University of Oulu, 2016

Publications 2017


45.Kordas, K.
Grand Challenges in Translational Materials Research. 
Front. Mater. 4:38. 
doi: 10.3389/fmats.2017.00038

44. Induja, I.J., Varma, M.R., Sebastian, M.T.
Preparation, characterization and properties of alumina-lithium aluminium borosilicate glass based LTCC tapes
Journal of Materials Science: Materials in Electronics, 28 (19), pp 14655-14663
DOI: 10.1007/s10854-017-7330-7

43. Pham, T.N., Sharifi, T., Sandström, R., Siljebo, W., Shchukarev, A., Kordas, K., Wågberg, T., Mikkola, J.-P.
Robust hierarchical 3D carbon foam electrode for efficient water electrolysis
Scientific Reports, 7(1) art. no. 6112
DOI: 10.1038/s41598-017-05215-1

42. Pitkänen, O., Järvinen, T., Cheng, H., Lorite, G.S., Dombovari, A., Rieppo, L., Talapatra, S., Duong, H.M., Tóth, G., Juhász, K.L., Kónya, Z., Kukovecz, A., Ajayan, P.M., Vajtai, R., Kordás, K.
On-chip integrated vertically aligned carbon nanotube based super- and pseudocapacitors
Scientific Reports, 7(1) art. no. 16604
DOI: 10.1038/s41598-017-16604-x

41. Bukhanko, N., Schwarz, C., Samikannu, A., Pham, T.N., Siljebo, W., Wärnå, J., Shchukarev, A., Rautio, A.-R., Kordás, K., Mikkola, J.-P.
Gas phase synthesis of isopropyl chloride from isopropanol and HCl over alumina and flexible 3-D carbon foam supported catalysts
(2017) Applied Catalysis A: General, vol. 542, pp. 212-225
DOI: 10.1016/j.apcata.2017.05.013

40. Järvinen, T., Lorite, G.S., Rautio, A.-R., Juhász, K.L., Kukovecz, Á., Kónya, Z., Kordas, K., Toth, G.
Portable cyber-physical system for indoor and outdoor gas sensing
(2017) Sensors and Actuators, B: Chemical, vol 252, pp. 983-990
DOI: 10.1016/j.snb.2017.06.102

39. Dejneka, A., Tyunina, M.
Elasto-optic behaviour in epitaxial films of perovskite oxide ferroelectrics
(2017) Advances in Applied Ceramics, 117 (2), pp. 62-65
DOI: 10.1080/17436753.2017.1366734

38. Chernova, E., Brooks, C., Chvostova, D., Bryknar, Z., Dejneka, A., Tyunina, M.
Optical NIR-VIS-VUV constants of advanced substrates for thin-film devices
(2017) Optical Materials Express, 7 (22), art. no. 301451
DOI: 10.1364/OME.7.003844

37. Birks, E., Dunce, M., Peräntie, J., Hagberg, J., Sternberg, A.
Direct and indirect determination of electrocaloric effect in Na0.5Bi0.5TiO3
(2017) Journal of Applied Physics, 121 (22), art. no. 224102
DOI: 10.1063/1.4985067

36. Poikselkä, K., Leinonen, M., Palosaari, J., Vallivaara, I., Röning, J., Juuti, J.
Novel genetically optimised high-displacement piezoelectric actuator with efficient use of active material
(2017) Smart Materials and Structures, 26 (9), art. no. 095022
DOI: 10.1088/1361-665X/aa770a

35. Akbari, M.,  He, H.,  Juuti, J.,  Tentzeris, M.M.,  Virkki, J., Ukkonen, L.
3D Printed and Photonically Cured Graphene UHF RFID Tags on Textile, Wood, and Cardboard Substrates
(2017) International Journal of Antennas and Propagation, art. no. 7327398
DOI: 10.1155/2017/7327398

34. Chen, M.-Y., Juuti, J., Jantunen, H.
Sintering behavior, microstructure and dielectric performance of BaTiO3 with 60–65 wt% addition of B2O3-Bi2O3-SiO2-ZnO glass
(2017) Journal of Alloys and Compounds, vol. 737, pp. 392-397
DOI: 10.1016/j.jallcom.2017.12.099

33. Reinecke, T.,  Biechele, P.,  Sobocinski, M.,  Suhr, H.,  Bakes, K.,  Solle, D.,  Jantunen, H.,  Scheper, T.,  Zimmermann, S.
Continuous noninvasive monitoring of cell growth in disposable bioreactors
(2017) Sensors and Actuators, B: Chemical, Vol.251, pp. 1009-1017
DOI: 10.1016/j.snb.2017.05.111

32. Varghese, J., Vahera, T., Ohsato, H., Iwata, M., Jantunen, H.
Novel low-temperature sintering ceramic substrate based on indialite/cordierite glass ceramics
(2017) Japanese Journal of Applied Physics 56 (10), art. no. 10PE01
DOI: 10.7567/JJAP.56.10PE01

31. Tolvanen, J., Hannu, J., Jantunen, H.
Hybrid foam pressure sensor utilizing piezoresistive and capacitive sensing mechanisms
(2017) IEEE Sensors Journal 17 (15), art. no. 7954595, pp. 4735-4746
DOI: 10.1109/JSEN.2017.2718045

30. Leinonen, M., Palosaari, J., Juuti, J., Jantunen, H.
Axle mounted piezoelectric energy harvester for continuous energy harvesting from rotation and vibration
(2017) WCCM 2017 - 1st World Congress on Condition Monitoring 2017 

29. Varghese, J., Siponkoski, T., Nelo, M., Sebastian, M.T., Jantunen, H.
Microwave dielectric properties of low-temperature sinterable α-MoO3
(2017) Journal of the European Ceramic Society,
DOI: 10.1016/j.jeurceramsoc.2017.11.027

28. Samassekou, H., Alkabsh, A., Wasala, M., Eaton, M., Walber, A., Walker, A., Pitkänen, O., Kordas, K., Talapatra, S., Jayasekera T.
Viable route towards large-area 2D MoS2 using magnetron sputtering
(2017) 2D materials, 4, 021002
DOI: 10.1088/2053-1583/aa5290

27. Sonkki, M., Myllymäki, S., Putaala, J., Heikkinen, E., Haapala, T., Posti, H., Jantunen, H.
Dual Polarized Dual Fed Vivaldi Antenna for Cellular Base Station Operating at 1.7–2.7 GHz
(2017)International Journal of Antennas and Propagation, Article ID 1304359, 8 pages

26. Bai, Y., Tofel, P., Palosaari, P., Jantunen, H., Juuti, J.
A Game Changer: A Multifunctional Perovskite Exhibiting Giant Ferroelectricity and Narrow Bandgap with Potential Application in a Truly Monolithic Multienergy Harvester or Sensor
(2017) Advanced materials,1700767

25. Guha, D., Ganguly, D., George, S., Kumar, C., Sebastian, M., Antar, Y.M.M.
A New Design Approach for a Hybrid Monopole to Achieve Increased Ultrawide Bandwidth [Antenna Designer's Notebook]
(2017) IEEE Antennas and Propagation Magazine, 59 (1), art. no. 7839355, pp. 139-144.
DOI: 10.1109/MAP.2016.2629180

24. Jelínek, M., Vaněk, P., Tolde, Z., Buixaderas, E., Kocourek, T., Studnička, V., Drahokoupil, J., Petzelt, J., Remsa, J., Tyunina, M.
PLD prepared bioactive BaTiO3 films on TiNb implants
(2017) Materials Science and Engineering C, 70, pp. 334-339.
DOI: 10.1016/j.msec.2016.08.072

23. Lorite, G.S., Rocha, J.M., Miilumäki, N., Saavalainen, P., Selkälä, T., Morales-Cid, G., Gonçalves, M.P., Pongrácz, E., Rocha, C.M.R., Toth, G.
Evaluation of physicochemical/microbial properties and life cycle assessment (LCA) of PLA-based nanocomposite active packaging
(2017) LWT - Food Science and Technology, 75, pp. 305-315.
DOI: 10.1016/j.lwt.2016.09.004

22. Lorite, G.S., Selkälä, T., Sipola, T., Palenzuela, J., Jubete, E., Viñuales, A., Cabañero, G., Grande, H.J., Tuominen, J., Uusitalo, S., Hakalahti, L., Kordas, K., Toth, G.
Novel, smart and RFID assisted critical temperature indicator for supply chain monitoring
(2017) Journal of Food Engineering, 193, pp. 20-28.
DOI: 10.1016/j.jfoodeng.2016.06.016

21. Biasi, P., Mikkola, J.-P., Sterchele, S., Salmi, T., Gemo, N., Shchukarev, A., Centomo, P., Zecca, M., Canu, P., Rautio, A.-R., Kordàs, K.
Revealing the role of bromide in the H2O2 direct synthesis with the catalyst wet pretreatment method (CWPM)
(2017) AIChE Journal, 63 (1), pp. 32-42.
DOI: 10.1002/aic.15382

20. Namitha, L.K., Sebastian, M.T.
High permittivity ceramics loaded silicone elastomer composites for flexible electronics applications
(2017) Ceramics International, 43 (3), pp. 2994-3003.
DOI: 10.1016/j.ceramint.2016.11.080

19. Roshni, S.B., Sebastian, M.T., Surendran, K.P.
Can zinc aluminate-titania composite be an alternative for alumina as microelectronic substrate
(2017) Scientific Reports, 7, art. no. 40839
DOI: 10.1038/srep40839

18. Induja, I.J., Surendran, K.P., Varma, M.R., Sebastian, M.T.
Low κ, low loss alumina-glass composite with low CTE for LTCC microelectronic applications
(2017) Ceramics International, 43 (1), pp. 736-740.
DOI: 10.1016/j.ceramint.2016.10.002

17. Kähäri, H., Ramachandran, P., Juuti, J., Jantunen, H.
Room-temperature-densified Li2MoO4 ceramic patch antenna and the effect of humidity
(2017) International Journal of Applied Ceramic Technology, 14 (1), pp. 50-55.
DOI: 10.1111/ijac.12615

16. Gartnerova, V., Pacherova, O., Klinger, M., Jelinek, M., Jager, A., Tyunina, M.
Strain fluctuations in BaTiO3/SrTiO3 heterostructures
(2017) Materials Research Bulletin, 89, pp. 180-184.
DOI: 10.1016/j.materresbull.2017.01.048

15. Molin, C., Peräntie, J., Le Goupil, F., Weyland, F., Sanlialp, M., Stingelin, N., Novak, N., Lupascu, D.C., Gebhardt, S.
Comparison of direct electrocaloric characterization methods exemplified by 0.92 Pb(Mg1/3Nb2/3)O3-0.08 PbTiO3 multilayer ceramics
(2017) Journal of the American Ceramic Society, . Article in Press.
DOI: 10.1111/jace.14805

14. Joseph, N., Varghese, J., Sebastian, M.T.
In situ polymerized polyaniline nanofiber-based functional cotton and nylon fabrics as millimeter-wave absorbers
(2017) Polymer Journal, 49 (4), pp. 391-399.
DOI: 10.1038/pj.2016.121

13. Joseph, N., Varghese, J., Sebastian, M.T.
Graphite reinforced polyvinylidene fluoride composites an efficient and sustainable solution for electromagnetic pollution
(2017) Composites Part B: Engineering, 123, pp. 271-278.
DOI: 10.1016/j.compositesb.2017.05.030

12. Väätäjä, M., Kähäri, H., Juuti, J., Jantunen, H.
Li2MoO4-based composite ceramics fabricated from temperature- and atmosphere-sensitive MnZn ferrite at room temperature
(2017) Journal of the American Ceramic Society, . Article in Press.
DOI: 10.1111/jace.14914

11. Gbotemi, O., Myllymäki, S., Juuti, J., Teirikangas, M., Jantunen, H., Macek, M., Suvorov, D., Sloma, M., Jakubowska, M.
Microwave Characterization of Printed Inductors with Ferrimagnetic BaFe12O19 Composite Layers
(2017) IEEE Transactions on Magnetics, 53 (2), art. no. 7588117
DOI: 10.1109/TMAG.2016.2616468

10. Bai, Y., Siponkoski, T., Peräntie, J., Jantunen, H., Juuti, J.
Ferroelectric, pyroelectric, and piezoelectric properties of a photovoltaic perovskite oxide
(2017) Applied Physics Letters, 110 (6), art. no. 063903
DOI: 10.1063/1.4974735

9. Chen, M.-Y., Vahera, T., Hsi, C.-S., Sobocinski, M., Teirikangas, M., Peräntie, J., Juuti, J., Jantunen, H.
Tape casting system for ULTCCs to fabricate multilayer and multimaterial 3D electronic packages with embedded electrodes
(2017) Journal of the American Ceramic Society, 100 (4), pp. 1257-1260.
DOI: 10.1111/jace.14639

8. Chen, M.-Y., Juuti, J., Hsi, C.-S., Jantunen, H.
Sintering behavior and characteristics study of BaTiO3 with 50 wt% of B2O3-Bi2O3-SiO2-ZnO glass
(2017) Journal of the European Ceramic Society, 37 (4), pp. 1495-1500.
DOI: 10.1016/j.jeurceramsoc.2016.10.036

7. Induja, I.J., Sebastian, M.T.
Microwave dielectric properties of mineral sillimanite obtained by conventional and cold sintering process
(2017) Journal of the European Ceramic Society, 37 (5), pp. 2143-2147. Cited 1 time.
DOI: 10.1016/j.jeurceramsoc.2017.01.007

6. Arun, S., Sebastian, M.T., Surendran, K.P.
Li2ZnTi3O8 based High κ LTCC tapes for improved thermal management in hybrid circuit applications
(2017) Ceramics International, 43 (7), pp. 5509-5516.
DOI: 10.1016/j.ceramint.2017.01.073

5. Induja, I.J., Sebastian, M.T.
Microwave dielectric properties of SnO-SnF2-P2O5 glass and its composite with alumina for ULTCC applications
(2017) Journal of the American Ceramic Society, . Article in Press.
DOI: 10.1111/jace.14804

4. Hajimammadov, R., Csendes, Z., Ojakoski, J.-M., Lorite, G.S., Mohl, M., Kordas, K.
Nonlinear electronic transport and enhanced catalytic behavior caused by native oxides on Cu nanowires
2017) Surface Science, 663, pp. 16-22.
DOI: 10.1016/j.susc.2017.04.011

3. Al-Asadi, A.S., Henley, L.A., Wasala, M., Muchharla, B., Perea-Lopez, N., Carozo, V., Lin, Z., Terrones, M., Mondal, K., Kordas, K., Talapatra, S.
Aligned carbon nanotube/zinc oxide nanowire hybrids as high performance electrodes for supercapacitor applications
(2017) Journal of Applied Physics, 121 (12), art. no. 124303, .
DOI: 10.1063/1.4979098

2. Wu, M.-C., Chen, C.-H., Huang, W.-K., Hsiao, K.-C., Lin, T.-H., Chan, S.-H., Wu, P.-Y., Lu, C.-F., Chang, Y.-H., Lin, T.-F., Hsu, K.-H., Hsu, J.-F., Lee, K.-M., Shyue, J.-J., Kordás, K., Su, W.-F.
Improved Solar-Driven Photocatalytic Performance of Highly Crystalline Hydrogenated TiO 2 Nanofibers with Core-Shell Structure
(2017) Scientific Reports, 7, art. no. 40896
DOI: 10.1038/srep40896

1. Putaala J., Niittynen J., Hannu J., Kunnari E., Mäntysalo M., Hagberg J., Jantunen H.,
Capability Assessment of Inkjet Printing for Reliable RFID Applications
(2017) IEEE Transactions on Device and Materials Reliability, vol. 17, no. 2, pp. 281-290, June 2017.
doi: 10.1109/TDMR.2016.2636342

Last updated: 4.6.2018