (Volume 1023). Agarwal R.K.. Materials Science Forum. 75-81. https://doi.org/10.4028/www.scientific.net/MSF.1023.75
Nyo T, Kaijalainen A, Hannula J & Kömi J
Investigation of CGHAZ Simulations of Low-Carbon Bainitic Steels. - Proceedings of the THERMEC’2020/2021, the 11th International Conference on Processing and Manufacturing of Advanced Materials, May 10-14, 2021 Vienna, Austria.
Pallaspuro S, Miettunen I, Aravindh S, Ghosh S, Cao W, Somani M & Kömi J
The Multiphase Micro- and Nanostructures of 0.2 and 0.4 C Direct-Quenched and Partitioned Steels. - THERMEC 2020/2021: 11th International Conference on advanced materials. Materials Science Forum 1016. 1097-1102.
Pauna H, Aula M, Huttula M & Fabritius T
Optical emission spectroscopy in electric arc furnaces and ladle furnaces – from laboratory to industrial applications. - 4th European Academic Symposium on EAF Steelmaking Abstract booklet, 16-18 June 2021. European Academic Symposium on EAF Steelmaking. 32-34. https://www.eases.rwth-aachen.de/wp-content/uploads/2021/06/EASES-2021-…
Pohjonen A, Koskenniska S, Uusitalo J, Nyo T, Larkiola J & Kömi J
Application of Image Analysis Method Combined with Microhardness Measurement to Determine Phase Fractions. - THERMEC 2021, the 11th International Conference on advanced materials. Materials Science Forum 1016. 1153-1158.
Pohjonen A
Solving partial differential equations in deformed grids by estimating local average gradients with planes. - Journal of Physics: Conference Series, Volume 2090, 10th International Conference on Mathematical Modeling in Physical Sciences (IC-MSQUARE 2021), 6-9 September 2021, Greece (Virtual). Journal of physics : Conference series 2090, 012069. https://iopscience.iop.org/article/10.1088/1742-6596/2090/1/012069
Pokka A-P, Arola A-M, Kaijalainen A, Kesti V & Larkiola J
Strain distribution during air bending of ultra-high strength steels. - ESAFORM 2021 proceedings. ESAFORM. 1-7.
Rautio T, Mäkikangas J, Kumpula J, Järvenpää A & Hamada A
Laser Welding of Laser Powder Bed Fusion Manufactured Inconel 718: Microstructure and Mechanical Properties. - 19th International Conference on Sheet Metal 2021. M. Merklein; J. Duflou; L. Fratini; H. Hagenah; P. Martins; G. Meschut; F. Micari. Key engineering materials 883. 234-241. https://doi.org/10.4028/www.scientific.net/KEM.883.234
Seppälä O, Ilmola J & Larkiola J
Industrial FE-simulation of roughing using an automatic solver shifting technique. - Materials Science Forum Vol. 1016. Materials Science Forum. 1312-1317. https://doi.org/10.4028/www.scientific.net/MSF.1016.1312
Shu Q, Visuri V-V, Alatarvas T & Fabritius T
A model for inclusion precipitation kinetics during solidification of steel. - Proceedings of the 10th European Conference on Continuous Casting, 20-22 October 2021, Bari, Italy. Bari, Italy, Associazione Italiana di Metallurgia, CC_123
Visuri V-V, Heikkinen E-P, Kärnä A, Sulasalmi P & Fabritius T
Numerical modelling of AOD slag structure during cooling. Proceedings of the 11th International Conference on Molten Slags, Fluxes and Salts. Feb 21-25, 2021. Seoul, The Korean Institute of Metals and Materials.
Visuri V-V, Hekkala L, Aula M & Fabritius T
Development of a modular mathematical model for the EAF process. - Proceedings of the 4th European Academic Symposium on EAF Steelmaking. 16-18 June 2021. Department for Industrial Furnaces and Heat Engineering, RWTH Aachen University.
Visuri V-V, Heikkinen E-P, Kaisto J, Harju A, Mattila R, Kupari P, Ikäheimonen T & Fabritius T
The Effect of the MgO Content of Slag on its Penetrability into the Refractory Lining in a Ferrochrome Converter. - Proceedings of the 16th International Ferro-Alloys Conference. Sep 26-29, 2021. Trondheim.
Visuri V-V, Kunelius J, Puukko E & Fabritius T
An experimental study of the formation of surface agglomerates in a submerged arc furnace. - Proceedings of the 16th International Ferro-Alloys Conference. Sep 26-29, 2021.
Visuri V-V, Aula M, Ringel A & Fabritius T
Towards dynamic modeling of the EAF process. - EEC 2021. Proceedings of the 12th European Electric Steelmaking Conference.13-14 September 2021. Hybrid: Sheffield, UK & Online. Sheffield, Iso-Britannia, Institute of Materials, Minerals and Mining. 351-359
Visuri V-V, Heikkinen E-P & Fabritius T
Dynamic changes in slag properties during the reduction stage of the AOD process.. - Proceedings of the 9th International Conference on Modeling and Simulation of Metallurgical Processes in Steelmaking. 5-7 October 2021. Virtual conference. Wu, Menghuai. 101-110

CASR's Publications

Journals

Title
2023

Title
2022

Title
2021

Conferences

Title
2023

Title
2022

Title
2021

Centre for Advanced Steels Research

You might also be interested in

Jultika repository

Postal address

Street address

CASR's Publications

Journals

Title 2023

Title 2022

Title 2021

Conferences

Title 2023

Title 2022

Title 2021

Centre for Advanced Steels Research

You might also be interested in

Jultika repository

Title
2023

Title
2022

Title
2021

Title
2023

Title
2022

Title
2021