2019
- Hietala M, Keskitalo M, Järvenpää A & Mäntyjärvi K
Mechanical testing of friction drilled and form tapped bolt joints for abrasion resistant steel applications. - Proceedings of the 22nd International ESAFORM Conference on Material Forming (ESAFORM 2019). Galdos, Lander; Arrazola, Pedro; Saenz de Argandona, Eneko; Otegi, Nagore; Mendiguren, Joseba; Madariaga, Aitor; Saez de Buruaga, Mikel. AIP Conference Proceedings 2113, 050025. - Iso-Junno T, Jokelainen T, Jaskari M, Keskitalo M & Mäntyjärvi K
The effect of processing parameters on formability of 3D printed AISI 316L. - Proceedings of the 22nd international Esaform Conference On Material Forming: ESAFORM 2019. AIP Conference Proceedings 2113, 150010. - Jokelainen T, Iso-Junno T, Järvenpää A, Mustakangas A, Keskitalo M & Mäntyjärvi K
Formability of selective laser melted AlSi10Mg. - Proceedings of the 22nd International ESAFORM Conference on Material Forming (ESAFORM 2019). Galdos, Lander; Arrazola, Pedro; Saenz de Argandona, Eneko; Otegi, Nagore; Mendiguren, Joseba; Saez de Buruaga, Mikel; Madariaga, Aitor. AIP Conference Proceedings 2113, 150011. - Järvenpää A, Jaskari M, Keskitalo M, Mäntyjärvi K & Karjalainen P
Comparison of the formability of austenitic reversion-treated and temper-rolled 17Cr-7Ni steels, Proceeding of the 22nd International Esaform Conference on Material Forming: Esaform 2019 [0-7354-1847-0] Järvenpää, A v:2019, AIP Conference Proceedings 2113,160008 - Järvenpää A & Karjalainen P
An overview of mechanical properties of today’s grain-refined austenitic stainless steels. - ESSC & DUPLEX 2019, 10th European Stainless Steel Conference : Book of Abstracts. The Austrian Society for Metallurgy and Materials, 32.
Proceedings of the European Stainless Steel Conference & DUPLEX 2019, Vienna, September 30 - October 2, 2019 Copyright © ESSC & DUPLEX 2019 - ASMET. - Keskitalo M, Hietala M & Mäntyjärvi K
The geometrical fine adjustment of circular honeycomb structure using laser welding. - Proceedings of the 22nd International Esaform Conferenee On Material Forming: ESAFORM 2019. Galdos, Lander; Arrazola, Pedro; Saenz de Argandona, Eneko; Otegi, Nagore; Mendiguren, Joseba; Madariaga, Aitor; Saez de Buruaga, Mikel. AIP Conference Proceedings 2113, 070001. - Mustakangas A, Iso-Junno T, Jokelainen T, Keskitalo M & Mäntyjärvi K
Forming and formability of 3D printed thermoplastics. - Proceedings of the 22nd International ESAFORM Conference on Material Forming (ESAFORM 2019). Galdos, Lander; Arrazola, Pedro; Saenz de Argandona, Eneko; Otegi, Nagore; Mendiguren, Joseba; Saez de Buruaga, Mikel; Madariaga, Aitor. AIP Conference Proceedings 2113, AIP Publishing, 150012. - Mäntyjärvi K, Iso-Junno T, Mustakangas A, Jokelainen T, Keskitalo M & Järvenpää A
Exploitation of forming of the 3D printed materials. - Proceedings of the 22nd International ESAFORM Conference on Material Forming, ESAFORM 2019. Galdos, Lander; Arrazola, Pedro; Saenz de Argandona, Eneko; Otegi, Nagore; Mendiguren, Joseba; Madariaga, Aitor; Saez de Buruaga, Mikel. AIP Conference Proceedings 2113, 150007.
2018
- Jaskari M, Järvenpää A & Karjalainen P
The Effect of Heating Rate on Texture and Formability of Ti-Nb Stabilized Ferritic Stainless Steel. Key Engineering Materials.ISSN: 1662-9795, Vol. 786, pp 3-9. doi:10.4028/www.scientific.net/KEM.786.3 - Järvenpää A, Jaskari M & Karjalainen L
Cyclic Behavior of Reversion-Treated Structures after Different Cold Rolling Reductions in an AISI 301LN Stainless Steel. Key Engineering Materials. ISSN: 1662-9795, Vol. 786, pp 52-56 doi:10.4028/www.scientific.net/KEM.786.52 - Man J, Järvenpää A, Jaskari M, Kuběna I, Fintová S, Chlupová A, Karjalainen L & Polák J
Cyclic deformation behaviour and stability of grain-refined 301LN austenitic stainless structure, MATEC Web of Conferences 165, 06005 (2018) FATIGUE 2018.
2016
- Hietala M, Keskitalo M, Järvenpää A, Saine K, Karjalainen P & Mäntyjärvi K
Mechanical behaviour of laser welded corrugated panels of ultrahigh strength steel, NT2F16-conference, 2016. - Järvenpää A, Jaskari M & Karjalainen P
Grain size and austenite stability in fatigue of a reversion-treated 301LN type stainless steel, Extended abstract, NT2F16-conference, 2016. - Man J, Kuběna I, Smaga M, Man O, Järvenpää A, Weidner A, Chlup Z & Polák J
Microstructural changes dur-ing deformation of AISI 300 grade austenitic stainless steels: Impact of chemical heterogeneity, 21st European Conference on Fracture, ECF21, 20-24 June 2016, Catania, Italy, Structural Integrity Procedia 2, 2016, 2299-2306.
2013
- Järvenpää A, Kiuru T, Määttä A, Jaskari M, Mäntyjärvi K
Optimization of Local Laser Heat Treatment Process us-ing a Simple FE-model, Proceedings of the 7th ICPNS conference in Oulu (2013). - Sundqvist J, Eriksson I, Kaplan A, Keskitalo M, Mantyjarvi K, Granstrom J & Sundin K-G
Measuring the influence of laser welding on fatigue crack propagation in high strength steel. ICALEO 2013 - 32nd International Congress on Applications of Lasers and Electro-Optics. Stefan Kaierle.m The Laser Institute of America. 647-654.
2012
- Kantola J, Järvenpää A, Jaskari M, Mäntyjärvi K & Karjalainen J
Influence of plasma, laser and waterjet cutting on fatigue life of austenitic-ferritic stainless steel. XVI Internationational Colloquium "Mechanical Fatigue of Met-als", September 24 - 26, 2012, Brno, Czech Republic. - Heikkala J & Väisänen A
Usability testing of ultra high-strength steels, The ASME 2012 11th Biennal Conference on Engineering Systems Design and Analysis (ESDA 2012), July 2-4, 2012 Nantes, France. - Järvenpää A, Karjalainen P & Jaskari M
Effect of grain size on fatigue behavior of type 301LN stainless steel, XVI International Colloquium "Mechanical Fatigue of Metals" Conf. Sept. 24-26, 2012, Brno, Czech Republic
2011
- Järvenpää A, Mäntyjärvi K, Merklein M, Määttää A, Hietala M & Karjalainen J
Mechanical Properties of Laser Heat Treated 6 mm Thick UHSS-Steel. In: Menary, G. (Edt.): The 14th International ESAFORM Conference on Mate-rial Forming, 1353(2011), AIP Conference Proceedings, pp. 1319-1324. - Järvenpää A, Karjalainen P & Mäntyjärvi K
Passive laser assisted bending of ultra-high strength steels, 2nd ICAMPP, The 2nd 2011 International Conference on Advances in Materials and Manufacturing Processes, Dec. 16-18, 2011, Guilin, China, (2011).
2009
- Mäntyjärvi K, Väisänen A & Karjalainen J.
Cutting Method Influence On The Fatigue Resistance Of Ultra-High-Strength Steel, International Journal of Mate-rial Forming, Volume 2, Supplement 1 / August, 2009, pp 547-550, December 23, 2009, Springer Paris. - Keskitalo M & Mäntyjärvi K
The Static and Dynamic Strength Properties of Laser Welded Work Hardened Stainless Steel, Proceedings of the 12th NOLAMP Conference in Laser Processing of Materials, 24th-26th of August 2009, Copen-hagen, Denmark. - Mäkikangas J, Mäntyjärvi K & Ojala J
Joining of Colour-Coated Sheet Metals With Yb:Yag Disk Laser, Proceedings of the 12th NOLAMP Conference in Laser Processing of Materials, 24th-26th of August 2009, Copenhagen, Denmark. - Mäntyjärvi K, Karjalainen J, Järvenpää A, Ojala J, Keskitalo M & Mäkikangas J
Water Cooling in Sheet Metal Laser Hardening, Proceedings of the 12th NOLAMP Conference in Laser Processing of Materials, 24th-26th of August 2009, Copenhagen, Denmark.
2008
- Mäntyjärvi K, Tulonen J, Saarnivuo T & Karjalainen J
Properties of Grid Patterns Produced by Laser for Strain Analysis, Proceedings of the IDDRG 2008 International Conference, June 2008, Olofström, Sweden, ISBN 978-91-633-2944-7. - Mäntyjärvi K, Tulonen J, Saarnivuo T, Porter J & Karjalainen J
Grid Patterns by Laser for Forming Strain Analysis, International Journal of Material Forming, Proceedings of the 11th ESAFORM conference on Material Forming, April 2008, Lyon, France, pp 329-332, ISSN 1960-6206.
2007
- Keskitalo M, Mäntyjärvi K, Mäkikangas J, Karjalainen J, Leiviskä A & Heikkala J
Local Laser Heat Treatments Of Ultrahigh Strength Steel, Proceedings of the 11th NOLAMP Conference in Laser Processing of Materials, August 2007, Lappeenranta, Finland, pp 536-543, ISBN 978-952-214-412-6. - Laitinen R, Kömi J, Keskitalo M & Mäkikangas J
Improvement of the strenght of welded joints in ultra-high-strength OPTIM 960 QC using autogenous Yb:YAG laser welding, Proceedings of the 11th NOLAMP Conference in Laser Processing of Materials, August 2007, Lap-peenranta, pp 204-215, Finland, ISBN 978-952-214-412-6. - Mäntyjärvi K, Leiviskä A, Karjalainen J, Keskitalo M, Heikkala J & Mäkikangas J
Local Laser Heat Treatments In Bending Ultra-High Strength Steel, Proceedings of the 11th NOLAMP Conference in Laser Processing of Materials, August 2007, Lappeenranta, Finland, pp 291-297, ISBN 978-952-214-412-6. - Mäntyjärvi K, Karjalainen J, Leiviskä A, Mäkikangas J, Keskitalo M & Niemelä J
Local Laser Heat Treatments In Making Tailored Strength Steel Constructions, Proceedings of the 11th NOLAMP Conference in Laser Processing of Materials, August 2007, Lappeenranta, Finland, pp 315-322, ISBN 978-952-214-412-6. - Mäkikangas J, Mäntyjärvi K, Keskitalo M, Karjalainen J, Niemelä J & Ojala J
Laser Welding Of Coated Sheet Metal Constructions, Proceedings of the 11th NOLAMP Conference in Laser Pro-cessing of Materials, August 2007, Lappeenranta, Finland, pp 340-348, ISBN 978-952-214-412-6. - Mäntyjärvi K, Karjalainen J, Leiviskä A, Keskitalo M, Mäkikangas J & Ojala J
Laser-Assisted Processes – More Speed And Less Force For Manufacturing Processes, Proceedings of the 11th NOLAMP Conference in Laser Processing of Materials, August 2007, Lappeenranta, pp 544-553, Finland, ISBN 978-952-214-412-6 - Porter J, Heikkala J, Mäntyjärvi K & Karjalainen J
Combined Laser Micro-Forming And Machining Of Sheet Metal, Proceedings of the 11th NOLAMP Conference in Laser Processing of Materials, August 2007, Lappeenranta, Finland, pp 493-501, ISBN 978-952-214-412-6.
Last updated: 9.3.2020